ServerLocator (HornetQ Core Client 2.4.0.Final API)

All Superinterfaces:

AutoCloseable
```
public interface ServerLocator
extends AutoCloseable
```
The serverLocator locates a server, but beyond that it locates a server based on a list.
If you are using straight TCP on the configuration, and if you configure your serverLocator to be HA, the locator will always get an updated list of members to the server, the server will send the updated list to the client.
If you use UDP or JGroups (exclusively JGropus or UDP), the initial discovery is done by the grouping finder, after the initial connection is made the server will always send updates to the client. But the listeners will listen for updates on grouping.

Author:

Tim Fox

Method Summary

Methods
Modifier and Type	Method and Description
`void`	`addClusterTopologyListener(ClusterTopologyListener listener)`
`void`	`addIncomingInterceptor(Interceptor interceptor)` Adds an interceptor which will be executed after packets are received from the server.
`void`	`addInterceptor(Interceptor interceptor)` Deprecated. As of HornetQ 2.3.0.Final, replaced by `addIncomingInterceptor(Interceptor)` and `addOutgoingInterceptor(Interceptor)`
`void`	`addOutgoingInterceptor(Interceptor interceptor)` Adds an interceptor which will be executed before packets are sent to the server.
`void`	`close()` Closes this factory and release all its resources
`ClientSessionFactory`	`createSessionFactory()` Creates a ClientSessionFactory using whatever load balancing policy is in force
`ClientSessionFactory`	`createSessionFactory(String nodeID)` Creates a `ClientSessionFactory` to a specific server.
`ClientSessionFactory`	`createSessionFactory(TransportConfiguration transportConfiguration)` Creates a `ClientSessionFactory` to a specific server.
`ClientSessionFactory`	`createSessionFactory(TransportConfiguration transportConfiguration, int reconnectAttempts, boolean failoverOnInitialConnection)` Creates a `ClientSessionFactory` to a specific server.
`void`	`disableFinalizeCheck()` This method will disable any checks when a GarbageCollection happens leaving connections open.
`int`	`getAckBatchSize()` Returns the acknowledgments batch size.
`long`	`getCallFailoverTimeout()` Returns the blocking calls failover timeout when the client is awaiting failover, this is over and above the normal call timeout.
`long`	`getCallTimeout()` Returns the blocking calls timeout.
`long`	`getClientFailureCheckPeriod()` Returns the period used to check if a client has failed to receive pings from the server.
`int`	`getConfirmationWindowSize()` Returns the size for the confirmation window of clients using this factory.
`String`	`getConnectionLoadBalancingPolicyClassName()` Returns the class name of the connection load balancing policy.
`long`	`getConnectionTTL()` Returns the connection time-to-live.
`int`	`getConsumerMaxRate()` Returns the maximum rate of message consumption for consumers created through this factory.
`int`	`getConsumerWindowSize()` Returns the window size for flow control of the consumers created through this factory.
`DiscoveryGroupConfiguration`	`getDiscoveryGroupConfiguration()` The discovery group configuration
`String`	`getGroupID()` Returns the group ID that will be eventually set on each message for the property `Message.HDR_GROUP_ID`.
`int`	`getInitialConnectAttempts()`
`int`	`getInitialMessagePacketSize()` Returns the initial size of messages created through this factory.
`long`	`getMaxRetryInterval()` Returns the maximum retry interval (in the case a retry interval multiplier has been specified).
`int`	`getMinLargeMessageSize()` Returns the large message size threshold.
`int`	`getProducerMaxRate()` Returns the maximum rate of message production for producers created through this factory.
`int`	`getProducerWindowSize()` Returns the window size for flow control of the producers created through this factory.
`int`	`getReconnectAttempts()` Returns the maximum number of attempts to retry connection in case of failure.
`long`	`getRetryInterval()` Returns the time to retry connections created by this factory after failure.
`double`	`getRetryIntervalMultiplier()` Returns the multiplier to apply to successive retry intervals.
`int`	`getScheduledThreadPoolMaxSize()` Returns the maximum size of the scheduled thread pool.
`TransportConfiguration[]`	`getStaticTransportConfigurations()` Returns an array of TransportConfigurations representing the static list of live servers used when creating this object
`int`	`getThreadPoolMaxSize()` Returns the maximum size of the thread pool.
`org.hornetq.core.client.impl.Topology`	`getTopology()` Exposes the Topology used by this ServerLocator.
`boolean`	`isAutoGroup()` Returns whether producers created through this factory will automatically assign a group ID to the messages they sent.
`boolean`	`isBlockOnAcknowledge()` Returns whether consumers created through this factory will block while sending message acknowledgments or do it asynchronously.
`boolean`	`isBlockOnDurableSend()` Returns whether producers created through this factory will block while sending durable messages or do it asynchronously.
`boolean`	`isBlockOnNonDurableSend()` Returns whether producers created through this factory will block while sending non-durable messages or do it asynchronously.
