Preface
Evaluation license
Specification: JSR 365: Contexts and Dependency Injection for Java 2.0 Version: 2.0 PFD Status: Proposed Final Draft Specification Lead: Red Hat, Inc. Release: March 28th 2017 Copyright 2017 Red Hat, Inc. 100 East Davie Street, Raleigh, NC 27601, U.S.A. Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.
Foreword
Contexts and Dependency Injection 2.0 (JSR-365) is an update to Contexts and Dependency Injection 1.2 (JSR-346).
Starting with version 2.0 CDI targets Java SE and Java EE platforms. CDI in Java SE and CDI in a Java EE container share the features defined in core CDI.
Organisation of this document
This document is organized in 4 parts:
-
An introduction (this part), which is not part of the specification but introduces CDI concepts and give examples.
-
The core CDI specification: Part I - Core CDI.
-
Specific CDI features for Java SE: Part II - CDI in Java SE.
-
Specific CDI features for Java EE: Part III - CDI in Java EE.
Major changes
This CDI 2.0 includes important changes for the platform.
-
The spec was split into 3 parts as described in Organisation of this document to add the support for Java SE.
-
API to boot CDI in Java SE, described in Bootstrapping a CDI container in Java SE
-
Observer ordering, described in Observer ordering
-
Asynchronous event, described in Firing events asynchronously
-
Configurators for major SPI elements in Configurators interfaces
-
Possibility to configure or veto observer method in
ProcessObserverMethod
event -
Add built-in annotation literals in Built-in annotation literals
-
Make possible to apply interceptor on producer in The
InterceptionFactory
interface -
Alignment on Java 8 features (streams, lambdas, repeating qualifiers)
The full changelog can be found here.
Introduction
1. Architecture
This specification defines a powerful set of complementary services that help to improve the structure of application code.
-
A well-defined lifecycle for stateful objects bound to lifecycle contexts, where the set of contexts is extensible
-
A sophisticated, typesafe dependency injection mechanism, including the ability to select dependencies at either development or deployment time, without verbose configuration
-
Support for Java EE modularity and the Java EE component architecture - the modular structure of a Java EE application is taken into account when resolving dependencies between Java EE components
-
Integration with the Unified Expression Language (EL), allowing any contextual object to be used directly within a JSF or JSP page
-
The ability to decorate injected objects
-
The ability to associate interceptors to objects via typesafe interceptor bindings
-
An event notification model
-
A web conversation context in addition to the three standard web contexts defined by the Java Servlets specification
-
An SPI allowing portable extensions to integrate cleanly with the container
The services defined by this specification allow objects to be bound to lifecycle contexts, to be injected, to be associated with interceptors and decorators, and to interact in a loosely coupled fashion by firing and observing events. Various kinds of objects are injectable, including EJB 3 session beans, managed beans and Java EE resources. We refer to these objects in general terms as beans and to instances of beans that belong to contexts as contextual instances. Contextual instances may be injected into other objects by the dependency injection service.
To take advantage of these facilities, the developer provides additional bean-level metadata in the form of Java annotations and application-level metadata in the form of an XML descriptor.
The use of these services significantly simplifies the task of creating Java EE applications by integrating the Java EE web tier with Java EE enterprise services. In particular, EJB components may be used as JSF managed beans, thus integrating the programming models of EJB and JSF.
It’s even possible to integrate with third-party frameworks. A portable extension may provide objects to be injected or obtain contextual instances using the dependency injection service. The framework may even raise and observe events using the event notification service.
An application that takes advantage of these services may be designed to execute in either the Java EE environment or the Java SE environment. If the application uses Java EE services such as transaction management and persistence in the Java SE environment, the services are usually restricted to, at most, the subset defined for embedded usage by the EJB specification.
1.1. Contracts
This specification defines the responsibilities of:
-
the application developer who uses these services, and
-
the vendor who implements the functionality defined by this specification and provides a runtime environment in which the application executes.
This runtime environment is called the container. For example, the container might be a Java EE container or an embeddable EJB container.
Concepts, Programming model, Inheritance and specialization, Interceptor bindings, Decorator beans and Observer methods define the programming model for Java EE components that take advantage of the services defined by this specification, the responsibilities of the component developer, and the annotations used by the component developer to specify metadata.
Dependency injection and lookup, Scopes and contexts, Lifecycle of contextual instances, Decorators, Events and Interceptor resolution define the semantics and behavior of the services, the responsibilities of the container implementation and the APIs used by the application to interact directly with the container.
Packaging and deployment defines how Java EE applications that use the services defined by this specification must be packaged into bean archives, and the responsibilities of the container implementation at application initialization time.
Portable extensions, The Contextual
interface and The Context
interface define an SPI that allows portable extensions to integrate with the container.
1.2. Relationship to other specifications
An application developer creates container-managed components such as JavaBeans, EJBs or servlets and then provides additional metadata that declares additional behavior defined by this specification. These components may take advantage of the services defined by this specification, together with the enterprise and presentational aspects defined by other Java EE platform technologies.
In addition, this specification defines an SPI that allows alternative, non-platform technologies to integrate with the container and the Java EE environment, for example, alternative web presentation technologies.
1.2.1. Relationship to the Java EE platform specification
In the Java EE environment, all component classes supporting injection, as defined by the Java EE platform specification, may inject beans via the dependency injection service.
The Java EE platform specification defines a facility for injecting resources that exist in the Java EE component environment. Resources are identified by string-based names. This specification bolsters that functionality, adding the ability to inject an open-ended set of object types, including, but not limited to, component environment resources, based upon typesafe qualifiers.
1.2.2. Relationship to EJB
EJB defines a programming model for application components that access transactional resources in a multi-user environment. EJB allows concerns such as role-based security, transaction demarcation, concurrency and scalability to be specified declaratively using annotations and XML deployment descriptors and enforced by the EJB container at runtime.
EJB components may be stateful, but are not by nature contextual. References to stateful component instances must be explicitly passed between clients and stateful instances must be explicitly destroyed by the application.
This specification enhances the EJB component model with contextual lifecycle management.
Any session bean instance obtained via the dependency injection service is a contextual instance. It is bound to a lifecycle context and is available to other objects that execute in that context. The container automatically creates the instance when it is needed by a client. When the context ends, the container automatically destroys the instance.
Message-driven and entity beans are by nature non-contextual objects and may not be injected into other objects.
The container performs dependency injection on all session and message-driven bean instances, even those which are not contextual instances.
1.2.3. Relationship to managed beans
The Managed Beans specification defines the basic programming model for application components managed by the Java EE container.
As defined by this specification, most Java classes, including all JavaBeans, are managed beans.
This specification defines contextual lifecycle management and dependency injection as generic services applicable to all managed beans.
Any managed bean instance obtained via the dependency injection service is a contextual instance. It is bound to a lifecycle context and is available to other objects that execute in that context. The container automatically creates the instance when it is needed by a client. When the context ends, the container automatically destroys the instance.
The container performs dependency injection on all managed bean instances, even those which are not contextual instances.
1.2.4. Relationship to Dependency Injection for Java
The Dependency Injection for Java specification defines a set of annotations for the declaring injected fields, methods and constructors of a bean. The dependency injection service makes use of these annotations.
1.2.5. Relationship to Java Interceptors
The Java Interceptors specification defines the basic programming model and semantics for interceptors. This specification enhances that model by providing the ability to associate interceptors with beans using typesafe interceptor bindings.
1.2.6. Relationship to JSF
JavaServer Faces is a web-tier presentation framework that provides a component model for graphical user interface components and an event-driven interaction model that binds user interface components to objects accessible via Unified EL.
This specification allows any bean to be assigned a name. Thus, a JSF application may take advantage of the sophisticated context and dependency injection model defined by this specification.
1.2.7. Relationship to Bean Validation
Bean Validation provides a unified way of declaring and defining constraints on an object model, defines a runtime engine to validate objects and provides method validation.
The Bean Validation specification defines beans for Bean Validation managed objects including Validator
and ValidatorFactory
. A number of Bean Validation managed instances, including ConstraintValidator
s can take advantage of dependency injection.
Bean Validation also provides support for method parameter validation on any bean.
1.3. Introductory examples
The following examples demonstrate the use of lifecycle contexts and dependency injection.
1.3.1. JSF example
The following JSF page defines a login prompt for a web application:
<f:view>
<h:form>
<h:panelGrid columns="2" rendered="#{!login.loggedIn}">
<h:outputLabel for="username">Username:</h:outputLabel>
<h:inputText id="username" value="#{credentials.username}"/>
<h:outputLabel for="password">Password:</h:outputLabel>
<h:inputText id="password" value="#{credentials.password}"/>
</h:panelGrid>
<h:commandButton value="Login" action="#{login.login}" rendered="#{!login.loggedIn}"/>
<h:commandButton value="Logout" action="#{login.logout}" rendered="#{login.loggedIn}"/>
</h:form>
</f:view>
The Unified EL expressions in this page refer to beans named credentials
and login
.
The Credentials
bean has a lifecycle that is bound to the JSF request:
@Model
public class Credentials {
private String username;
private String password;
public String getUsername() { return username; }
public void setUsername(String username) { this.username = username; }
public String getPassword() { return password; }
public void setPassword(String password) { this.password = password; }
}
The @Model
annotation defined in Built-in stereotypes is a stereotype that identifies the Credentials
bean as a model object in an MVC architecture.
The Login
bean has a lifecycle that is bound to the HTTP session:
@SessionScoped @Model
public class Login implements Serializable {
@Inject Credentials credentials;
@Inject @Users EntityManager userDatabase;
private CriteriaQuery<User> query;
private Parameter<String> usernameParam;
private Parameter<String> passwordParam;
private User user;
@Inject
void initQuery(@Users EntityManagerFactory emf) {
CriteriaBuilder cb = emf.getCriteriaBuilder();
usernameParam = cb.parameter(String.class);
passwordParam = cb.parameter(String.class);
query = cb.createQuery(User.class);
Root<User> u = query.from(User.class);
query.select(u);
query.where( cb.equal(u.get(User_.username), usernameParam),
cb.equal(u.get(User_.password), passwordParam) );
}
public void login() {
List<User> results = userDatabase.createQuery(query)
.setParameter(usernameParam, credentials.getUsername())
.setParameter(passwordParam, credentials.getPassword())
.getResultList();
if ( !results.isEmpty() ) {
user = results.get(0);
}
}
public void logout() {
user = null;
}
public boolean isLoggedIn() {
return user!=null;
}
@Produces @LoggedIn User getCurrentUser() {
if (user==null) {
throw new NotLoggedInException();
}
else {
return user;
}
}
}
The @SessionScoped
annotation defined in Built-in scope types is a scope type that specifies the lifecycle of instances of Login
. Managed beans with this scope must be serializable.
