org.hibernate.envers.tools
Class ConcurrentReferenceHashMap<K,V>

java.lang.Object
  extended by java.util.AbstractMap<K,V>
      extended by org.hibernate.envers.tools.ConcurrentReferenceHashMap<K,V>
Type Parameters:
K - the type of keys maintained by this map
V - the type of mapped values
All Implemented Interfaces:
Serializable, ConcurrentMap<K,V>, Map<K,V>

public class ConcurrentReferenceHashMap<K,V>
extends AbstractMap<K,V>
implements ConcurrentMap<K,V>, Serializable

An advanced hash table supporting configurable garbage collection semantics of keys and values, optional referential-equality, full concurrency of retrievals, and adjustable expected concurrency for updates. This table is designed around specific advanced use-cases. If there is any doubt whether this table is for you, you most likely should be using ConcurrentHashMap instead. This table supports strong, weak, and soft keys and values. By default keys are weak, and values are strong. Such a configuration offers similar behavior to WeakHashMap, entries of this table are periodically removed once their corresponding keys are no longer referenced outside of this table. In other words, this table will not prevent a key from being discarded by the garbage collector. Once a key has been discarded by the collector, the corresponding entry is no longer visible to this table; however, the entry may occupy space until a future table operation decides to reclaim it. For this reason, summary functions such as size and isEmpty might return a value greater than the observed number of entries. In order to support a high level of concurrency, stale entries are only reclaimed during blocking (usually mutating) operations. Enabling soft keys allows entries in this table to remain until their space is absolutely needed by the garbage collector. This is unlike weak keys which can be reclaimed as soon as they are no longer referenced by a normal strong reference. The primary use case for soft keys is a cache, which ideally occupies memory that is not in use for as long as possible. By default, values are held using a normal strong reference. This provides the commonly desired guarantee that a value will always have at least the same life-span as it's key. For this reason, care should be taken to ensure that a value never refers, either directly or indirectly, to its key, thereby preventing reclamation. If this is unavoidable, then it is recommended to use the same reference type in use for the key. However, it should be noted that non-strong values may disappear before their corresponding key. While this table does allow the use of both strong keys and values, it is recommended to use ConcurrentHashMap for such a configuration, since it is optimized for that case. Just like ConcurrentHashMap, this class obeys the same functional specification as Hashtable, and includes versions of methods corresponding to each method of Hashtable. However, even though all operations are thread-safe, retrieval operations do not entail locking, and there is not any support for locking the entire table in a way that prevents all access. This class is fully interoperable with Hashtable in programs that rely on its thread safety but not on its synchronization details.

Retrieval operations (including get) generally do not block, so may overlap with update operations (including put and remove). Retrievals reflect the results of the most recently completed update operations holding upon their onset. For aggregate operations such as putAll and clear, concurrent retrievals may reflect insertion or removal of only some entries. Similarly, Iterators and Enumerations return elements reflecting the state of the hash table at some point at or since the creation of the iterator/enumeration. They do not throw ConcurrentModificationException. However, iterators are designed to be used by only one thread at a time.

The allowed concurrency among update operations is guided by the optional concurrencyLevel constructor argument (default 16), which is used as a hint for internal sizing. The table is internally partitioned to try to permit the indicated number of concurrent updates without contention. Because placement in hash tables is essentially random, the actual concurrency will vary. Ideally, you should choose a value to accommodate as many threads as will ever concurrently modify the table. Using a significantly higher value than you need can waste space and time, and a significantly lower value can lead to thread contention. But overestimates and underestimates within an order of magnitude do not usually have much noticeable impact. A value of one is appropriate when it is known that only one thread will modify and all others will only read. Also, resizing this or any other kind of hash table is a relatively slow operation, so, when possible, it is a good idea to provide estimates of expected table sizes in constructors.

This class and its views and iterators implement all of the optional methods of the Map and Iterator interfaces.

Like Hashtable but unlike HashMap, this class does not allow null to be used as a key or value.

This class is a member of the Java Collections Framework.

Author:
Doug Lea, Jason T. Greene
See Also:
Serialized Form

Nested Class Summary
static class ConcurrentReferenceHashMap.Option
           
static class ConcurrentReferenceHashMap.ReferenceType
          An option specifying which Java reference type should be used to refer to a key and/or value.
 