`boolean`	`isCacheLargeMessagesClient()` When `true`, consumers created through this factory will create temporary files to cache large messages.
`boolean`	`isClosed()` Returns true if close was already called
`boolean`	`isCompressLargeMessage()` Whether to compress large messages.
`boolean`	`isFailoverOnInitialConnection()` Returns true if the client will automatically attempt to connect to the backup server if the initial connection to the live server fails Default value is `HornetQClient.DEFAULT_FAILOVER_ON_INITIAL_CONNECTION`.
`boolean`	`isHA()` Whether this server receives topology notifications from the cluster as servers join or leave the cluster.
`boolean`	`isPreAcknowledge()` Returns whether messages will pre-acknowledged on the server before they are sent to the consumers or not.
`boolean`	`isUseGlobalPools()` Returns whether this factory will use global thread pools (shared among all the factories in the same JVM) or its own pools.
`void`	`removeClusterTopologyListener(ClusterTopologyListener listener)`
`boolean`	`removeIncomingInterceptor(Interceptor interceptor)` Removes an incoming interceptor.
`boolean`	`removeInterceptor(Interceptor interceptor)` Deprecated. As of HornetQ 2.3.0.Final, replaced by `removeIncomingInterceptor(Interceptor)` and `removeOutgoingInterceptor(Interceptor)`
`boolean`	`removeOutgoingInterceptor(Interceptor interceptor)` Removes an outgoing interceptor.
`void`	`setAckBatchSize(int ackBatchSize)` Sets the acknowledgments batch size.
`void`	`setAutoGroup(boolean autoGroup)` Sets whether producers created through this factory will automatically assign a group ID to the messages they sent.
`void`	`setBlockOnAcknowledge(boolean blockOnAcknowledge)` Sets whether consumers created through this factory will block while sending message acknowledgments or do it asynchronously.
`void`	`setBlockOnDurableSend(boolean blockOnDurableSend)` Sets whether producers created through this factory will block while sending durable messages or do it asynchronously.
`void`	`setBlockOnNonDurableSend(boolean blockOnNonDurableSend)` Sets whether producers created through this factory will block while sending non-durable messages or do it asynchronously.
`void`	`setCacheLargeMessagesClient(boolean cached)` Sets whether large messages received by consumers created through this factory will be cached in temporary files or not.
`void`	`setCallFailoverTimeout(long callFailoverTimeout)` Sets the blocking call failover timeout.
`void`	`setCallTimeout(long callTimeout)` Sets the blocking call timeout.
`void`	`setClientFailureCheckPeriod(long clientFailureCheckPeriod)` Sets the period (in milliseconds) used to check if a client has failed to receive pings from the server.
`void`	`setCompressLargeMessage(boolean compressLargeMessages)` Sets whether to compress or not large messages.
`void`	`setConfirmationWindowSize(int confirmationWindowSize)` Sets the size for the confirmation window buffer of clients using this factory.
`void`	`setConnectionLoadBalancingPolicyClassName(String loadBalancingPolicyClassName)` Sets the class name of the connection load balancing policy.
`void`	`setConnectionTTL(long connectionTTL)` Sets this factory's connections time-to-live.
`void`	`setConsumerMaxRate(int consumerMaxRate)` Sets the maximum rate of message consumption for consumers created through this factory.
`void`	`setConsumerWindowSize(int consumerWindowSize)` Sets the window size for flow control of the consumers created through this factory.
`void`	`setFailoverOnInitialConnection(boolean failover)` Sets the value for FailoverOnInitialReconnection
`void`	`setGroupID(String groupID)` Sets the group ID that will be set on each message sent through this factory.
`void`	`setInitialConnectAttempts(int reconnectAttempts)` Sets the maximum number of attempts to establish an initial connection.
`void`	`setInitialMessagePacketSize(int size)` Sets the initial size of messages created through this factory.
`void`	`setMaxRetryInterval(long maxRetryInterval)` Sets the maximum retry interval.
`void`	`setMinLargeMessageSize(int minLargeMessageSize)` Sets the large message size threshold.
`void`	`setPreAcknowledge(boolean preAcknowledge)` Sets to `true` to pre-acknowledge consumed messages on the server before they are sent to consumers, else set to `false` to let clients acknowledge the message they consume.
`void`	`setProducerMaxRate(int producerMaxRate)` Sets the maximum rate of message production for producers created through this factory.
`void`	`setProducerWindowSize(int producerWindowSize)` Returns the window size for flow control of the producers created through this factory.
`void`	`setReconnectAttempts(int reconnectAttempts)` Sets the maximum number of attempts to retry connection in case of failure.
`void`	`setRetryInterval(long retryInterval)` Sets the time to retry connections created by this factory after failure.
`void`	`setRetryIntervalMultiplier(double retryIntervalMultiplier)` Sets the multiplier to apply to successive retry intervals.
`void`	`setScheduledThreadPoolMaxSize(int scheduledThreadPoolMaxSize)` Sets the maximum size of the scheduled thread pool.
`void`	`setThreadPoolMaxSize(int threadPoolMaxSize)` Sets the maximum size of the thread pool.
`void`	`setUseGlobalPools(boolean useGlobalPools)` Sets whether this factory will use global thread pools (shared among all the factories in the same JVM) or its own pools.