The @Inject
annotation defined by the Dependency Injection for Java specification identifies an injected field which is initialized by the container when the bean is instantiated, or an initializer method which is called by the container after the bean is instantiated, with injected parameters.
The @Users
annotation is a qualifier type defined by the application:
@Qualifier
@Retention(RUNTIME)
@Target({METHOD, FIELD, PARAMETER, TYPE})
public @interface Users {}
The @LoggedIn
annotation is another qualifier type defined by the application:
@Qualifier
@Retention(RUNTIME)
@Target({METHOD, FIELD, PARAMETER, TYPE})
public @interface LoggedIn {}
The @Produces
annotation defined in Declaring a producer method identifies the method getCurrentUser()
as a producer method, which will be called whenever another bean in the system needs the currently logged-in user, for example, whenever the user
attribute of the DocumentEditor
class is injected by the container:
@Model
public class DocumentEditor {
@Inject Document document;
@Inject @LoggedIn User currentUser;
@Inject @Documents EntityManager docDatabase;
public void save() {
document.setCreatedBy(currentUser);
em.persist(document);
}
}
The @Documents
annotation is another application-defined qualifier type. The use of distinct qualifier types enables the container to distinguish which JPA persistence unit is required.
When the login form is submitted, JSF assigns the entered username and password to an instance of the Credentials
bean that is automatically instantiated by the container.
Next, JSF calls the login()
method of an instance of Login
that is automatically instantiated by the container.
This instance continues to exist for and be available to other requests in the same HTTP session, and provides the User
object representing the current user to any other bean that requires it (for example, DocumentEditor
). If the producer method is called before the login()
method initializes the user object, it throws a NotLoggedInException
.
1.3.2. EJB example
Alternatively, we could write our Login
bean to take advantage of the functionality defined by EJB:
@Stateful @SessionScoped @Model
public class Login {
@Inject Credentials credentials;
@Inject @Users EntityManager userDatabase;
...
private User user;
@Inject
void initQuery(@Users EntityManagerFactory emf) {
...
}
@TransactionAttribute(REQUIRES_NEW)
@RolesAllowed("guest")
public void login() {
...
}
public void logout() {
user = null;
}
public boolean isLoggedIn() {
return user!=null;
}
@RolesAllowed("user")
@Produces @LoggedIn User getCurrentUser() {
...
}
}
The EJB @Stateful
annotation specifies that this bean is an EJB stateful session bean.
The EJB @TransactionAttribute
and @RolesAllowed
annotations declare the EJB transaction demarcation and security attributes of the annotated methods.
1.3.3. Java EE component environment example
In the previous examples, we injected container-managed persistence contexts using qualifier types. We need to tell the container what persistence context is being referred to by which qualifier type. We can declare references to persistence contexts and other resources in the Java EE component environment in Java code.
public class Databases {
@Produces @PersistenceContext(unitName="UserData")
@Users EntityManager userDatabaseEntityManager;
@Produces @PersistenceUnit(unitName="UserData")
@Users EntityManagerFactory userDatabaseEntityManagerFactory;
@Produces @PersistenceContext(unitName="DocumentData")
@Documents EntityManager docDatabaseEntityManager;
}
The JPA @PersistenceContext
and @PersistenceUnit
annotations identify the JPA persistence unit.
1.3.4. Event example
Beans may raise events.
For example, our Login
class could raise events when a user logs in or out.
@SessionScoped @Model
public class Login implements Serializable {
@Inject Credentials credentials;
@Inject @Users EntityManager userDatabase;
@Inject @LoggedIn Event<User> userLoggedInEvent;
@Inject @LoggedOut Event<User> userLoggedOutEvent;
...
private User user;
@Inject
void initQuery(@Users EntityManagerFactory emf) {
...
}
public void login() {
List<User> results = ... ;
if ( !results.isEmpty() ) {
user = results.get(0);
userLoggedInEvent.fire(user);
}
}
public void logout() {
userLoggedOutEvent.fire(user);
user = null;
}
public boolean isLoggedIn() {
return user!=null;
}
@Produces @LoggedIn User getCurrentUser() {
...
}
}
The method fire()
of the built-in bean of type Event
defined in The Event
interface allows the application to fire events.
Events consist of an event object - in this case the User
- and event qualifiers.
Event qualifier - such as @LoggedIn
and @LoggedOut
- allow event consumers to specify which events of a certain type they are interested in.
Other beans may observe these events and use them to synchronize their internal state, with no coupling to the bean producing the events:
@SessionScoped
public class Permissions implements Serializable {
@Produces
private Set<Permission> permissions = new HashSet<Permission>();
@Inject @Users EntityManager userDatabase;
Parameter<String> usernameParam;
CriteriaQuery<Permission> query;
@Inject
void initQuery(@Users EntityManagerFactory emf) {
CriteriaBuilder cb = emf.getCriteriaBuilder();
usernameParam = cb.parameter(String.class);
query = cb.createQuery(Permission.class);
Root<Permission> p = query.from(Permission.class);
query.select(p);
query.where( cb.equal(p.get(Permission_.user).get(User_.username),
usernameParam) );
}
void onLogin(@Observes @LoggedIn User user) {
permissions = new HashSet<Permission>( userDatabase.createQuery(query)
.setParameter(usernameParam, user.getUsername())
.getResultList() );
}
void onLogout(@Observes @LoggedOut User user {
permissions.clear();
}
}
The @Produces
annotation applied to a field identifies the field as a producer field, as defined in Producer fields, a kind of shortcut version of a producer method.
This producer field allows the permissions of the current user to be injected to an injection point of type Set<Permission>
.
The @Observes
annotation defined in Declaring an observer method identifies the method with the annotated parameter as an observer method that is called by the container whenever an event matching the type and qualifiers of the annotated parameter is fired.
1.3.5. Injection point metadata example
It is possible to implement generic beans that introspect the injection point to which they belong. This makes it possible to implement injection for Logger
s, for example.
class Loggers {
@Produces Logger getLogger(InjectionPoint injectionPoint) {
return Logger.getLogger( injectionPoint.getMember().getDeclaringClass().getSimpleName() );
}
}
The InjectionPoint
interface defined in Injection point metadata, provides metadata about the injection point to the object being injected into it.
Then this class will have a Logger
named "Permissions"
injected:
@SessionScoped
public class Permissions implements Serializable {
@Inject Logger log;
...
}
1.3.6. Interceptor example
Interceptors allow common, cross-cutting concerns to be applied to beans via custom annotations. Interceptor types may be individually enabled or disabled at deployment time.
The AuthorizationInterceptor
class defines a custom authorization check:
@Secure @Interceptor
public class AuthorizationInterceptor {
@Inject @LoggedIn User user;
@Inject Logger log;
@AroundInvoke
public Object authorize(InvocationContext ic) throws Exception {
try {
if ( !user.isBanned() ) {
log.fine("Authorized");
return ic.proceed();
}
else {
log.fine("Not authorized");
throw new NotAuthorizedException();
}
}
catch (NotAuthenticatedException nae) {
log.fine("Not authenticated");
throw nae;
}
}
}
The @Interceptor
annotation, defined in Declaring the interceptor bindings of an interceptor, identifies the AuthorizationInterceptor
class as an interceptor.
The @Secure
annotation is a custom interceptor binding type, as defined in Interceptor binding types.
@Inherited
@InterceptorBinding
@Target({TYPE, METHOD})
@Retention(RUNTIME)
public @interface Secure {}
The @Secure
annotation is used to apply the interceptor to a bean:
@Model
public class DocumentEditor {
@Inject Document document;
@Inject @LoggedIn User user;
@Inject @Documents EntityManager em;
@Secure
public void save() {
document.setCreatedBy(currentUser);
em.persist(document);
}
}
When the save()
method is invoked, the authorize()
method of the interceptor will be called.
The invocation will proceed to the DocumentEditor
class only if the authorization check is successful.
1.3.7. Decorator example
Decorators are similar to interceptors, but apply only to beans of a particular Java interface. Like interceptors, decorators may be easily enabled or disabled at deployment time. Unlike interceptors, decorators are aware of the semantics of the intercepted method.
For example, the DataAccess
interface might be implemented by many beans:
public interface DataAccess<T, V> {
public V getId(T object);
public T load(V id);
public void save(T object);
public void delete(T object);
public Class<T> getDataType();
}
The DataAccessAuthorizationDecorator
class defines the authorization checks:
@Decorator
public abstract class DataAccessAuthorizationDecorator<T, V> implements DataAccess<T, V> {
@Inject @Delegate DataAccess<T, V> delegate;
@Inject Logger log;
@Inject Set<Permission> permissions;
public void save(T object) {
authorize(SecureAction.SAVE, object);
delegate.save(object);
}
public void delete(T object) {
authorize(SecureAction.DELETE, object);
delegate.delete(object);
}
private void authorize(SecureAction action, T object) {
V id = delegate.getId(object);
Class<T> type = delegate.getDataType();
if ( permissions.contains( new Permission(action, type, id) ) ) {
log.fine("Authorized for " + action);
}
else {
log.fine("Not authorized for " + action);
throw new NotAuthorizedException(action);
}
}
}
The @Decorator
annotation defined in Declaring a decorator identifies the DataAccessAuthorizationDecorator
class as a decorator.
The @Delegate
annotation defined in Decorator delegate injection points identifies the delegate, which the decorator uses to delegate method calls to the container.
The decorator applies to any bean that implements DataAccess
.
