TransactionConfigurationBuilder (Infinispan Distribution 6.0.2.Final API)

java.lang.Object
- org.infinispan.configuration.cache.TransactionConfigurationBuilder

All Implemented Interfaces:

Builder<TransactionConfiguration>, ConfigurationChildBuilder
```
public class TransactionConfigurationBuilder
extends Object
implements Builder<TransactionConfiguration>
```
Defines transactional (JTA) characteristics of the cache.

Author:

pmuir, Pedro Ruivo

Method Summary

Methods
Modifier and Type	Method and Description
`TransactionConfigurationBuilder`	`autoCommit(boolean b)` If the cache is transactional (i.e.
`Configuration`	`build()`
`TransactionConfigurationBuilder`	`cacheStopTimeout(long l)` If there are any ongoing transactions when a cache is stopped, Infinispan waits for ongoing remote and local transactions to finish.
`TransactionConfigurationBuilder`	`cacheStopTimeout(long l, TimeUnit unit)` If there are any ongoing transactions when a cache is stopped, Infinispan waits for ongoing remote and local transactions to finish.
`ClusteringConfigurationBuilder`	`clustering()`
`CompatibilityModeConfigurationBuilder`	`compatibility()`
`TransactionConfigurationBuilder`	`completedTxTimeout(long timeout)` The duration (millis) in which to keep information about the completion of a transaction.
`TransactionConfiguration`	`create()` Create the configuration bean
`CustomInterceptorsConfigurationBuilder`	`customInterceptors()`
`DataContainerConfigurationBuilder`	`dataContainer()`
`DeadlockDetectionConfigurationBuilder`	`deadlockDetection()`
`TransactionConfigurationBuilder`	`eagerLockingSingleNode(boolean b)` Deprecated. starting with Infinispan 5.1 single node locking is used by default
`EvictionConfigurationBuilder`	`eviction()`
`ExpirationConfigurationBuilder`	`expiration()`
`protected ConfigurationBuilder`	`getBuilder()`
`IndexingConfigurationBuilder`	`indexing()`
`InvocationBatchingConfigurationBuilder`	`invocationBatching()`
`JMXStatisticsConfigurationBuilder`	`jmxStatistics()`
`LockingConfigurationBuilder`	`locking()`
`TransactionConfigurationBuilder`	`lockingMode(LockingMode lockingMode)` Configures whether the cache uses optimistic or pessimistic locking.
`PersistenceConfigurationBuilder`	`persistence()`
`TransactionConfigurationBuilder`	`read(TransactionConfiguration template)` Reads the configuration from an already created configuration bean into this builder.
`TransactionConfigurationBuilder`	`reaperWakeUpInterval(long interval)` The time interval (millis) at which the thread that cleans up transaction completion information kicks in.
`RecoveryConfigurationBuilder`	`recovery()` This method allows configuration of the transaction recovery cache.
`SitesConfigurationBuilder`	`sites()`
`StoreAsBinaryConfigurationBuilder`	`storeAsBinary()`
`boolean`	`syncCommitPhase()` See `syncCommitPhase(boolean)`
`TransactionConfigurationBuilder`	`syncCommitPhase(boolean b)` If true, the cluster-wide commit phase in two-phase commit (2PC) transactions will be synchronous, so Infinispan will wait for responses from all nodes to which the commit was sent.
`TransactionConfigurationBuilder`	`syncRollbackPhase(boolean b)` If true, the cluster-wide rollback phase in two-phase commit (2PC) transactions will be synchronous, so Infinispan will wait for responses from all nodes to which the rollback was sent.
`String`	`toString()`
`TransactionConfigurationBuilder`	`transaction()`
`TransactionConfigurationBuilder`	`transactionManagerLookup(TransactionManagerLookup tml)` Configure Transaction manager lookup directly using an instance of TransactionManagerLookup.
`TransactionConfigurationBuilder`	`transactionMode(TransactionMode transactionMode)`
`TransactionConfigurationBuilder`	`transactionProtocol(TransactionProtocol transactionProtocol)`
`TransactionConfigurationBuilder`	`transactionSynchronizationRegistryLookup(TransactionSynchronizationRegistryLookup lookup)` Configure Transaction Synchronization Registry lookup directly using an instance of TransactionManagerLookup.
`UnsafeConfigurationBuilder`	`unsafe()`
`TransactionConfigurationBuilder`	`use1PcForAutoCommitTransactions(boolean b)` Before Infinispan 5.1 you could access the cache both transactionally and non-transactionally.
`TransactionConfigurationBuilder`	`useEagerLocking(boolean b)` Deprecated.
`boolean`	`useSynchronization()` See `useSynchronization(boolean)`
`TransactionConfigurationBuilder`	`useSynchronization(boolean b)` Configures whether the cache registers a synchronization with the transaction manager, or registers itself as an XA resource.
`void`	`validate()` Validate the data in this builder before building the configuration bean
`VersioningConfigurationBuilder`	`versioning()`

Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, wait, wait, wait

- Method Detail
  - autoCommit
```
public TransactionConfigurationBuilder autoCommit(boolean b)
```
    If the cache is transactional (i.e. transactionMode(org.infinispan.transaction.TransactionMode) == TransactionMode.TRANSACTIONAL) and transactionAutoCommit is enabled then for single operation transactions the user doesn't need to manually start a transaction, but a transactions is injected by the system. Defaults to true.
  - cacheStopTimeout
```
public TransactionConfigurationBuilder cacheStopTimeout(long l)
```
    If there are any ongoing transactions when a cache is stopped, Infinispan waits for ongoing remote and local transactions to finish. The amount of time to wait for is defined by the cache stop timeout. It is recommended that this value does not exceed the transaction timeout because even if a new transaction was started just before the cache was stopped, this could only last as long as the transaction timeout allows it.
    This configuration property may be adjusted at runtime
  - cacheStopTimeout
```
public TransactionConfigurationBuilder cacheStopTimeout(long l,
                                               TimeUnit unit)
```
    If there are any ongoing transactions when a cache is stopped, Infinispan waits for ongoing remote and local transactions to finish. The amount of time to wait for is defined by the cache stop timeout. It is recommended that this value does not exceed the transaction timeout because even if a new transaction was started just before the cache was stopped, this could only last as long as the transaction timeout allows it.
    This configuration property may be adjusted at runtime
  - eagerLockingSingleNode
```
@Deprecated
public TransactionConfigurationBuilder eagerLockingSingleNode(boolean b)
```
    Deprecated. starting with Infinispan 5.1 single node locking is used by default
    
    Only has effect for DIST mode and when useEagerLocking is set to true. When this is enabled, then only one node is locked in the cluster, disregarding numOwners config. On the opposite, if this is false, then on all cache.lock() calls numOwners RPCs are being performed. The node that gets locked is the main data owner, i.e. the node where data would reside if numOwners==1. If the node where the lock resides crashes, then the transaction is marked for rollback - data is in a consistent state, no fault tolerance.
  - lockingMode
```
public TransactionConfigurationBuilder lockingMode(LockingMode lockingMode)
```
    Configures whether the cache uses optimistic or pessimistic locking. If the cache is not transactional then the locking mode is ignored.
    
    See Also:
    Configuration.isTransactionalCache()
  - syncCommitPhase
```
public TransactionConfigurationBuilder syncCommitPhase(boolean b)
```
    If true, the cluster-wide commit phase in two-phase commit (2PC) transactions will be synchronous, so Infinispan will wait for responses from all nodes to which the commit was sent. Otherwise, the commit phase will be asynchronous. Keeping it as false improves performance of 2PC transactions, since any remote failures are trapped during the prepare phase anyway and appropriate rollbacks are issued.
    This configuration property may be adjusted at runtime
  - syncCommitPhase
```
public boolean syncCommitPhase()
```
    See syncCommitPhase(boolean)
    