- Method Detail
  - isClosed
```
boolean isClosed()
```
    Returns true if close was already called
    
    Returns:
    true if closed, false otherwise.
  - disableFinalizeCheck
```
void disableFinalizeCheck()
```
    This method will disable any checks when a GarbageCollection happens leaving connections open. The JMS Layer will make specific usage of this method, since the ConnectionFactory.finalize should release this. Warning: You may leave resources unattended if you call this method and don't take care of cleaning the resources yourself.
  - createSessionFactory
```
ClientSessionFactory createSessionFactory()
                                          throws Exception
```
    Creates a ClientSessionFactory using whatever load balancing policy is in force
    
    Returns:
    The ClientSessionFactory
    
    Throws:
    
    Exception
  - createSessionFactory
```
ClientSessionFactory createSessionFactory(String nodeID)
                                          throws Exception
```
    Creates a ClientSessionFactory to a specific server. The server must already be known about by this ServerLocator. This method allows the user to make a connection to a specific server bypassing any load balancing policy in force
    
    Parameters:
    nodeID -
    
    Returns:
    a ClientSessionFactory instance or null if the node is not present on the topology
    
    Throws:
    
    Exception - if a failure happened in creating the ClientSessionFactory or the ServerLocator does not know about the passed in transportConfiguration
  - createSessionFactory
```
ClientSessionFactory createSessionFactory(TransportConfiguration transportConfiguration)
                                          throws Exception
```
    Creates a ClientSessionFactory to a specific server. The server must already be known about by this ServerLocator. This method allows the user to make a connection to a specific server bypassing any load balancing policy in force
    
    Parameters:
    transportConfiguration -
    
    Returns:
    a ClientSessionFactory instance
    
    Throws:
    
    Exception - if a failure happened in creating the ClientSessionFactory or the ServerLocator does not know about the passed in transportConfiguration
  - createSessionFactory
```
ClientSessionFactory createSessionFactory(TransportConfiguration transportConfiguration,
                                        int reconnectAttempts,
                                        boolean failoverOnInitialConnection)
                                          throws Exception
```
    Creates a ClientSessionFactory to a specific server. The server must already be known about by this ServerLocator. This method allows the user to make a connection to a specific server bypassing any load balancing policy in force
    
    Parameters:
    transportConfiguration -
    reconnectAttempts - number of attempts of reconnection to perform
    failoverOnInitialConnection -
    
    Returns:
    a ClientSessionFactory instance
    
    Throws:
    
    Exception - if a failure happened in creating the ClientSessionFactory or the ServerLocator does not know about the passed in transportConfiguration
  - getClientFailureCheckPeriod
```
long getClientFailureCheckPeriod()
```
    Returns the period used to check if a client has failed to receive pings from the server.
    Period is in milliseconds, default value is HornetQClient.DEFAULT_CLIENT_FAILURE_CHECK_PERIOD.
    
    Returns:
    the period used to check if a client has failed to receive pings from the server
  - setClientFailureCheckPeriod
```
void setClientFailureCheckPeriod(long clientFailureCheckPeriod)
```
    Sets the period (in milliseconds) used to check if a client has failed to receive pings from the server.
    Value must be -1 (to disable) or greater than 0.
    
    Parameters:
    clientFailureCheckPeriod - the period to check failure
  - isCacheLargeMessagesClient
```
boolean isCacheLargeMessagesClient()
```
    When true, consumers created through this factory will create temporary files to cache large messages.
    There is 1 temporary file created for each large message.
    Default value is HornetQClient.DEFAULT_CACHE_LARGE_MESSAGE_CLIENT.
    