The decorator intercepts invocations just like an interceptor. However, unlike an interceptor, the decorator contains functionality that is specific to the semantics of the method being called.
Decorators may be declared abstract, relieving the developer of the responsibility of implementing all methods of the decorated interface. If a decorator does not implement a method of a decorated interface, the decorator will simply not be called when that method is invoked upon the decorated bean.
Part I - Core CDI
2. Concepts
A bean is a source of contextual objects which define application state and/or logic. These objects are called contextual instances of the bean. The container creates and destroys these instances and associates them with the appropriate context. Contextual instances of a bean may be injected into other objects (including other bean instances) that execute in the same context. A bean may bear metadata defining its lifecycle and interactions with other beans.
A bean comprises the following attributes:
-
A (nonempty) set of bean types
-
A (nonempty) set of qualifiers
-
A scope
-
Optionally, a bean name
-
A set of interceptor bindings
-
A bean implementation
Furthermore, a bean may or may not be an alternative.
A bean developer provides the bean implementation by writing business logic in Java code. The developer then defines the remaining attributes by explicitly annotating the bean class, or by allowing them to be defaulted by the container, as specified in Programming model.
The bean types and qualifiers of a bean determine where its instances will be injected by the container, as defined in Dependency injection and lookup.
The bean developer may also create interceptors and/or decorators or reuse existing interceptors and/or decorators. The interceptor bindings of a bean determine which interceptors will be applied at runtime. The bean types and qualifiers of a bean determine which decorators will be applied at runtime. Interceptors are defined by Java interceptors specification, and interceptor bindings are specified in Interceptor bindings. Decorators are defined in Decorators.
2.1. Functionality provided by the container to the bean
A bean is provided by the container with the following capabilities:
-
transparent creation and destruction and scoping to a particular context, specified in Scopes and contexts and Lifecycle of contextual instances,
-
scoped resolution by bean type and qualifier annotation type when injected into a Java-based client, as defined by Typesafe resolution,
-
lifecycle callbacks and automatic injection of other bean instances, specified in Programming model and Dependency injection and lookup,
-
method interception, callback interception, and decoration, as defined in Interceptor bindings and Decorators, and
-
event notification, as defined in Events.
2.2. Bean types
A bean type defines a client-visible type of the bean. A bean may have multiple bean types. For example, the following bean has four bean types:
public class BookShop
extends Business
implements Shop<Book> {
...
}
The bean types are BookShop
, Business
, Shop<Book>
and Object
.
The rules for determining the (unrestricted) set of bean types for a bean are defined in Bean types of a managed bean, Bean types of a producer method and Bean types of a producer field.
All beans have the bean type java.lang.Object
.
The bean types of a bean are used by the rules of typesafe resolution defined in Typesafe resolution.
2.2.1. Legal bean types
Almost any Java type may be a bean type of a bean:
-
A bean type may be an interface, a concrete class or an abstract class, and may be declared final or have final methods.
-
A bean type may be a parameterized type with actual type parameters and type variables.
-
A bean type may be an array type. Two array types are considered identical only if the element type is identical.
-
A bean type may be a primitive type. Primitive types are considered to be identical to their corresponding wrapper types in
java.lang
. -
A bean type may be a raw type.
However, some Java types are not legal bean types :
-
A type variable is not a legal bean type.
-
A parameterized type that contains a wildcard type parameter is not a legal bean type.
-
An array type whose component type is not a legal bean type.
Note that certain additional restrictions are specified in Unproxyable bean types for beans with a normal scope, as defined in Normal scopes and pseudo-scopes.
2.2.2. Restricting the bean types of a bean
The bean types of a bean may be restricted by annotating the bean class or producer method or field with the annotation @javax.enterprise.inject.Typed
.
@Typed(Shop.class)
public class BookShop
extends Business
implements Shop<Book> {
...
}
When a @Typed
annotation is explicitly specified, only the types whose classes are explicitly listed using the value
member, together with java.lang.Object
, are bean types of the bean.
In the example, the bean has a two bean types: Shop<Book>
and Object
.
If a bean class or producer method or field specifies a @Typed
annotation, and the value
member specifies a class which does not correspond to a type in the unrestricted set of bean types of a bean, the container automatically detects the problem and treats it as a definition error.
2.2.3. Typecasting between bean types
A client of a bean may typecast its contextual reference to a bean to any bean type of the bean which is a Java interface. However, the client may not in general typecast its contextual reference to an arbitrary concrete bean type of the bean. For example, if our managed bean was injected to the following field:
@Inject Business biz;
Then the following typecast is legal:
Shop<Book> bookShop = (Shop<Book>) biz;
However, the following typecast is not legal and might result in an exception at runtime:
BookShop bookShop = (BookShop) biz;
2.3. Qualifiers
For a given bean type, there may be multiple beans which implement the type.
For example, an application may have two implementations of the interface PaymentProcessor
:
class SynchronousPaymentProcessor
implements PaymentProcessor {
...
}
class AsynchronousPaymentProcessor
implements PaymentProcessor {
...
}
A client that needs a PaymentProcessor
that processes payments synchronously needs some way to distinguish between the two different implementations.
One approach would be for the client to explicitly specify the class that implements the PaymentProcessor
interface.
However, this approach creates a hard dependence between client and implementation - exactly what use of the interface was designed to avoid!
A qualifier type represents some client-visible semantic associated with a type that is satisfied by some implementations of the type (and not by others). For example, we could introduce qualifier types representing synchronicity and asynchronicity. In Java code, qualifier types are represented by annotations.
@Synchronous
class SynchronousPaymentProcessor
implements PaymentProcessor {
...
}
@Asynchronous
class AsynchronousPaymentProcessor
implements PaymentProcessor {
...
}
Finally, qualifier types are applied to injection points to distinguish which implementation is required by the client.
For example, when the container encounters the following injected field, an instance of SynchronousPaymentProcessor
will be injected:
@Inject @Synchronous PaymentProcessor paymentProcessor;
But in this case, an instance of AsynchronousPaymentProcessor
will be injected:
@Inject @Asynchronous PaymentProcessor paymentProcessor;
The container inspects the qualifier annotations and type of the injected attribute to determine the bean instance to be injected, according to the rules of typesafe resolution defined in Typesafe resolution.
An injection point may even specify multiple qualifiers.
Qualifier types are also used as event selectors by event consumers, as defined in Events, and to bind decorators to beans, as specified in Decorators.
2.3.1. Built-in qualifier types
Three standard qualifier types are defined in the package javax.enterprise.inject
. In addition, the built-in qualifier type @Named
is defined by the package javax.inject
.
Every bean has the built-in qualifier @Any
, even if it does not explicitly declare this qualifier, except for the special @New
qualified beans defined in @New
qualified beans.
If a bean does not explicitly declare a qualifier other than @Named
or @Any
, the bean has exactly one additional qualifier, of type @Default
. This is called the default qualifier.
The following declarations are equivalent:
@Default
public class Order { ... }
public class Order { ... }
Both declarations result in a bean with two qualifiers: @Any
and @Default
.
The following declaration results in a bean with three qualifiers: @Any
, @Default
and @Named("ord")
.
@Named("ord")
public class Order { ... }
The default qualifier is also assumed for any injection point that does not explicitly declare a qualifier, as defined in The default qualifier at injection points.
The following declarations, in which the use of the @Inject
annotation identifies the constructor parameter as an injection point, are equivalent:
public class Order {
@Inject
public Order(@Default OrderProcessor processor) { ... }
}
public class Order {
@Inject
public Order(OrderProcessor processor) { ... }
}
2.3.2. Defining new qualifier types
A qualifier type is a Java annotation defined as @Retention(RUNTIME)
. Typically a qualifier type is defined as @Target({METHOD, FIELD, PARAMETER, TYPE})
.
A qualifier type may be declared by specifying the @javax.inject.Qualifier
meta-annotation.
@Qualifier
@Retention(RUNTIME)
@Target({METHOD, FIELD, PARAMETER, TYPE})
public @interface Synchronous {}
@Qualifier
@Retention(RUNTIME)
@Target({METHOD, FIELD, PARAMETER, TYPE})
public @interface Asynchronous {}
A qualifier type may define annotation members.
@Qualifier
@Retention(RUNTIME)
@Target({METHOD, FIELD, PARAMETER, TYPE})
public @interface PayBy {
PaymentMethod value();
}
2.3.3. Declaring the qualifiers of a bean
The qualifiers of a bean are declared by annotating the bean class or producer method or field with the qualifier types.
@LDAP
class LdapAuthenticator
implements Authenticator {
...
}
public class Shop {
@Produces @All
public List<Product> getAllProducts() { ... }
@Produces @WishList
public List<Product> getWishList() { ... }
}
Any bean may declare multiple qualifier types.
@Synchronous @Reliable
class SynchronousReliablePaymentProcessor
implements PaymentProcessor {
...
}
2.3.4. Specifying qualifiers of an injected field
Qualifier types may be applied to injected fields (see Injected fields) to determine the bean that is injected, according to the rules of typesafe resolution defined in Typesafe resolution.
@Inject @LDAP Authenticator authenticator;
A bean may only be injected to an injection point if it has all the qualifiers of the injection point.
@Inject @Synchronous @Reliable PaymentProcessor paymentProcessor;
@Inject @All List<Product> catalog;
@Inject @WishList List<Product> wishList;
2.3.5. Specifying qualifiers of a method or constructor parameter
Qualifier types may be applied to parameters of producer methods, initializer methods, disposer methods, observer methods or bean constructors (see Programming model) to determine the bean instance that is passed when the method is called by the container. The container uses the rules of typesafe resolution defined in Typesafe resolution to determine values for these parameters.