    Returns:
    true if sync commit phase is enabled
  - syncRollbackPhase
```
public TransactionConfigurationBuilder syncRollbackPhase(boolean b)
```
    If true, the cluster-wide rollback phase in two-phase commit (2PC) transactions will be synchronous, so Infinispan will wait for responses from all nodes to which the rollback was sent. Otherwise, the rollback phase will be asynchronous. Keeping it as false improves performance of 2PC transactions.
    This configuration property may be adjusted at runtime.
  - transactionManagerLookup
```
public TransactionConfigurationBuilder transactionManagerLookup(TransactionManagerLookup tml)
```
    Configure Transaction manager lookup directly using an instance of TransactionManagerLookup. Calling this method marks the cache as transactional.
  - transactionSynchronizationRegistryLookup
```
public TransactionConfigurationBuilder transactionSynchronizationRegistryLookup(TransactionSynchronizationRegistryLookup lookup)
```
    Configure Transaction Synchronization Registry lookup directly using an instance of TransactionManagerLookup. Calling this method marks the cache as transactional.
  - transactionMode
```
public TransactionConfigurationBuilder transactionMode(TransactionMode transactionMode)
```
  - useEagerLocking
```
@Deprecated
public TransactionConfigurationBuilder useEagerLocking(boolean b)
```
    Deprecated.
    
    Only has effect for DIST mode and when useEagerLocking is set to true. When this is enabled, then only one node is locked in the cluster, disregarding numOwners config. On the opposite, if this is false, then on all cache.lock() calls numOwners RPCs are being performed. The node that gets locked is the main data owner, i.e. the node where data would reside if numOwners==1. If the node where the lock resides crashes, then the transaction is marked for rollback - data is in a consistent state, no fault tolerance.
    Note: Starting with infinispan 5.1 eager locking is replaced with pessimistic locking and can be enforced by setting transaction's locking mode to PESSIMISTIC.
  - useSynchronization
```
public TransactionConfigurationBuilder useSynchronization(boolean b)
```
    Configures whether the cache registers a synchronization with the transaction manager, or registers itself as an XA resource. It is often unnecessary to register as a full XA resource unless you intend to make use of recovery as well, and registering a synchronization is significantly more efficient.
    
    Parameters:
    b - if true, Synchronizations are used rather than XAResources when communicating with a TransactionManager.
  - useSynchronization
```
public boolean useSynchronization()
```
    See useSynchronization(boolean)
    
    Returns:
    true if synchronization enlistment is enabled
  - recovery
```
public RecoveryConfigurationBuilder recovery()
```
    This method allows configuration of the transaction recovery cache. When this method is called, it automatically enables recovery. So, if you want it to be disabled, make sure you call FluentConfiguration.RecoveryConfig.disable()
  - use1PcForAutoCommitTransactions
```
public TransactionConfigurationBuilder use1PcForAutoCommitTransactions(boolean b)
```
    Before Infinispan 5.1 you could access the cache both transactionally and non-transactionally. Naturally the non-transactional access is faster and offers less consistency guarantees. From Infinispan 5.1 onwards, mixed access is no longer supported, so if you wanna speed up transactional caches and you're ready to trade some consistency guarantees, you can enable use1PcForAutoCommitTransactions.
    What this configuration option does is force an induced transaction, that has been started by Infinispan as a result of enabling autoCommit, to commit in a single phase. So only 1 RPC instead of 2RPCs as in the case of a full 2 Phase Commit (2PC).
  - reaperWakeUpInterval
```
public TransactionConfigurationBuilder reaperWakeUpInterval(long interval)
```
    The time interval (millis) at which the thread that cleans up transaction completion information kicks in. Defaults to 1000.
  - completedTxTimeout
```
public TransactionConfigurationBuilder completedTxTimeout(long timeout)
```
    The duration (millis) in which to keep information about the completion of a transaction. Defaults to 3000.
  - validate
```
public void validate()
```
    Description copied from interface: Builder
    
    Validate the data in this builder before building the configuration bean
    
    Specified by:
    
    validate in interface Builder<TransactionConfiguration>
  - create
```
public TransactionConfiguration create()
```
    Description copied from interface: Builder
    
    Create the configuration bean
    
    Specified by:
    
    create in interface Builder<TransactionConfiguration>
    
    Returns:
  - read
```
public TransactionConfigurationBuilder read(TransactionConfiguration template)
```
    Description copied from interface: Builder
    
    Reads the configuration from an already created configuration bean into this builder. Returns an appropriate builder to allow fluent configuration
    