    Returns:
    true if consumers created through this factory will cache large messages in temporary files, false else
  - setCacheLargeMessagesClient
```
void setCacheLargeMessagesClient(boolean cached)
```
    Sets whether large messages received by consumers created through this factory will be cached in temporary files or not.
    
    Parameters:
    cached - true to cache large messages in temporary files, false else
  - getConnectionTTL
```
long getConnectionTTL()
```
    Returns the connection time-to-live.
    This TTL determines how long the server will keep a connection alive in the absence of any data arriving from the client. Value is in milliseconds, default value is HornetQClient.DEFAULT_CONNECTION_TTL.
    
    Returns:
    the connection time-to-live in milliseconds
  - setConnectionTTL
```
void setConnectionTTL(long connectionTTL)
```
    Sets this factory's connections time-to-live. Value must be -1 (to disable) or greater or equals to 0.
    
    Parameters:
    connectionTTL - period in milliseconds
  - getCallTimeout
```
long getCallTimeout()
```
    Returns the blocking calls timeout.
    If client's blocking calls to the server take more than this timeout, the call will throw a HornetQException with the code HornetQExceptionType.CONNECTION_TIMEDOUT. Value is in milliseconds, default value is HornetQClient.DEFAULT_CALL_TIMEOUT.
    
    Returns:
    the blocking calls timeout
  - setCallTimeout
```
void setCallTimeout(long callTimeout)
```
    Sets the blocking call timeout.
    Value must be greater or equals to 0
    
    Parameters:
    callTimeout - blocking call timeout in milliseconds
  - getCallFailoverTimeout
```
long getCallFailoverTimeout()
```
    Returns the blocking calls failover timeout when the client is awaiting failover, this is over and above the normal call timeout.
    If client is in the process of failing over when a blocking call is called then the client will wait this long before actually trying the send.
    
    Returns:
    the blocking calls failover timeout
  - setCallFailoverTimeout
```
void setCallFailoverTimeout(long callFailoverTimeout)
```
    Sets the blocking call failover timeout.
    When the client is awaiting failover, this is over and above the normal call timeout.
    Value must be greater or equals to -1, -1 means forever
    
    Parameters:
    callFailoverTimeout - blocking call timeout in milliseconds
  - getMinLargeMessageSize
```
int getMinLargeMessageSize()
```
    Returns the large message size threshold.
    Messages whose size is if greater than this value will be handled as large messages. Value is in bytes, default value is HornetQClient.DEFAULT_MIN_LARGE_MESSAGE_SIZE.
    
    Returns:
    the message size threshold to treat messages as large messages.
  - setMinLargeMessageSize
```
void setMinLargeMessageSize(int minLargeMessageSize)
```
    Sets the large message size threshold. Value must be greater than 0.
    
    Parameters:
    minLargeMessageSize - large message size threshold in bytes
  - getConsumerWindowSize
```
int getConsumerWindowSize()
```
    Returns the window size for flow control of the consumers created through this factory. Value is in bytes, default value is HornetQClient.DEFAULT_CONSUMER_WINDOW_SIZE.
    
    Returns:
    the window size used for consumer flow control
  - setConsumerWindowSize
```
void setConsumerWindowSize(int consumerWindowSize)
```
    Sets the window size for flow control of the consumers created through this factory.
    Value must be -1 (to disable flow control), 0 (to not buffer any messages) or greater than 0 (to set the maximum size of the buffer)
    
    Parameters:
    consumerWindowSize - window size (in bytes) used for consumer flow control
  - getConsumerMaxRate
```
int getConsumerMaxRate()
```
    Returns the maximum rate of message consumption for consumers created through this factory. This value controls the rate at which a consumer can consume messages. A consumer will never consume messages at a rate faster than the rate specified. Value is -1 (to disable) or a positive integer corresponding to the maximum desired message consumption rate specified in units of messages per second. Default value is HornetQClient.DEFAULT_CONSUMER_MAX_RATE.
    
    Returns:
    the consumer max rate
  - setConsumerMaxRate
```
void setConsumerMaxRate(int consumerMaxRate)
```
    Sets the maximum rate of message consumption for consumers created through this factory. Value must -1 (to disable) or a positive integer corresponding to the maximum desired message consumption rate specified in units of messages per second.
    
    Parameters:
    consumerMaxRate - maximum rate of message consumption (in messages per seconds)
  - getConfirmationWindowSize
```
int getConfirmationWindowSize()
```
    Returns the size for the confirmation window of clients using this factory.
    Value is in bytes or -1 (to disable the window). Default value is HornetQClient.DEFAULT_CONFIRMATION_WINDOW_SIZE.
    