For example, when the container encounters the following producer method, an instance of SynchronousPaymentProcessor
will be passed to the first parameter and an instance of AsynchronousPaymentProcessor
will be passed to the second parameter:
@Produces
PaymentProcessor getPaymentProcessor(@Synchronous PaymentProcessor sync,
@Asynchronous PaymentProcessor async) {
return isSynchronous() ? sync : async;
}
2.3.6. Repeating qualifiers
In some cases, it may be useful to have a repeated qualifier for your type safe resolution. A repeated qualifier behaves just as any other qualifier does. For example, the below qualifier is a repeatable qualifier
@Target({ PARAMETER, FIELD, METHOD, TYPE })
@Retention(RUNTIME)
@Documented
@Qualifier
@Repeatable(Locations.class)
public @interface Location {
String value();
}
@Target({ PARAMETER, FIELD, METHOD, TYPE })
@Retention(RUNTIME)
public @interface Locations {
Location[] value();
}
Now you can define appropriate producers and injection points for repeated qualifiers.
@Produces
@Location("north")
@Location("south")
public Coordinate createCoordinate() {
// ...
}
@Inject
@Location("north")
@Location("south")
private Coordinate coordinate;
A partial match injection point will still work in this case (from the same producer method)
@Inject
@Location("south")
private Coordinate coordinate;
However, adding the follow producer method will continue to give you an ambiguous resolution error (assuming the other producer exists as well)
@Produces
@Location("south")
public Coordinate createSouthCoordinate() {
// ...
}
2.4. Scopes
Scoped objects, exist in a well-defined lifecycle context:
-
they may be automatically created when needed and then automatically destroyed when the context in which they were created ends, and
-
their state is automatically shared by clients that execute in the same context.
All beans have a scope. The scope of a bean determines the lifecycle of its instances, and which instances of the bean are visible to instances of other beans, as defined in Scopes and contexts. A scope type is represented by an annotation type.
For example, an object that represents the current user is represented by a session scoped object:
@Produces @SessionScoped User getCurrentUser() { ... }
An object that represents an order is represented by a conversation scoped object:
@ConversationScoped
public class Order { ... }
A list that contains the results of a search screen might be represented by a request scoped object:
@Produces @RequestScoped @Named("orders")
List<Order> getOrderSearchResults() { ... }
The set of scope types is extensible.
2.4.1. Built-in scope types
There are five standard scope types defined by this specification, all defined in the package javax.enterprise.context
.
-
The container must provide an implementation of the @RequestScoped, @ApplicationScoped and @SessionScoped annotations defined in Context management for built-in scopes. Note that these standard scopes can be extended by third-party extensions as defined in The
Context
interface -
The
@ConversationScoped
annotation represents the conversation scope defined in Conversation context lifecycle. -
Finally, there is a
@Dependent
pseudo-scope for dependent objects, as defined in Dependent pseudo-scope.
If an interceptor or decorator has any scope other than @Dependent
, non-portable behavior results.
2.4.2. Defining new scope types
A scope type is a Java annotation defined as @Retention(RUNTIME)
. Typically a scope type is defined as @Target({TYPE, METHOD, FIELD})
. All scope types must also specify the @javax.inject.Scope
or @javax.enterprise.context.NormalScope
meta-annotation.
A scope type must not have any attributes. If a scope type has attributes non-portable behavior results.
For example, the following annotation declares a "business process scope":
@Inherited
@NormalScope
@Target({TYPE, METHOD, FIELD})
@Retention(RUNTIME)
public @interface BusinessProcessScoped {}
Custom scopes are normally defined by portable extensions, which must also provide a context object, as defined in The Context
interface, that implements the custom scope.
2.4.3. Declaring the bean scope
The scope of a bean is defined by annotating the bean class or producer method or field with a scope type.
A bean class or producer method or field may specify at most one scope type annotation. If a bean class or producer method or field specifies multiple scope type annotations, the container automatically detects the problem and treats it as a definition error.
public class Shop {
@Produces @ApplicationScoped @All
public List<Product> getAllProducts() { ... }
@Produces @SessionScoped @WishList
public List<Product> getWishList() { ..... }
}
Likewise, a bean with the custom business process scope may be declared by annotating it with the @BusinessProcessScoped
annotation:
@BusinessProcessScoped
public class Order { ... }
Alternatively, a scope type may be specified using a stereotype annotation, as defined in Declaring the stereotypes for a bean.
2.4.4. Default scope
When no scope is explicitly declared by annotating the bean class or producer method or field the scope of a bean is defaulted.
The default scope for a bean which does not explicitly declare a scope depends upon its declared stereotypes:
-
If the bean does not declare any stereotype with a declared default scope, the default scope for the bean is
@Dependent
. -
If all stereotypes declared by the bean that have some declared default scope have the same default scope, then that scope is the default scope for the bean.
-
If there are two different stereotypes declared by the bean that declare different default scopes, then there is no default scope and the bean must explicitly declare a scope. If it does not explicitly declare a scope, the container automatically detects the problem and treats it as a definition error.
If a bean explicitly declares a scope, any default scopes declared by stereotypes are ignored.
2.5. Default bean discovery mode
The default bean discovery mode for a bean archive is annotated
, and such a bean archive is said to be an implicit bean archive as defined in Bean archives.
If the bean discovery mode is annotated
then:
-
bean classes that don’t have bean defining annotation (as defined in Bean defining annotations) are not discovered, and
-
producer methods (as defined in Producer methods) whose bean class does not have a bean defining annotation are not discovered, and
-
producer fields (as defined in Producer fields) whose bean class does not have a bean defining annotation are not discovered, and
-
disposer methods (as defined in Disposer methods) whose bean class does not have a bean defining annotation are not discovered, and
-
observer methods (as defined in Declaring an observer method) whose bean class does not have a bean defining annotation are not discovered.
2.5.1. Bean defining annotations
A bean class may have a bean defining annotation, allowing it to be placed anywhere in an application, as defined in Bean archives. A bean class with a bean defining annotation is said to be an implicit bean.
The set of bean defining annotations contains:
-
@ApplicationScoped
,@SessionScoped
,@ConversationScoped
and@RequestScoped
annotations, -
all other normal scope types,
-
@Interceptor
and@Decorator
annotations, -
all stereotype annotations (i.e. annotations annotated with
@Stereotype
), -
and the
@Dependent
scope annotation.
If one of these annotations is declared on a bean class, then the bean class is said to have a bean defining annotation. For example, this dependent scoped bean has a bean defining annotation:
@Dependent
public class BookShop
extends Business
implements Shop<Book> {
...
}
whilst this dependent scoped bean does not have a bean defining annotation:
public class CoffeeShop
extends Business
implements Shop<Coffee> {
...
}
Note that to ensure compatibility with other JSR-330 implementations, all pseudo-scope annotations except @Dependent
are not bean defining annotations.
However, a stereotype annotation including a pseudo-scope annotation is a bean defining annotation.
2.6. Bean names
A bean may have a bean name. A bean with a name may be referred to by its name when used in a non typesafe environment (like the Unified Expression Language). A valid bean name is a period-separated list of valid EL identifiers.
The following strings are valid bean names:
com.acme.settings
orderManager
Subject to the restrictions defined in Ambiguous names, multiple beans may share the same bean name.
Bean names are used by the rules of bean name resolution defined in Name resolution.
2.6.1. Declaring the bean name
To specify the name of a bean, the qualifier @javax.inject.Named
is applied to the bean class or producer method or field.
This bean is named currentOrder
:
@Named("currentOrder")
public class Order { ... }
2.6.2. Default bean names
In the following circumstances, a default name must be assigned by the container:
-
A bean class or producer method or field of a bean declares a
@Named
annotation and no bean name is explicitly specified by thevalue
member. -
A bean declares a stereotype that declares an empty
@Named
annotation, and the bean does not explicitly specify a bean name.
The default name for a bean depends upon the kind of the bean. The rules for determining the default name for a bean are defined in Default bean name for a managed bean, Default bean name for a producer method and Default bean name for a producer field.
2.7. Alternatives
An alternative is a bean that must be explicitly selected if it should be available for lookup, injection or name resolution.
2.7.1. Declaring an alternative
An alternative may be declared by annotating the bean class or producer method or field with the @Alternative
annotation.
@Alternative
public class MockOrder extends Order { ... }
Alternatively, an alternative may be declared by annotating a bean, producer method or producer field with a stereotype that declares an @Alternative
annotation.
If an interceptor or decorator is an alternative, non-portable behavior results.
2.8. Stereotypes
In many systems, use of architectural patterns produces a set of recurring bean roles. A stereotype allows a framework developer to identify such a role and declare some common metadata for beans with that role in a central place.
A stereotype encapsulates any combination of:
-
a default scope, and
-
a set of interceptor bindings.
A stereotype may also specify that:
-
all beans with the stereotype have defaulted bean names, or that
-
all beans with the stereotype are alternatives.
A bean may declare zero, one or multiple stereotypes.
2.8.1. Defining new stereotypes
A bean stereotype is a Java annotation defined as @Retention(RUNTIME)
. Typically a bean stereotype is defined as @Target({TYPE, METHOD, FIELD})
, @Target(TYPE)
, @Target(METHOD)
, @Target(FIELD)
or @Target({METHOD, FIELD})
.
A stereotype may be declared by specifying the @javax.enterprise.inject.Stereotype
meta-annotation.
@Stereotype
@Target(TYPE)
@Retention(RUNTIME)
public @interface Action {}
2.8.1.1. Declaring the default scope for a stereotype
The default scope of a stereotype is defined by annotating the stereotype with a scope type. A stereotype may declare at most one scope. If a stereotype declares more than one scope, the container automatically detects the problem and treats it as a definition error.
For example, the following stereotype might be used to identify action classes in a web application:
@RequestScoped
@Stereotype
@Target(TYPE)
@Retention(RUNTIME)
public @interface Action {}
Then actions would have scope @RequestScoped
unless the scope is explicitly specified by the bean.
2.8.1.2. Specifying interceptor bindings for a stereotype
The interceptor bindings of a stereotype are defined by annotating the stereotype with the interceptor binding types. A stereotype may declare zero, one or multiple interceptor bindings, as defined in Interceptor bindings for stereotypes.
We may specify interceptor bindings that apply to all actions:
@RequestScoped
@Secure
@Transactional
@Stereotype
@Target(TYPE)
@Retention(RUNTIME)
public @interface Action {}
2.8.1.3. Declaring a @Named
stereotype
A stereotype may declare an empty @Named
annotation, which specifies that every bean with the stereotype has a defaulted name when a name is not explicitly specified by the bean.