    Specified by:
    
    read in interface Builder<TransactionConfiguration>
    
    Parameters:
    template - the configuration from which to "clone" this config if needed.
  - toString
```
public String toString()
```
    Overrides:
    
    toString in class Object
  - transactionProtocol
```
public TransactionConfigurationBuilder transactionProtocol(TransactionProtocol transactionProtocol)
```
  - clustering
```
public ClusteringConfigurationBuilder clustering()
```
    Specified by:
    
    clustering in interface ConfigurationChildBuilder
  - customInterceptors
```
public CustomInterceptorsConfigurationBuilder customInterceptors()
```
    Specified by:
    
    customInterceptors in interface ConfigurationChildBuilder
  - dataContainer
```
public DataContainerConfigurationBuilder dataContainer()
```
    Specified by:
    
    dataContainer in interface ConfigurationChildBuilder
  - deadlockDetection
```
public DeadlockDetectionConfigurationBuilder deadlockDetection()
```
    Specified by:
    
    deadlockDetection in interface ConfigurationChildBuilder
  - eviction
```
public EvictionConfigurationBuilder eviction()
```
    Specified by:
    
    eviction in interface ConfigurationChildBuilder
  - expiration
```
public ExpirationConfigurationBuilder expiration()
```
    Specified by:
    
    expiration in interface ConfigurationChildBuilder
  - indexing
```
public IndexingConfigurationBuilder indexing()
```
    Specified by:
    
    indexing in interface ConfigurationChildBuilder
  - invocationBatching
```
public InvocationBatchingConfigurationBuilder invocationBatching()
```
    Specified by:
    
    invocationBatching in interface ConfigurationChildBuilder
  - jmxStatistics
```
public JMXStatisticsConfigurationBuilder jmxStatistics()
```
    Specified by:
    
    jmxStatistics in interface ConfigurationChildBuilder
  - persistence
```
public PersistenceConfigurationBuilder persistence()
```
    Specified by:
    
    persistence in interface ConfigurationChildBuilder
  - locking
```
public LockingConfigurationBuilder locking()
```
    Specified by:
    
    locking in interface ConfigurationChildBuilder
  - storeAsBinary
```
public StoreAsBinaryConfigurationBuilder storeAsBinary()
```
    Specified by:
    
    storeAsBinary in interface ConfigurationChildBuilder
  - transaction
```
public TransactionConfigurationBuilder transaction()
```
    Specified by:
    
    transaction in interface ConfigurationChildBuilder
  - versioning
```
public VersioningConfigurationBuilder versioning()
```
    Specified by:
    
    versioning in interface ConfigurationChildBuilder
  - unsafe
```
public UnsafeConfigurationBuilder unsafe()
```
    Specified by:
    
    unsafe in interface ConfigurationChildBuilder
  - sites
```
public SitesConfigurationBuilder sites()
```
    Specified by:
    
    sites in interface ConfigurationChildBuilder
  - compatibility
```
public CompatibilityModeConfigurationBuilder compatibility()
```
    Specified by:
    
    compatibility in interface ConfigurationChildBuilder
  - getBuilder
```
protected ConfigurationBuilder getBuilder()
```
  - build
```
public Configuration build()
```
    Specified by:
    
    build in interface ConfigurationChildBuilder

Class TransactionConfigurationBuilder

Method Summary

Methods inherited from class java.lang.Object

Method Detail

autoCommit

cacheStopTimeout

cacheStopTimeout

eagerLockingSingleNode

lockingMode

syncCommitPhase

syncCommitPhase

syncRollbackPhase

transactionManagerLookup

transactionSynchronizationRegistryLookup

transactionMode

useEagerLocking

useSynchronization

useSynchronization

recovery

use1PcForAutoCommitTransactions

reaperWakeUpInterval

completedTxTimeout

validate

create

read

toString

transactionProtocol

clustering

customInterceptors

dataContainer

deadlockDetection

eviction

expiration

indexing

invocationBatching

jmxStatistics

persistence

locking

storeAsBinary

transaction

versioning

unsafe

sites

compatibility

getBuilder

build