    Returns:
    the size for the confirmation window of clients using this factory
  - setConfirmationWindowSize
```
void setConfirmationWindowSize(int confirmationWindowSize)
```
    Sets the size for the confirmation window buffer of clients using this factory.
    Value must be -1 (to disable the window) or greater than 0.
    
    Parameters:
    confirmationWindowSize - size of the confirmation window (in bytes)
  - getProducerWindowSize
```
int getProducerWindowSize()
```
    Returns the window size for flow control of the producers created through this factory. Value must be -1 (to disable flow control) or greater than 0 to determine the maximum amount of bytes at any give time (to prevent overloading the connection). Default value is HornetQClient.DEFAULT_PRODUCER_WINDOW_SIZE.
    
    Returns:
    the window size for flow control of the producers created through this factory.
  - setProducerWindowSize
```
void setProducerWindowSize(int producerWindowSize)
```
    Returns the window size for flow control of the producers created through this factory. Value must be -1 (to disable flow control) or greater than 0.
    
    Parameters:
    producerWindowSize - window size (in bytest) for flow control of the producers created through this factory.
  - getProducerMaxRate
```
int getProducerMaxRate()
```
    Returns the maximum rate of message production for producers created through this factory. This value controls the rate at which a producer can produce messages. A producer will never produce messages at a rate faster than the rate specified. Value is -1 (to disable) or a positive integer corresponding to the maximum desired message production rate specified in units of messages per second. Default value is HornetQClient.DEFAULT_PRODUCER_MAX_RATE.
    
    Returns:
    maximum rate of message production (in messages per seconds)
  - setProducerMaxRate
```
void setProducerMaxRate(int producerMaxRate)
```
    Sets the maximum rate of message production for producers created through this factory. Value must -1 (to disable) or a positive integer corresponding to the maximum desired message production rate specified in units of messages per second.
    
    Parameters:
    producerMaxRate - maximum rate of message production (in messages per seconds)
  - isBlockOnAcknowledge
```
boolean isBlockOnAcknowledge()
```
    Returns whether consumers created through this factory will block while sending message acknowledgments or do it asynchronously. Default value is HornetQClient.DEFAULT_BLOCK_ON_ACKNOWLEDGE.
    
    Returns:
    whether consumers will block while sending message acknowledgments or do it asynchronously
  - setBlockOnAcknowledge
```
void setBlockOnAcknowledge(boolean blockOnAcknowledge)
```
    Sets whether consumers created through this factory will block while sending message acknowledgments or do it asynchronously.
    
    Parameters:
    blockOnAcknowledge - true to block when sending message acknowledgments or false to send them asynchronously
  - isBlockOnDurableSend
```
boolean isBlockOnDurableSend()
```
    Returns whether producers created through this factory will block while sending durable messages or do it asynchronously.
    If the session is configured to send durable message asynchronously, the client can set a SendAcknowledgementHandler on the ClientSession to be notified once the message has been handled by the server. Default value is HornetQClient.DEFAULT_BLOCK_ON_DURABLE_SEND.
    
    Returns:
    whether producers will block while sending persistent messages or do it asynchronously
  - setBlockOnDurableSend
```
void setBlockOnDurableSend(boolean blockOnDurableSend)
```
    Sets whether producers created through this factory will block while sending durable messages or do it asynchronously.
    
    Parameters:
    blockOnDurableSend - true to block when sending durable messages or false to send them asynchronously
  - isBlockOnNonDurableSend
```
boolean isBlockOnNonDurableSend()
```
    Returns whether producers created through this factory will block while sending non-durable messages or do it asynchronously.
    If the session is configured to send non-durable message asynchronously, the client can set a SendAcknowledgementHandler on the ClientSession to be notified once the message has been handled by the server. Default value is HornetQClient.DEFAULT_BLOCK_ON_NON_DURABLE_SEND.
    
    Returns:
    whether producers will block while sending non-durable messages or do it asynchronously
  - setBlockOnNonDurableSend
```
void setBlockOnNonDurableSend(boolean blockOnNonDurableSend)
```
    Sets whether producers created through this factory will block while sending non-durable messages or do it asynchronously.
    
    Parameters:
    blockOnNonDurableSend - true to block when sending non-durable messages or false to send them asynchronously
  - isAutoGroup
```
boolean isAutoGroup()
```
    Returns whether producers created through this factory will automatically assign a group ID to the messages they sent. if true, a random unique group ID is created and set on each message for the property Message.HDR_GROUP_ID. Default value is HornetQClient.DEFAULT_AUTO_GROUP.
    