A @Named
qualifier declared by a stereotype is not added to the qualifiers of a bean with the stereotype.
If a stereotype declares a non-empty @Named
annotation, the container automatically detects the problem and treats it as a definition error.
We may specify that all actions have bean names:
@RequestScoped
@Secure
@Transactional
@Named
@Stereotype
@Target(TYPE)
@Retention(RUNTIME)
public @interface Action {}
A stereotype should not declare any qualifier annotation other than @Named
. If a stereotype declares any other qualifier annotation, non-portable behavior results.
A stereotype should not be annotated @Typed
. If a stereotype is annotated @Typed
, non-portable behavior results.
2.8.1.4. Declaring an @Alternative
stereotype
A stereotype may declare an @Alternative
annotation, which specifies that every bean with the stereotype is an alternative.
We may specify that all mock objects are alternatives:
@Alternative
@Stereotype
@Target(TYPE)
@Retention(RUNTIME)
public @interface Mock {}
2.8.1.5. Stereotypes with additional stereotypes
A stereotype may declare other stereotypes.
@Auditable
@Action
@Stereotype
@Target(TYPE)
@Retention(RUNTIME)
public @interface AuditableAction {}
Stereotype declarations are transitive - a stereotype declared by a second stereotype is inherited by all beans and other stereotypes that declare the second stereotype.
Stereotypes declared @Target(TYPE)
may not be applied to stereotypes declared @Target({TYPE, METHOD, FIELD})
, @Target(METHOD)
, @Target(FIELD)
or @Target({METHOD, FIELD})
.
2.8.2. Declaring the stereotypes for a bean
Stereotype annotations may be applied to a bean class or producer method or field.
@Action
public class LoginAction { ... }
The default scope declared by the stereotype may be overridden by the bean:
@Mock @ApplicationScoped @Action
public class MockLoginAction extends LoginAction { ... }
Multiple stereotypes may be applied to the same bean:
@Dao @Action
public class LoginAction { ... }
2.8.3. Built-in stereotypes
The built-in stereotype @javax.enterprise.inject.Model
is intended for use with beans that define the model layer of an MVC web application architecture such as JSF:
@Named
@RequestScoped
@Stereotype
@Target({TYPE, METHOD, FIELD})
@Retention(RUNTIME)
public @interface Model {}
In addition, the special-purpose @Interceptor
and @Decorator
stereotypes are defined in Declaring the interceptor bindings of an interceptor and Declaring a decorator.
2.9. Problems detected automatically by the container
When the application violates a rule defined by this specification, the container automatically detects the problem. There are three kinds of problem:
-
Definition errors - occur when a single bean definition violates the rules of this specification. If a definition error exists, the container must throw a subclass of
javax.enterprise.inject.spi.DefinitionException
. -
Deployment problems - occur when there are problems resolving dependencies, or inconsistent specialization, in a particular deployment. If a deployment problem occurs, the container must throw a subclass of
javax.enterprise.inject.spi.DeploymentException
. -
Exceptions - occur at runtime
Definition errors are developer errors. They may be detected by tooling at development time, and are also detected by the container at initialization time. If a definition error exists in a deployment, initialization will be aborted by the container.
Deployment problems are detected by the container at initialization time. If a deployment problem exists in a deployment, initialization will be aborted by the container.
The container is permitted to define a non-portable mode, for use at development time, in which some definition errors and deployment problems do not cause application initialization to abort.
Exceptions represent problems that may not be detected until they actually occur at runtime. All exceptions defined by this specification are unchecked exceptions. All exceptions defined by this specification may be safely caught and handled by the application.
3. Programming model
The container provides built-in support for injection and contextual lifecycle management of the following kinds of bean:
-
Managed beans
-
Producer methods and fields
All containers must support managed beans, producer methods and producer fields.
A portable extension may provide other kinds of beans by implementing the interface Bean
defined in The Bean
interface.
3.1. Managed beans
A managed bean is a bean that is implemented by a Java class. This class is called the bean class of the managed bean. The basic lifecycle and semantics of managed beans are defined by the Managed Beans specification.
If the bean class of a managed bean is annotated with both @Interceptor
and @Decorator
, the container automatically detects the problem and treats it as a definition error.
If a managed bean has a non-static public field, it must have scope @Dependent
. If a managed bean with a non-static public field declares any scope other than @Dependent
, the container automatically detects the problem and treats it as a definition error.
If the managed bean class is a generic type, it must have scope @Dependent
. If a managed bean with a parameterized bean class declares any scope other than @Dependent
, the container automatically detects the problem and treats it as a definition error.
3.1.1. Which Java classes are managed beans?
A Java class is a managed bean if it meets all of the following conditions:
-
It is not an inner class.
-
It is a non-abstract class, or is annotated
@Decorator
. -
It does not implement
javax.enterprise.inject.spi.Extension
. -
It is not annotated
@Vetoed
or in a package annotated@Vetoed
. -
It has an appropriate constructor - either:
-
the class has a constructor with no parameters, or
-
the class declares a constructor annotated
@Inject
.
-
All Java classes that meet these conditions are managed beans and thus no special declaration is required to define a managed bean.
If packages annotated @Vetoed
are split across classpath entries, non-portable behavior results.
An application can prevent packages being split across jars by sealing the package as defined by the JAR File Specification.
3.1.2. Bean types of a managed bean
The unrestricted set of bean types for a managed bean contains the bean class, every superclass and all interfaces it implements directly or indirectly.
The resulting set of bean types for a managed bean consists only of legal bean types, all other types are removed from the set of bean types.
Note the additional restrictions upon bean types of beans with normal scopes defined in Unproxyable bean types.
3.1.3. Declaring a managed bean
A managed bean with a constructor that takes no parameters does not require any special annotations. The following classes are beans:
public class Shop { .. }
class PaymentProcessorImpl implements PaymentProcessor { ... }
If the managed bean does not have a constructor that takes no parameters, it must have a constructor annotated @Inject
. No additional special annotations are required.
A bean class may specify a scope, bean name, stereotypes and/or qualifiers:
@ConversationScoped @Default
public class ShoppingCart { ... }
A managed bean may extend another managed bean:
@Named("loginAction")
public class LoginAction { ... }
@Mock
@Named("loginAction")
public class MockLoginAction extends LoginAction { ... }
The second bean is a "mock object" that overrides the implementation of LoginAction
when running in an embedded CDI based integration testing environment.
3.1.4. Specializing a managed bean
If a bean class of a managed bean X is annotated @Specializes
, then the bean class of X must directly extend the bean class of another managed bean Y.
Then X directly specializes Y, as defined in Specialization.
If the bean class of X does not directly extend the bean class of another managed bean, the container automatically detects the problem and treats it as a definition error.
For example, MockLoginAction
directly specializes LoginAction
:
public class LoginAction { ... }
@Mock @Specializes
public class MockLoginAction extends LoginAction { ... }
3.2. Producer methods
A producer method acts as a source of objects to be injected, where:
-
the objects to be injected are not required to be instances of beans, or
-
the concrete type of the objects to be injected may vary at runtime, or
-
the objects require some custom initialization that is not performed by the bean constructor.
A producer method must be a default-access, public, protected or private, non-abstract method of a managed bean class. A producer method may be either static or non-static.
If a producer method sometimes returns a null value, then the producer method must have scope @Dependent
. If a producer method returns a null value at runtime, and the producer method declares any other scope, an IllegalProductException
is thrown by the container.
This restriction allows the container to use a client proxy, as defined in Client proxies.
If the producer method return type is a parameterized type, it must specify an actual type parameter or type variable for each type parameter.
If a producer method return type contains a wildcard type parameter or is an array type whose component type contains a wildcard type parameter, the container automatically detects the problem and treats it as a definition error.
If the producer method return type is a parameterized type with a type variable, it must have scope @Dependent
. If a producer method with a parameterized return type with a type variable declares any scope other than @Dependent
, the container automatically detects the problem and treats it as a definition error.
If a producer method return type is a type variable or an array type whose component type is a type variable the container automatically detects the problem and treats it as a definition error.
The application may call producer methods directly. However, if the application calls a producer method directly, no parameters will be passed to the producer method by the container; the returned object is not bound to any context; and its lifecycle is not managed by the container.
A bean may declare multiple producer methods.
3.2.1. Bean types of a producer method
The bean types of a producer method depend upon the method return type:
-
If the return type is an interface, the unrestricted set of bean types contains the return type, all interfaces it extends directly or indirectly and
java.lang.Object
. -
If a return type is primitive or is a Java array type, the unrestricted set of bean types contains exactly two types: the method return type and
java.lang.Object
. -
If the return type is a class, the unrestricted set of bean types contains the return type, every superclass and all interfaces it implements directly or indirectly.
The resulting set of bean types for a producer method consists only of legal bean types, all other types are removed from the set of bean types.
Note the additional restrictions upon bean types of beans with normal scopes defined in Unproxyable bean types.
3.2.2. Declaring a producer method
A producer method may be declared by annotating a method with the @javax.enterprise.inject.Produces
annotation.
public class Shop {
@Produces PaymentProcessor getPaymentProcessor() { ... }
@Produces List<Product> getProducts() { ... }
}
A producer method may also specify scope, bean name, stereotypes and/or qualifiers.
public class Shop {
@Produces @ApplicationScoped @Catalog @Named("catalog")
List<Product> getProducts() { ... }
}
If a producer method is annotated @Inject
, has a parameter annotated @Disposes
, has a parameter annotated @Observes
, or has a parameter annotated @ObservesAsync
, the container automatically detects the problem and treats it as a definition error.
Interceptors and decorators may not declare producer methods.
If an interceptor or decorator has a method annotated @Produces
, the container automatically detects the problem and treats it as a definition error.
A producer method may have any number of parameters. All producer method parameters are injection points.
public class OrderFactory {
@Produces @ConversationScoped
public Order createCurrentOrder(Shop shop, @Selected Product product) {
Order order = new Order(product, shop);
return order;
}
}
3.2.3. Specializing a producer method
If a producer method X is annotated @Specializes
, then it must be non-static and directly override another producer method Y.