Nested classes/interfaces inherited from class java.util.AbstractMap
AbstractMap.SimpleImmutableEntry<K,V>
 
Nested classes/interfaces inherited from interface java.util.Map
Map.Entry<K,V>
 
Constructor Summary
ConcurrentReferenceHashMap()
          Creates a new, empty map with a default initial capacity (16), reference types (weak keys, strong values), default load factor (0.75) and concurrencyLevel (16).
ConcurrentReferenceHashMap(int initialCapacity)
          Creates a new, empty map with the specified initial capacity, and with default reference types (weak keys, strong values), load factor (0.75) and concurrencyLevel (16).
ConcurrentReferenceHashMap(int initialCapacity, ConcurrentReferenceHashMap.ReferenceType keyType, ConcurrentReferenceHashMap.ReferenceType valueType)
          Creates a new, empty map with the specified initial capacity, reference types and with default load factor (0.75) and concurrencyLevel (16).
ConcurrentReferenceHashMap(int initialCapacity, float loadFactor)
          Creates a new, empty map with the specified initial capacity and load factor and with the default reference types (weak keys, strong values), and concurrencyLevel (16).
ConcurrentReferenceHashMap(int initialCapacity, float loadFactor, int concurrencyLevel)
          Creates a new, empty map with the specified initial capacity, load factor and concurrency level.
ConcurrentReferenceHashMap(int initialCapacity, float loadFactor, int concurrencyLevel, ConcurrentReferenceHashMap.ReferenceType keyType, ConcurrentReferenceHashMap.ReferenceType valueType, EnumSet<ConcurrentReferenceHashMap.Option> options)
          Creates a new, empty map with the specified initial capacity, reference types, load factor and concurrency level.
ConcurrentReferenceHashMap(Map<? extends K,? extends V> m)
          Creates a new map with the same mappings as the given map.
 
Method Summary
 void clear()
          Removes all of the mappings from this map.
 boolean contains(Object value)
          Legacy method testing if some key maps into the specified value in this table.
 boolean containsKey(Object key)
          Tests if the specified object is a key in this table.
 boolean containsValue(Object value)
          Returns true if this map maps one or more keys to the specified value.
 Enumeration<V> elements()
          Returns an enumeration of the values in this table.
 Set<Map.Entry<K,V>> entrySet()
          Returns a Set view of the mappings contained in this map.
 V get(Object key)
          Returns the value to which the specified key is mapped, or null if this map contains no mapping for the key.
 boolean isEmpty()
          Returns true if this map contains no key-value mappings.
 Enumeration<K> keys()
          Returns an enumeration of the keys in this table.
 Set<K> keySet()
          Returns a Set view of the keys contained in this map.
 void purgeStaleEntries()
          Removes any stale entries whose keys have been finalized.
 V put(K key, V value)
          Maps the specified key to the specified value in this table.
 void putAll(Map<? extends K,? extends V> m)
          Copies all of the mappings from the specified map to this one.
 V putIfAbsent(K key, V value)
          
 V remove(Object key)
          Removes the key (and its corresponding value) from this map.
 boolean remove(Object key, Object value)
          
 V replace(K key, V value)
          
 boolean replace(K key, V oldValue, V newValue)
          
 int size()
          Returns the number of key-value mappings in this map.
 Collection<V> values()
          Returns a Collection view of the values contained in this map.
 
Methods inherited from class java.util.AbstractMap
clone, equals, hashCode, toString
 
Methods inherited from class java.lang.Object
finalize, getClass, notify, notifyAll, wait, wait, wait
 
Methods inherited from interface java.util.Map
equals, hashCode
 

Constructor Detail

ConcurrentReferenceHashMap

public ConcurrentReferenceHashMap(int initialCapacity,
                                  float loadFactor,
                                  int concurrencyLevel,
                                  ConcurrentReferenceHashMap.ReferenceType keyType,
                                  ConcurrentReferenceHashMap.ReferenceType valueType,
                                  EnumSet<ConcurrentReferenceHashMap.Option> options)
Creates a new, empty map with the specified initial capacity, reference types, load factor and concurrency level. Behavioral changing options such as ConcurrentReferenceHashMap.Option.IDENTITY_COMPARISONS can also be specified.

Parameters:
initialCapacity - the initial capacity. The implementation performs internal sizing to accommodate this many elements.
loadFactor - the load factor threshold, used to control resizing. Resizing may be performed when the average number of elements per bin exceeds this threshold.
concurrencyLevel - the estimated number of concurrently updating threads. The implementation performs internal sizing to try to accommodate this many threads.
keyType - the reference type to use for keys
valueType - the reference type to use for values
options - the behavioral options
Throws:
IllegalArgumentException - if the initial capacity is negative or the load factor or concurrencyLevel are nonpositive.

ConcurrentReferenceHashMap

public ConcurrentReferenceHashMap(int initialCapacity,
                                  float loadFactor,
                                  int concurrencyLevel)
Creates a new, empty map with the specified initial capacity, load factor and concurrency level.

Parameters:
initialCapacity - the initial capacity. The implementation performs internal sizing to accommodate this many elements.
loadFactor - the load factor threshold, used to control resizing. Resizing may be performed when the average number of elements per bin exceeds this threshold.
concurrencyLevel - the estimated number of concurrently updating threads. The implementation performs internal sizing to try to accommodate this many threads.
Throws:
IllegalArgumentException - if the initial capacity is negative or the load factor or concurrencyLevel are nonpositive.