    Returns:
    whether producers will automatically assign a group ID to their messages
  - setAutoGroup
```
void setAutoGroup(boolean autoGroup)
```
    Sets whether producers created through this factory will automatically assign a group ID to the messages they sent.
    
    Parameters:
    autoGroup - true to automatically assign a group ID to each messages sent through this factory, false else
  - getGroupID
```
String getGroupID()
```
    Returns the group ID that will be eventually set on each message for the property Message.HDR_GROUP_ID. Default value is is null and no group ID will be set on the messages.
    
    Returns:
    the group ID that will be eventually set on each message
  - setGroupID
```
void setGroupID(String groupID)
```
    Sets the group ID that will be set on each message sent through this factory.
    
    Parameters:
    groupID - the group ID to use
  - isPreAcknowledge
```
boolean isPreAcknowledge()
```
    Returns whether messages will pre-acknowledged on the server before they are sent to the consumers or not. Default value is HornetQClient.DEFAULT_PRE_ACKNOWLEDGE
  - setPreAcknowledge
```
void setPreAcknowledge(boolean preAcknowledge)
```
    Sets to true to pre-acknowledge consumed messages on the server before they are sent to consumers, else set to false to let clients acknowledge the message they consume.
    
    Parameters:
    preAcknowledge - true to enable pre-acknowledgment, false else
  - getAckBatchSize
```
int getAckBatchSize()
```
    Returns the acknowledgments batch size. Default value is HornetQClient.DEFAULT_ACK_BATCH_SIZE.
    
    Returns:
    the acknowledgments batch size
  - setAckBatchSize
```
void setAckBatchSize(int ackBatchSize)
```
    Sets the acknowledgments batch size. Value must be equal or greater than 0.
    
    Parameters:
    ackBatchSize - acknowledgments batch size
  - getStaticTransportConfigurations
```
TransportConfiguration[] getStaticTransportConfigurations()
```
    Returns an array of TransportConfigurations representing the static list of live servers used when creating this object
    
    Returns:
    array with all static TransportConfigurations
  - getDiscoveryGroupConfiguration
```
DiscoveryGroupConfiguration getDiscoveryGroupConfiguration()
```
    The discovery group configuration
  - isUseGlobalPools
```
boolean isUseGlobalPools()
```
    Returns whether this factory will use global thread pools (shared among all the factories in the same JVM) or its own pools. Default value is HornetQClient.DEFAULT_USE_GLOBAL_POOLS.
    
    Returns:
    true if this factory uses global thread pools, false else
  - setUseGlobalPools
```
void setUseGlobalPools(boolean useGlobalPools)
```
    Sets whether this factory will use global thread pools (shared among all the factories in the same JVM) or its own pools.
    
    Parameters:
    useGlobalPools - true to let this factory uses global thread pools, false else
  - getScheduledThreadPoolMaxSize
```
int getScheduledThreadPoolMaxSize()
```
    Returns the maximum size of the scheduled thread pool. Default value is HornetQClient.DEFAULT_SCHEDULED_THREAD_POOL_MAX_SIZE.
    
    Returns:
    the maximum size of the scheduled thread pool.
  - setScheduledThreadPoolMaxSize
```
void setScheduledThreadPoolMaxSize(int scheduledThreadPoolMaxSize)
```
    Sets the maximum size of the scheduled thread pool. This setting is relevant only if this factory does not use global pools. Value must be greater than 0.
    
    Parameters:
    scheduledThreadPoolMaxSize - maximum size of the scheduled thread pool.
  - getThreadPoolMaxSize
```
int getThreadPoolMaxSize()
```
    Returns the maximum size of the thread pool. Default value is HornetQClient.DEFAULT_THREAD_POOL_MAX_SIZE.
    
    Returns:
    the maximum size of the thread pool.
  - setThreadPoolMaxSize
```
void setThreadPoolMaxSize(int threadPoolMaxSize)
```
    Sets the maximum size of the thread pool. This setting is relevant only if this factory does not use global pools. Value must be -1 (for unlimited thread pool) or greater than 0.
    
    Parameters:
    threadPoolMaxSize - maximum size of the thread pool.
  - getRetryInterval
```
long getRetryInterval()
```
    Returns the time to retry connections created by this factory after failure. Value is in milliseconds, default is HornetQClient.DEFAULT_RETRY_INTERVAL.
    
    Returns:
    the time to retry connections created by this factory after failure
  - setRetryInterval
```
void setRetryInterval(long retryInterval)
```
    Sets the time to retry connections created by this factory after failure. Value must be greater than 0.
    