Then X directly specializes Y, as defined in Specialization.
If the method is static or does not directly override another producer method, the container automatically detects the problem and treats it as a definition error.
@Mock
public class MockShop extends Shop {
@Override @Specializes
@Produces
PaymentProcessor getPaymentProcessor() {
return new MockPaymentProcessor();
}
@Override @Specializes
@Produces
List<Product> getProducts() {
return PRODUCTS;
}
...
}
3.2.4. Default bean name for a producer method
The default name for a producer method is the method name, unless the method follows the JavaBeans property getter naming convention, in which case the default name is the JavaBeans property name.
For example, this producer method is named products
:
@Produces @Named
public List<Product> getProducts() { ... }
This producer method is named paymentProcessor
:
@Produces @Named
public PaymentProcessor paymentProcessor() { ... }
3.3. Producer fields
A producer field is a slightly simpler alternative to a producer method.
A producer field must be a default-access, public, protected or private, field of a managed bean class. A producer field may be either static or non-static.
If a producer field sometimes contains a null value when accessed, then the producer field must have scope @Dependent
. If a producer field contains a null value at runtime, and the producer field declares any other scope, an IllegalProductException
is thrown by the container.
This restriction allows the container to use a client proxy, as defined in Client proxies.
If the producer field type is a parameterized type, it must specify an actual type parameter or type variable for each type parameter.
If a producer field type contains a wildcard type parameter or is an array type whose component type contains a wildcard parameter, the container automatically detects the problem and treats it as a definition error.
If the producer field type is a parameterized type with a type variable, it must have scope @Dependent
. If a producer field with a parameterized type with a type variable declares any scope other than @Dependent
, the container automatically detects the problem and treats it as a definition error.
If a producer field type is a type variable or is an array type whose component type is a type variable the container automatically detects the problem and treats it as a definition error.
The application may access producer fields directly. However, if the application accesses a producer field directly, the returned object is not bound to any context; and its lifecycle is not managed by the container.
A bean may declare multiple producer fields.
3.3.1. Bean types of a producer field
The bean types of a producer field depend upon the field type:
-
If the field type is an interface, the unrestricted set of bean types contains the field type, all interfaces it extends directly or indirectly and
java.lang.Object
. -
If a field type is primitive or is a Java array type, the unrestricted set of bean types contains exactly two types: the field type and
java.lang.Object
. -
If the field type is a class, the unrestricted set of bean types contains the field type, every superclass and all interfaces it implements directly or indirectly.
The resulting set of bean types for a producer field consists only of legal bean types, all other types are removed from the set of bean types.
Note the additional restrictions upon bean types of beans with normal scopes defined in Unproxyable bean types.
3.3.2. Declaring a producer field
A producer field may be declared by annotating a field with the @javax.enterprise.inject.Produces
annotation.
public class Shop {
@Produces PaymentProcessor paymentProcessor = ....;
@Produces List<Product> products = ....;
}
A producer field may also specify scope, bean name, stereotypes and/or qualifiers.
public class Shop {
@Produces @ApplicationScoped @Catalog @Named("catalog")
List<Product> products = ....;
}
If a producer field is annotated @Inject
, the container automatically detects the problem and treats it as a definition error.
Interceptors and decorators may not declare producer fields.
If an interceptor or decorator has a field annotated @Produces
, the container automatically detects the problem and treats it as a definition error.
3.4. Disposer methods
A disposer method allows the application to perform customized cleanup of an object returned by a producer method or producer field.
A disposer method must be a default-access, public, protected or private, non-abstract method of a managed bean class. A disposer method may be either static or non-static.
A bean may declare multiple disposer methods.
3.4.1. Disposed parameter of a disposer method
Each disposer method must have exactly one disposed parameter, of the same type as the corresponding producer method return type or producer field type. When searching for disposer methods for a producer method or producer field the container considers the type and qualifiers of the disposed parameter. If a producer method or producer field declared by the same bean class is assignable to the disposed parameter, according to the rules of typesafe resolution defined in Typesafe resolution, the container must call this method when destroying any instance returned by that producer method or producer field.
A disposer method may resolve to multiple producer methods or producer fields declared by the bean class, in which case the container must call it when destroying any instance returned by any of these producer methods or producer fields.
3.4.2. Declaring a disposer method
A disposer method may be declared by annotating a parameter @javax.enterprise.inject.Disposes
. That parameter is the disposed parameter.
Qualifiers may be declared by annotating the disposed parameter:
public class UserDatabaseEntityManager {
@Produces @ConversationScoped @UserDatabase
public EntityManager create(EntityManagerFactory emf) {
return emf.createEntityManager();
}
public void close(@Disposes @UserDatabase EntityManager em) {
em.close();
}
}
public class Resources {
private EntityManagerFactory emf;
@PostConstruct
public void setupEntityManagerFactory() {
emf = Persistence.createEntityManagerFactory("userDatabase");
}
@Produces @UserDatabase
public EntityManager start() {
return emf.createEntityManager();
}
public void close(@Disposes @UserDatabase EntityManager em) {
em.close();
}
}
If a method has more than one parameter annotated @Disposes
, the container automatically detects the problem and treats it as a definition error.
If a disposer method is annotated @Produces
or @Inject
has a parameter annotated @Observes
or has a parameter annotated @ObservesAsync
, the container automatically detects the problem and treats it as a definition error.
Interceptors and decorators may not declare disposer methods.
If an interceptor or decorator has a method annotated @Disposes
, the container automatically detects the problem and treats it as a definition error.
In addition to the disposed parameter, a disposer method may declare additional parameters, which may also specify qualifiers. These additional parameters are injection points.
public void close(@Disposes @UserDatabase EntityManager em, Logger log) { ... }
3.4.3. Disposer method resolution
A disposer method is bound to a producer method or producer field if:
-
the producer method or producer field is declared by the same bean class as the disposer method, and
-
the producer method or producer field is assignable to the disposed parameter, according to the rules of typesafe resolution defined in Typesafe resolution (using Assignability of raw and parameterized types).
If there are multiple disposer methods for a single producer method or producer field, the container automatically detects the problem and treats it as a definition error.
If there is no producer method or producer field declared by the bean class that is assignable to the disposed parameter of a disposer method, the container automatically detects the problem and treats it as a definition error.
3.5. Bean constructors
When the container instantiates a bean class, it calls the bean constructor. The bean constructor is a default-access, public, protected or private constructor of the bean class.
The application may call bean constructors directly. However, if the application directly instantiates the bean, no parameters are passed to the constructor by the container; the returned object is not bound to any context; no dependencies are injected by the container; and the lifecycle of the new instance is not managed by the container.
3.5.1. Declaring a bean constructor
The bean constructor may be identified by annotating the constructor @Inject
.
@SessionScoped
public class ShoppingCart implements Serializable {
private User customer;
@Inject
public ShoppingCart(User customer) {
this.customer = customer;
}
public ShoppingCart(ShoppingCart original) {
this.customer = original.customer;
}
ShoppingCart() {}
...
}
@ConversationScoped
public class Order {
private Product product;
private User customer;
@Inject
public Order(@Selected Product product, User customer) {
this.product = product;
this.customer = customer;
}
public Order(Order original) {
this.product = original.product;
this.customer = original.customer;
}
Order() {}
...
}
If a bean class does not explicitly declare a constructor using @Inject
, the constructor that accepts no parameters is the bean constructor.
If a bean class has more than one constructor annotated @Inject
, the container automatically detects the problem and treats it as a definition error.
If a bean constructor has a parameter annotated @Disposes
, @Observes
, or @ObservesAsync
, the container automatically detects the problem and treats it as a definition error.
A bean constructor may have any number of parameters. All parameters of a bean constructor are injection points.
3.6. Injected fields
An injected field is a non-static, non-final field of a bean class or of any other classes supporting injection.
3.6.1. Declaring an injected field
An injected field may be declared by annotating the field @javax.inject.Inject
.
@ConversationScoped
public class Order {
@Inject @Selected Product product;
@Inject User customer;
}
If an injected field is annotated @Produces
, the container automatically detects the problem and treats it as a definition error.
3.7. Initializer methods
An initializer method is a default-access, public, protected or private, non-abstract, non-static, non-generic method of a bean class or of any other classes supporting injection.
A bean class may declare multiple (or zero) initializer methods.
Method interceptors are never called when the container calls an initializer method.
The application may call initializer methods directly, but then no parameters will be passed to the method by the container.
3.7.1. Declaring an initializer method
An initializer method may be declared by annotating the method @javax.inject.Inject
.
@ConversationScoped
public class Order {
private Product product;
private User customer;
@Inject
void setProduct(@Selected Product product) {
this.product = product;
}
@Inject
public void setCustomer(User customer) {
this.customer = customer;
}
}
If a generic method of a bean is annotated @Inject
, the container automatically detects the problem and treats it as a definition error.
If an initializer method is annotated @Produces
, has a parameter annotated @Disposes
, has a parameter annotated @Observes
, or has a parameter annotated @ObservesAsync
, the container automatically detects the problem and treats it as a definition error.
An initializer method may have any number of parameters. All initializer method parameters are injection points.
3.8. The default qualifier at injection points
If an injection point declares no qualifier, the injection point has exactly one qualifier, the default qualifier @Default
.
The following are equivalent:
@ConversationScoped
public class Order {
private Product product;
private User customer;
@Inject
public void init(@Selected Product product, User customer) {
this.product = product;
this.customer = customer;
}
}
@ConversationScoped
public class Order {
private Product product;
private User customer;
@Inject
public void init(@Selected Product product, @Default User customer) {
this.product = product;
this.customer = customer;
}
}
The following definitions are equivalent:
public class Payment {
public Payment(BigDecimal amount) { ... }
@Inject Payment(Order order) {
this(order.getAmount();
}
}
public class Payment {
public Payment(BigDecimal amount) { ... }
@Inject Payment(@Default Order order) {
this(order.getAmount();
}
}
Finally, the following are equivalent:
@Inject Order order;
@Inject @Default Order order;
3.9. The qualifier @Named
at injection points
The use of @Named
as an injection point qualifier is not recommended, except in the case of integration with legacy code that uses string-based names to identify beans.