ConcurrentReferenceHashMap

public ConcurrentReferenceHashMap(int initialCapacity,
                                  float loadFactor)
Creates a new, empty map with the specified initial capacity and load factor and with the default reference types (weak keys, strong values), and concurrencyLevel (16).

Parameters:
initialCapacity - The implementation performs internal sizing to accommodate this many elements.
loadFactor - the load factor threshold, used to control resizing. Resizing may be performed when the average number of elements per bin exceeds this threshold.
Throws:
IllegalArgumentException - if the initial capacity of elements is negative or the load factor is nonpositive
Since:
1.6

ConcurrentReferenceHashMap

public ConcurrentReferenceHashMap(int initialCapacity,
                                  ConcurrentReferenceHashMap.ReferenceType keyType,
                                  ConcurrentReferenceHashMap.ReferenceType valueType)
Creates a new, empty map with the specified initial capacity, reference types and with default load factor (0.75) and concurrencyLevel (16).

Parameters:
initialCapacity - the initial capacity. The implementation performs internal sizing to accommodate this many elements.
keyType - the reference type to use for keys
valueType - the reference type to use for values
Throws:
IllegalArgumentException - if the initial capacity of elements is negative.

ConcurrentReferenceHashMap

public ConcurrentReferenceHashMap(int initialCapacity)
Creates a new, empty map with the specified initial capacity, and with default reference types (weak keys, strong values), load factor (0.75) and concurrencyLevel (16).

Parameters:
initialCapacity - the initial capacity. The implementation performs internal sizing to accommodate this many elements.
Throws:
IllegalArgumentException - if the initial capacity of elements is negative.

ConcurrentReferenceHashMap

public ConcurrentReferenceHashMap()
Creates a new, empty map with a default initial capacity (16), reference types (weak keys, strong values), default load factor (0.75) and concurrencyLevel (16).


ConcurrentReferenceHashMap

public ConcurrentReferenceHashMap(Map<? extends K,? extends V> m)
Creates a new map with the same mappings as the given map. The map is created with a capacity of 1.5 times the number of mappings in the given map or 16 (whichever is greater), and a default load factor (0.75) and concurrencyLevel (16).

Parameters:
m - the map
Method Detail

isEmpty

public boolean isEmpty()
Returns true if this map contains no key-value mappings.

Specified by:
isEmpty in interface Map<K,V>
Overrides:
isEmpty in class AbstractMap<K,V>
Returns:
true if this map contains no key-value mappings

size

public int size()
Returns the number of key-value mappings in this map. If the map contains more than Integer.MAX_VALUE elements, returns Integer.MAX_VALUE.

Specified by:
size in interface Map<K,V>
Overrides:
size in class AbstractMap<K,V>
Returns:
the number of key-value mappings in this map

get

public V get(Object key)
Returns the value to which the specified key is mapped, or null if this map contains no mapping for the key.

More formally, if this map contains a mapping from a key k to a value v such that key.equals(k), then this method returns v; otherwise it returns null. (There can be at most one such mapping.)

Specified by:
get in interface Map<K,V>
Overrides:
get in class AbstractMap<K,V>
Throws:
NullPointerException - if the specified key is null

containsKey

public boolean containsKey(Object key)
Tests if the specified object is a key in this table.

Specified by:
containsKey in interface Map<K,V>
Overrides:
containsKey in class AbstractMap<K,V>
Parameters:
key - possible key
Returns:
true if and only if the specified object is a key in this table, as determined by the equals method; false otherwise.
Throws:
NullPointerException - if the specified key is null

containsValue

public boolean containsValue(Object value)
Returns true if this map maps one or more keys to the specified value. Note: This method requires a full internal traversal of the hash table, and so is much slower than method containsKey.

Specified by:
containsValue in interface Map<K,V>
Overrides:
containsValue in class AbstractMap<K,V>
Parameters:
value - value whose presence in this map is to be tested
Returns:
true if this map maps one or more keys to the specified value
Throws:
NullPointerException - if the specified value is null

contains

public boolean contains(Object value)
Legacy method testing if some key maps into the specified value in this table. This method is identical in functionality to containsValue(java.lang.Object), and exists solely to ensure full compatibility with class Hashtable, which supported this method prior to introduction of the Java Collections framework.

Parameters:
value - a value to search for
Returns:
true if and only if some key maps to the value argument in this table as determined by the equals method; false otherwise
Throws:
NullPointerException - if the specified value is null

put

public V put(K key,
             V value)
Maps the specified key to the specified value in this table. Neither the key nor the value can be null.

The value can be retrieved by calling the get method with a key that is equal to the original key.