    Parameters:
    retryInterval - time (in milliseconds) to retry connections created by this factory after failure
  - getRetryIntervalMultiplier
```
double getRetryIntervalMultiplier()
```
    Returns the multiplier to apply to successive retry intervals. Default value is HornetQClient.DEFAULT_RETRY_INTERVAL_MULTIPLIER.
    
    Returns:
    the multiplier to apply to successive retry intervals
  - setRetryIntervalMultiplier
```
void setRetryIntervalMultiplier(double retryIntervalMultiplier)
```
    Sets the multiplier to apply to successive retry intervals. Value must be positive.
    
    Parameters:
    retryIntervalMultiplier - multiplier to apply to successive retry intervals
  - getMaxRetryInterval
```
long getMaxRetryInterval()
```
    Returns the maximum retry interval (in the case a retry interval multiplier has been specified). Value is in milliseconds, default value is HornetQClient.DEFAULT_MAX_RETRY_INTERVAL.
    
    Returns:
    the maximum retry interval
  - setMaxRetryInterval
```
void setMaxRetryInterval(long maxRetryInterval)
```
    Sets the maximum retry interval.
    Value must be greater than 0.
    
    Parameters:
    maxRetryInterval - maximum retry interval to apply in the case a retry interval multiplier has been specified
  - getReconnectAttempts
```
int getReconnectAttempts()
```
    Returns the maximum number of attempts to retry connection in case of failure. Default value is HornetQClient.DEFAULT_RECONNECT_ATTEMPTS.
    
    Returns:
    the maximum number of attempts to retry connection in case of failure.
  - setReconnectAttempts
```
void setReconnectAttempts(int reconnectAttempts)
```
    Sets the maximum number of attempts to retry connection in case of failure. Value must be -1 (to retry infinitely), 0 (to never retry connection) or greater than 0.
    
    Parameters:
    reconnectAttempts - maximum number of attempts to retry connection in case of failure
  - setInitialConnectAttempts
```
void setInitialConnectAttempts(int reconnectAttempts)
```
    Sets the maximum number of attempts to establish an initial connection.
    Value must be -1 (to retry infinitely), 0 (to never retry connection) or greater than 0.
    
    Parameters:
    reconnectAttempts - maximum number of attempts for the initial connection
  - getInitialConnectAttempts
```
int getInitialConnectAttempts()
```
    Returns:
    the number of attempts to be made for first initial connection.
  - isFailoverOnInitialConnection
```
boolean isFailoverOnInitialConnection()
```
    Returns true if the client will automatically attempt to connect to the backup server if the initial connection to the live server fails Default value is HornetQClient.DEFAULT_FAILOVER_ON_INITIAL_CONNECTION.
  - setFailoverOnInitialConnection
```
void setFailoverOnInitialConnection(boolean failover)
```
    Sets the value for FailoverOnInitialReconnection
    
    Parameters:
    failover -
  - getConnectionLoadBalancingPolicyClassName
```
String getConnectionLoadBalancingPolicyClassName()
```
    Returns the class name of the connection load balancing policy. Default value is "org.hornetq.api.core.client.loadbalance.RoundRobinConnectionLoadBalancingPolicy".
    
    Returns:
    the class name of the connection load balancing policy
  - setConnectionLoadBalancingPolicyClassName
```
void setConnectionLoadBalancingPolicyClassName(String loadBalancingPolicyClassName)
```
    Sets the class name of the connection load balancing policy. Value must be the name of a class implementing ConnectionLoadBalancingPolicy.
    
    Parameters:
    loadBalancingPolicyClassName - class name of the connection load balancing policy
  - getInitialMessagePacketSize
```
int getInitialMessagePacketSize()
```
    Returns the initial size of messages created through this factory. Value is in bytes, default value is HornetQClient.DEFAULT_INITIAL_MESSAGE_PACKET_SIZE.
    
    Returns:
    the initial size of messages created through this factory
  - setInitialMessagePacketSize
```
void setInitialMessagePacketSize(int size)
```
    Sets the initial size of messages created through this factory. Value must be greater than 0.
    
    Parameters:
    size - initial size of messages created through this factory.
  - addInterceptor
```
@Deprecated
void addInterceptor(Interceptor interceptor)
```
    Deprecated. As of HornetQ 2.3.0.Final, replaced by addIncomingInterceptor(Interceptor) and addOutgoingInterceptor(Interceptor)
    
    Adds an interceptor which will be executed after packets are received from the server. Invoking this method is the same as invoking addIncomingInterceptor(Interceptor).
    
    Parameters:
    interceptor - an Interceptor
  - addIncomingInterceptor
```
void addIncomingInterceptor(Interceptor interceptor)
```
    Adds an interceptor which will be executed after packets are received from the server.
    