If an injected field declares a @Named
annotation that does not specify the value
member, the name of the field is assumed.
For example, the following field has the qualifier @Named("paymentService")
:
@Inject @Named PaymentService paymentService;
If any other injection point declares a @Named
annotation that does not specify the value
member, the container automatically detects the problem and treats it as a definition error.
3.10. @New
qualified beans
The @New qualifier was deprecated in CDI 1.1. CDI applications are encouraged to inject @Dependent scoped beans instead.
For each managed bean, a second bean exists which:
-
has the same bean class,
-
has the same bean types,
-
has the same bean constructor, initializer methods and injected fields, and
-
has the same interceptor bindings.
However, this second bean:
-
has scope
@Dependent
, -
has exactly one qualifier:
@javax.enterprise.inject.New(X.class)
whereX
is the bean class, -
has no bean name,
-
has no stereotypes,
-
has no observer methods, producer methods or fields or disposer methods, and
-
is not an alternative, and
-
is enabled, in the sense of Enabled and disabled beans, if and only if some other enabled bean has an injection point with the qualifier
@New(X.class)
whereX
is the bean class.
This bean is called the @New qualified bean for the class X
.
Note that this second bean exists - and may be enabled and available for injection - even if the first bean is disabled, as defined by Enabled and disabled beans, or if the bean class is deployed outside of a bean archive, as defined in Bean archives, and is therefore not discovered during the bean discovery process defined in Packaging and deployment.
The container discovers @New
qualified beans by inspecting injection points of other enabled beans.
This allows the application to obtain a new instance of a bean which is not bound to the declared scope, but has had dependency injection performed.
@Produces @ConversationScoped
@Special Order getSpecialOrder(@New(Order.class) Order order) {
...
return order;
}
When the qualifier @New
is specified at an injection point and no value
member is explicitly specified, the container defaults the value
to the declared type of the injection point.
So the following injection point has qualifier @New(Order.class)
:
@Produces @ConversationScoped
@Special Order getSpecialOrder(@New Order order) { ... }
3.11. Unproxyable bean types
The container uses proxies to provide certain functionality. Certain legal bean types cannot be proxied by the container:
-
classes which don’t have a non-private constructor with no parameters,
-
classes which are declared final,
-
classes which have non-static, final methods with public, protected or default visibility,
-
primitive types,
-
and array types.
A bean type must be proxyable if an injection point resolves to a bean:
-
that requires a client proxy, or
-
that has an associated decorator, or
-
that has a bound interceptor.
Otherwise, the container automatically detects the problem, and treats it as a deployment problem.
4. Inheritance and specialization
A bean may inherit type-level metadata and members from its superclasses.
Inheritance of type-level metadata by beans from their superclasses is controlled via use of the Java @Inherited
meta-annotation.
Type-level metadata is never inherited from interfaces implemented by a bean.
Member-level metadata is not inherited. However, injected fields, initializer methods, lifecycle callback methods and non-static observer methods are inherited by beans from their superclasses.
The implementation of a bean may be extended by the implementation of a second bean. This specification recognizes two distinct scenarios in which this situation occurs:
-
The second bean specializes the first bean in certain deployment scenarios. In these deployments, the second bean completely replaces the first, fulfilling the same role in the system.
-
The second bean is simply reusing the Java implementation, and otherwise bears no relation to the first bean. The first bean may not even have been designed for use as a contextual object.
The two cases are quite dissimilar.
By default, Java implementation reuse is assumed. In this case, the two beans have different roles in the system, and may both be available in a particular deployment.
The bean developer may explicitly specify that the second bean specializes the first. Then the second bean inherits, and may not override, the qualifiers and bean name of the first bean. The second bean is able to serve the same role in the system as the first. In a particular deployment, only one of the two beans may fulfill that role.
4.1. Inheritance of type-level metadata
Suppose a class X is extended directly or indirectly by the bean class of a managed bean Y.
-
If X is annotated with a qualifier type, stereotype or interceptor binding type Z then Y inherits the annotation if and only if Z declares the
@Inherited
meta-annotation and neither Y nor any intermediate class that is a subclass of X and a superclass of Y declares an annotation of type Z. (This behavior is defined by the Java Language Specification.) -
If X is annotated with a scope type Z then Y inherits the annotation if and only if Z declares the
@Inherited
meta-annotation and neither Y nor any intermediate class that is a subclass of X and a superclass of Y declares a scope type. (This behavior is different to what is defined in the Java Language Specification.)
A scope type explicitly declared by X and inherited by Y from X takes precedence over default scopes of stereotypes declared or inherited by Y.
For annotations defined by the application or third-party extensions, it is recommended that:
-
scope types should be declared
@Inherited
, -
qualifier types should not be declared
@Inherited
, -
interceptor binding types should be declared
@Inherited
, and -
stereotypes may be declared
@Inherited
, depending upon the semantics of the stereotype.
All scope types, qualifier types, and interceptor binding types defined by this specification adhere to these recommendations.
The stereotypes defined by this specification are not declared @Inherited
.
However, in special circumstances, these recommendations may be ignored.
Note that the @Named
annotation is not declared @Inherited
and bean names are not inherited unless specialization is used.
4.2. Inheritance of member-level metadata
Suppose a class X is extended directly or indirectly by the bean class of a managed bean Y.
-
If X declares an injected field
x
then Y inheritsx
. (This behavior is defined by the Common Annotations for the Java Platform specification.) -
If X declares an initializer, non-static observer,
@PostConstruct
or@PreDestroy
methodx()
then Y inheritsx()
if and only if neither Y nor any intermediate class that is a subclass of X and a superclass of Y overrides the methodx()
. (This behavior is defined by the Common Annotations for the Java Platform specification.) -
If X declares a non-static method
x()
annotated with an interceptor binding type Z then Y inherits the binding if and only if neither Y nor any intermediate class that is a subclass of X and a superclass of Y overrides the methodx()
. (This behavior is defined by the Common Annotations for the Java Platform specification.) -
If X declares a non-static producer or disposer method
x()
then Y does not inherit this method. (This behavior is different to what is defined in the Common Annotations for the Java Platform specification.) -
If X declares a non-static producer field
x
then Y does not inherit this field. (This behavior is different to what is defined in the Common Annotations for the Java Platform specification.)
If X is a generic type, and an injection point or observer method declared by X is inherited by Y, and the declared type of the injection point or event parameter contains type variables declared by X, the type of the injection point or event parameter inherited in Y is the declared type, after substitution of actual type arguments declared by Y or any intermediate class that is a subclass of X and a superclass of Y.
For example, the bean DaoClient
has an injection point of type Dao<T>
.
public class DaoClient<T> {
@Inject Dao<T> dao;
...
}
This injection point is inherited by UserDaoClient
, but the type of the inherited injection point is Dao<User>
.
public class UserDaoClient
extends DaoClient<User> { ... }
4.3. Specialization
If two beans both support a certain bean type, and share at least one qualifier, then they are both eligible for injection to any injection point with that declared type and qualifier.
Consider the following beans:
@Default @Asynchronous
public class AsynchronousService implements Service {
...
}
@Alternative
public class MockAsynchronousService extends AsynchronousService {
...
}
Suppose that the MockAsynchronousService
alternative is selected, as defined in Modularity:
@Alternative @Priority(javax.interceptor.Interceptor.Priority.APPLICATION+100)
public class MockAsynchronousService extends AsynchronousService {
...
}
Then, according to the rules of Unsatisfied and ambiguous dependencies, the following ambiguous dependency is resolvable, and so the attribute will receive an instance of MockAsynchronousService
:
@Inject Service service;
However, the following attribute will receive an instance of AsynchronousService
, even though MockAsynchronousService
is a selected alternative, because MockAsynchronousService
does not have the qualifier @Asynchronous
:
@Inject @Asynchronous Service service;
This is a useful behavior in some circumstances, however, it is not always what is intended by the developer.
The only way one bean can completely override a second bean at all injection points is if it implements all the bean types and declares all the qualifiers of the second bean. However, if the second bean declares a producer method or observer method, then even this is not enough to ensure that the second bean is never called!
To help prevent developer error, the first bean may:
-
directly extend the bean class of the second bean, or
-
directly override the producer method, in the case that the second bean is a producer method, and then
explicitly declare that it specializes the second bean.
@Specializes
public class MockAsynchronousService extends AsynchronousService {
...
}
When an enabled bean, as defined in Enabled and disabled beans, specializes a second bean, we can be certain that the second bean is never instantiated or called by the container. Even if the second bean defines a producer or observer method, the method will never be called.
4.3.1. Direct and indirect specialization
The annotation @javax.enterprise.inject.Specializes
is used to indicate that one bean directly specializes another bean, as defined in Specializing a managed bean and Specializing a producer method.
Formally, a bean X is said to specialize another bean Y if there is either:
-
direct specialization, where X directly specializes Y, or
-
transitive specialization, where a bean Z exists, such that X directly specializes Z and Z specializes Y.
Then X will inherit the qualifiers and bean name of Y:
-
the qualifiers of X include all qualifiers of Y, together with all qualifiers declared explicitly by X, and
-
if Y has a bean name, the bean name of X is the same as the bean name of Y.
Furthermore, X must have all the bean types of Y. If X does not have some bean type of Y, the container automatically detects the problem and treats it as a definition error.
If Y has a bean name and X declares a bean name explicitly the container automatically detects the problem and treats it as a definition error.
For example, the following bean would have the inherited qualifiers @Default
and @Asynchronous
:
@Mock @Specializes
public class MockAsynchronousService extends AsynchronousService {
...
}
If AsynchronousService
declared a bean name:
@Default @Asynchronous @Named("asyncService")
public class AsynchronousService implements Service{
...
}
Then the bean name would also automatically be inherited by MockAsynchronousService
.
If an interceptor or decorator is annotated @Specializes
, non-portable behavior results.