Specified by:
put in interface Map<K,V>
Overrides:
put in class AbstractMap<K,V>
Parameters:
key - key with which the specified value is to be associated
value - value to be associated with the specified key
Returns:
the previous value associated with key, or null if there was no mapping for key
Throws:
NullPointerException - if the specified key or value is null

putIfAbsent

public V putIfAbsent(K key,
                     V value)

Specified by:
putIfAbsent in interface ConcurrentMap<K,V>
Returns:
the previous value associated with the specified key, or null if there was no mapping for the key
Throws:
NullPointerException - if the specified key or value is null

putAll

public void putAll(Map<? extends K,? extends V> m)
Copies all of the mappings from the specified map to this one. These mappings replace any mappings that this map had for any of the keys currently in the specified map.

Specified by:
putAll in interface Map<K,V>
Overrides:
putAll in class AbstractMap<K,V>
Parameters:
m - mappings to be stored in this map

remove

public V remove(Object key)
Removes the key (and its corresponding value) from this map. This method does nothing if the key is not in the map.

Specified by:
remove in interface Map<K,V>
Overrides:
remove in class AbstractMap<K,V>
Parameters:
key - the key that needs to be removed
Returns:
the previous value associated with key, or null if there was no mapping for key
Throws:
NullPointerException - if the specified key is null

remove

public boolean remove(Object key,
                      Object value)

Specified by:
remove in interface ConcurrentMap<K,V>
Throws:
NullPointerException - if the specified key is null

replace

public boolean replace(K key,
                       V oldValue,
                       V newValue)

Specified by:
replace in interface ConcurrentMap<K,V>
Throws:
NullPointerException - if any of the arguments are null

replace

public V replace(K key,
                 V value)

Specified by:
replace in interface ConcurrentMap<K,V>
Returns:
the previous value associated with the specified key, or null if there was no mapping for the key
Throws:
NullPointerException - if the specified key or value is null

clear

public void clear()
Removes all of the mappings from this map.

Specified by:
clear in interface Map<K,V>
Overrides:
clear in class AbstractMap<K,V>

purgeStaleEntries

public void purgeStaleEntries()
Removes any stale entries whose keys have been finalized. Use of this method is normally not necessary since stale entries are automatically removed lazily, when blocking operations are required. However, there are some cases where this operation should be performed eagerly, such as cleaning up old references to a ClassLoader in a multi-classloader environment. Note: this method will acquire locks, one at a time, across all segments of this table, so if it is to be used, it should be used sparingly.


keySet

public Set<K> keySet()
Returns a Set view of the keys contained in this map. The set is backed by the map, so changes to the map are reflected in the set, and vice-versa. The set supports element removal, which removes the corresponding mapping from this map, via the Iterator.remove, Set.remove, removeAll, retainAll, and clear operations. It does not support the add or addAll operations.

The view's iterator is a "weakly consistent" iterator that will never throw ConcurrentModificationException, and guarantees to traverse elements as they existed upon construction of the iterator, and may (but is not guaranteed to) reflect any modifications subsequent to construction.

Specified by:
keySet in interface Map<K,V>
Overrides:
keySet in class AbstractMap<K,V>

values

public Collection<V> values()
Returns a Collection view of the values contained in this map. The collection is backed by the map, so changes to the map are reflected in the collection, and vice-versa. The collection supports element removal, which removes the corresponding mapping from this map, via the Iterator.remove, Collection.remove, removeAll, retainAll, and clear operations. It does not support the add or addAll operations.

The view's iterator is a "weakly consistent" iterator that will never throw ConcurrentModificationException, and guarantees to traverse elements as they existed upon construction of the iterator, and may (but is not guaranteed to) reflect any modifications subsequent to construction.

Specified by:
values in interface Map<K,V>
Overrides:
values in class AbstractMap<K,V>

entrySet

public Set<Map.Entry<K,V>> entrySet()
Returns a Set view of the mappings contained in this map. The set is backed by the map, so changes to the map are reflected in the set, and vice-versa. The set supports element removal, which removes the corresponding mapping from the map, via the Iterator.remove, Set.remove, removeAll, retainAll, and clear operations. It does not support the add or addAll operations.

The view's iterator is a "weakly consistent" iterator that will never throw ConcurrentModificationException, and guarantees to traverse elements as they existed upon construction of the iterator, and may (but is not guaranteed to) reflect any modifications subsequent to construction.

Specified by:
entrySet in interface Map<K,V>
Specified by:
entrySet in class AbstractMap<K,V>

keys

public Enumeration<K> keys()
Returns an enumeration of the keys in this table.

Returns:
an enumeration of the keys in this table
See Also:
keySet()

elements

public Enumeration<V> elements()
Returns an enumeration of the values in this table.

Returns:
an enumeration of the values in this table
See Also:
values()


Copyright © 2001-2010 Red Hat, Inc. All Rights Reserved.