    Parameters:
    interceptor - an Interceptor
  - addOutgoingInterceptor
```
void addOutgoingInterceptor(Interceptor interceptor)
```
    Adds an interceptor which will be executed before packets are sent to the server.
    
    Parameters:
    interceptor - an Interceptor
  - removeInterceptor
```
@Deprecated
boolean removeInterceptor(Interceptor interceptor)
```
    Deprecated. As of HornetQ 2.3.0.Final, replaced by removeIncomingInterceptor(Interceptor) and removeOutgoingInterceptor(Interceptor)
    
    Removes an interceptor. Invoking this method is the same as invoking removeIncomingInterceptor(Interceptor).
    
    Parameters:
    interceptor - interceptor to remove
    
    Returns:
    true if the interceptor is removed from this factory, false else
  - removeIncomingInterceptor
```
boolean removeIncomingInterceptor(Interceptor interceptor)
```
    Removes an incoming interceptor.
    
    Parameters:
    interceptor - interceptor to remove
    
    Returns:
    true if the incoming interceptor is removed from this factory, false else
  - removeOutgoingInterceptor
```
boolean removeOutgoingInterceptor(Interceptor interceptor)
```
    Removes an outgoing interceptor.
    
    Parameters:
    interceptor - interceptor to remove
    
    Returns:
    true if the outgoing interceptor is removed from this factory, false else
  - close
```
void close()
```
    Closes this factory and release all its resources
    
    Specified by:
    
    close in interface AutoCloseable
  - getTopology
```
org.hornetq.core.client.impl.Topology getTopology()
```
    Exposes the Topology used by this ServerLocator.
    
    Returns:
    topology
  - isHA
```
boolean isHA()
```
    Whether this server receives topology notifications from the cluster as servers join or leave the cluster.
    
    Returns:
    true if the locator receives topology updates from the cluster
  - isCompressLargeMessage
```
boolean isCompressLargeMessage()
```
    Whether to compress large messages.
    
    Returns:
  - setCompressLargeMessage
```
void setCompressLargeMessage(boolean compressLargeMessages)
```
    Sets whether to compress or not large messages.
    
    Parameters:
    compressLargeMessages -
  - addClusterTopologyListener
```
void addClusterTopologyListener(ClusterTopologyListener listener)
```
  - removeClusterTopologyListener
```
void removeClusterTopologyListener(ClusterTopologyListener listener)
```

Interface ServerLocator

Method Summary

Method Detail

isClosed

disableFinalizeCheck

createSessionFactory

createSessionFactory

createSessionFactory

createSessionFactory

getClientFailureCheckPeriod

setClientFailureCheckPeriod

isCacheLargeMessagesClient

setCacheLargeMessagesClient

getConnectionTTL

setConnectionTTL

getCallTimeout

setCallTimeout

getCallFailoverTimeout

setCallFailoverTimeout

getMinLargeMessageSize

setMinLargeMessageSize

getConsumerWindowSize

setConsumerWindowSize

getConsumerMaxRate

setConsumerMaxRate

getConfirmationWindowSize

setConfirmationWindowSize

getProducerWindowSize

setProducerWindowSize

getProducerMaxRate

setProducerMaxRate

isBlockOnAcknowledge

setBlockOnAcknowledge

isBlockOnDurableSend

setBlockOnDurableSend

isBlockOnNonDurableSend

setBlockOnNonDurableSend

isAutoGroup

setAutoGroup

getGroupID

setGroupID

isPreAcknowledge

setPreAcknowledge

getAckBatchSize

setAckBatchSize

getStaticTransportConfigurations

getDiscoveryGroupConfiguration

isUseGlobalPools

setUseGlobalPools

getScheduledThreadPoolMaxSize

setScheduledThreadPoolMaxSize

getThreadPoolMaxSize

setThreadPoolMaxSize

getRetryInterval

setRetryInterval

getRetryIntervalMultiplier

setRetryIntervalMultiplier

getMaxRetryInterval

setMaxRetryInterval

getReconnectAttempts

setReconnectAttempts

setInitialConnectAttempts

getInitialConnectAttempts

isFailoverOnInitialConnection

setFailoverOnInitialConnection

getConnectionLoadBalancingPolicyClassName

setConnectionLoadBalancingPolicyClassName

getInitialMessagePacketSize

setInitialMessagePacketSize

addInterceptor

addIncomingInterceptor

addOutgoingInterceptor

removeInterceptor

removeIncomingInterceptor

removeOutgoingInterceptor

close

getTopology

isHA

isCompressLargeMessage

setCompressLargeMessage