5. Dependency injection and lookup
The container injects references to contextual instances to the following kinds of injection point:
-
Any injected field of a bean class
-
Any parameter of a bean constructor, bean initializer method, producer method or disposer method
-
Any parameter of an observer method, except for the event parameter
References to contextual instances may also be obtained by programmatic lookup.
In general, a bean type or bean name does not uniquely identify a bean. When resolving a bean at an injection point, the container considers bean type, qualifiers and selected alternatives. This allows bean developers to decouple type from implementation.
The container is required to support circularities in the bean dependency graph where at least one bean participating in every circular chain of dependencies has a normal scope, as defined in Normal scopes and pseudo-scopes. The container is not required to support circular chains of dependencies where every bean participating in the chain has a pseudo-scope.
5.1. Modularity
Beans and their clients may be deployed in modules in a module architecture. In a module architecture, certain modules are considered bean archives. The library may be an explicit bean archive or an implicit bean archive, as defined in Bean archives.
A bean packaged in a certain module is available for injection, lookup and name resolution to classes packaged in some other module if and only if the bean class of the bean is required to be accessible to the other module by the class accessibility requirements of the module architecture.
An alternative is not available for injection, lookup or name resolution to classes in a module unless the module is a bean archive and the alternative is explicitly selected for the bean archive or the application.
5.1.1. Declaring selected alternatives
This specification defines two methods of selecting alternatives.
From Contexts and Dependency Injection 1.1 onwards the @Priority
annotation allows an alternative to be selected for an entire application.
Contexts and Dependency Injection 1.0 allowed only for an alternative to be selected for a bean archive.
5.1.1.1. Declaring selected alternatives for an application
An alternative may be given a priority for the application:
-
by placing the
@Priority
annotation on the bean class of a managed bean, or -
by placing the
@Priority
annotation on the bean class that declares the producer method, field or resource.
Custom bean implementations which are also alternatives may implement Prioritized interface in which case they will be enabled for entire application with given priority.
5.1.1.2. Declaring selected alternatives for a bean archive
An alternative may be explicitly declared using the <alternatives>
element of the beans.xml
file of the bean archive.
The <alternatives>
element contains a list of bean classes and stereotypes.
An alternative is selected for the bean archive if either:
-
the alternative is a managed bean and the bean class of the bean is listed,
-
the alternative is a producer method, field or resource, and the bean class that declares the method or field is listed, or
-
any
@Alternative
stereotype of the alternative is listed.
<beans xmlns="http://xmlns.jcp.org/xml/ns/javaee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://xmlns.jcp.org/xml/ns/javaee http://xmlns.jcp.org/xml/ns/javaee/beans_2_0.xsd" bean-discovery-mode="all" version="2.0">
<alternatives>
<class>com.acme.myfwk.InMemoryDatabase</class>
<stereotype>com.acme.myfwk.Mock</stereotype>
<stereotype>com.acme.site.Australian</stereotype>
</alternatives>
</beans>
For each child <class>
element the container verifies that either:
-
a class with the specified name exists and is annotated with
@Alternative
or an@Alternative
stereotype, or -
a class with the specified name exists and declares a field or method annotated with
@Produces
and, at the same time, annotated with@Alternative
or an@Alternative
stereotype, or -
an alternative bean whose bean class has the specified name exists.
Otherwise, the container automatically detects the problem and treats it as a deployment problem.
Each child <stereotype>
element must specify the name of an @Alternative
stereotype annotation.
If there is no annotation with the specified name, or the annotation is not an @Alternative
stereotype, the container automatically detects the problem and treats it as a deployment problem.
If the same type is listed twice under the <alternatives>
element, the container automatically detects the problem and treats it as a deployment problem.
For a custom implementation of the Bean
interface defined in The Bean
interface, the container calls isAlternative()
to determine whether the bean is an alternative, and getBeanClass()
and getStereotypes()
to determine whether an alternative is selected in a certain bean archive.
5.1.2. Enabled and disabled beans
A bean is said to be enabled if:
-
it is deployed in a bean archive, and
-
it is not a producer method or field of a disabled bean, and
-
it is not specialized by any other enabled bean, as defined in Specialization, and either
-
it is not an alternative, or it is a selected alternative of at least one bean archive or the application.
Otherwise, the bean is said to be disabled.
Note that @New
qualified beans defines a special rule that determines whether a @New
qualified bean is enabled or disabled.
This rule applies as only to @New
qualified beans, as an exception to the normal rule defined here.
5.1.3. Inconsistent specialization
Suppose an enabled bean X specializes a second bean Y. If there is another enabled bean that specializes Y we say that inconsistent specialization exists. The container automatically detects inconsistent specialization and treats it as a deployment problem.
5.1.4. Inter-module injection
A bean is available for injection in a certain module if:
-
the bean is not an interceptor or decorator,
-
the bean is enabled,
-
the bean is either not an alternative, or the module is a bean archive and the bean is a selected alternative of the bean archive, or the bean is a selected alternative of the application, and
-
the bean class is required to be accessible to classes in the module, according to the class accessibility requirements of the module architecture.
For a custom implementation of the Bean
interface defined in The Bean
interface, the container calls getBeanClass()
to determine the bean class of the bean and InjectionPoint.getMember()
and then Member.getDeclaringClass()
to determine the class that declares an injection point.
5.2. Typesafe resolution
The process of matching a bean to an injection point is called typesafe resolution. Typesafe resolution usually occurs at application initialization time, allowing the container to warn the user if any enabled beans have unsatisfied or unresolvable ambiguous dependencies.
5.2.1. Performing typesafe resolution
The container considers bean type and qualifiers when resolving a bean to be injected to an injection point. The type and qualifiers of the injection point are called the required type and required qualifiers.
A bean is assignable to a given injection point if:
-
The bean has a bean type that matches the required type. For this purpose, primitive types are considered to match their corresponding wrapper types in
java.lang
and array types are considered to match only if their element types are identical. Parameterized and raw types are considered to match if they are identical or if the bean type is assignable to the required type, as defined in Assignability of raw and parameterized types or Assignability of raw and parameterized types for delegate injection points. -
The bean has all the required qualifiers. If no required qualifiers were explicitly specified, the container assumes the required qualifier
@Default
. A bean has a required qualifier if it has a qualifier with (a) the same type and (b) the same annotation member value for each member which is not annotated@javax.enterprise.util.Nonbinding
.
A bean is eligible for injection to a certain injection point if:
-
it is available for injection in the module that contains the class that declares the injection point, and
-
it is assignable to the injection point (using Assignability of raw and parameterized types).
For a custom implementation of the Bean
interface defined in The Bean
interface, the container calls getTypes()
and getQualifiers()
to determine the bean types and qualifiers.
5.2.2. Unsatisfied and ambiguous dependencies
An unsatisfied dependency exists at an injection point when no bean is eligible for injection to the injection point. An ambiguous dependency exists at an injection point when multiple beans are eligible for injection to the injection point.
Note that an unsatisfied or ambiguous dependency cannot exist for a decorator delegate injection point, defined in Decorator delegate injection points.
When an ambiguous dependency exists, the container attempts to resolve the ambiguity. The container eliminates all eligible beans that are not alternatives, except for producer methods and fields of beans that are alternatives. If:
-
there is exactly one bean remaining, the container will select this bean, and the ambiguous dependency is called resolvable.
-
all the beans left are alternatives with a priority, or producer methods or fields of beans that are alternatives with a priority, then the container will determine the highest priority value, and eliminate all beans, except for alternatives with the highest priority and producer methods and fields of alternatives with the highest priority value. If there is exactly one bean remaining, the container will select this bean, and the ambiguous dependency is called resolvable.
The container must validate all injection points of all enabled beans, all observer methods and all disposer methods when the application is initialized to ensure that there are no unsatisfied or unresolvable ambiguous dependencies. If an unsatisfied or unresolvable ambiguous dependency exists, the container automatically detects the problem and treats it as a deployment problem.
For a custom implementation of the Bean
interface defined in The Bean
interface, the container calls getInjectionPoints()
to determine the set of injection points.
5.2.3. Legal injection point types
Any legal bean type, as defined in Legal bean types may be the required type of an injection point. Furthermore, the required type of an injection point may contain a wildcard type parameter. However, a type variable is not a legal injection point type.
If an injection point type is a type variable, the container automatically detects the problem and treats it as a definition error.
5.2.4. Assignability of raw and parameterized types
A parameterized bean type is considered assignable to a raw required type if the raw types are identical and all type parameters of the bean type are either unbounded type variables or java.lang.Object
.
A parameterized bean type is considered assignable to a parameterized required type if they have identical raw type and for each parameter:
-
the required type parameter and the bean type parameter are actual types with identical raw type, and, if the type is parameterized, the bean type parameter is assignable to the required type parameter according to these rules, or
-
the required type parameter is a wildcard, the bean type parameter is an actual type and the actual type is assignable to the upper bound, if any, of the wildcard and assignable from the lower bound, if any, of the wildcard, or
-
the required type parameter is a wildcard, the bean type parameter is a type variable and the upper bound of the type variable is assignable to or assignable from the upper bound, if any, of the wildcard and assignable from the lower bound, if any, of the wildcard, or
-
the required type parameter is an actual type, the bean type parameter is a type variable and the actual type is assignable to the upper bound, if any, of the type variable, or
-
the required type parameter and the bean type parameter are both type variables and the upper bound of the required type parameter is assignable to the upper bound, if any, of the bean type parameter.
For example, Dao
is eligible for injection to any injection point of type @Default Dao<Order>
, @Default Dao<User>
, @Default Dao<?>
, @Default Dao<? extends Persistent>
or @Default Dao<X extends Persistent>
where X
is a type variable.
public class Dao<T extends Persistent> { ... }
Furthermore, UserDao
is eligible for injection to any injection point of type @Default Dao<User>
, @Default Dao<?>
, @Default Dao<? extends Persistent>
or @Default Dao<? extends User>
.
public class UserDao extends Dao<User> { ... }
A raw bean type is considered assignable to a parameterized required type if the raw types are identical and all type parameters of the required type are either unbounded type variables or java.lang.Object.
Note that a special set of rules, defined in Assignability of raw and parameterized types for delegate injection points, apply if and only if the injection point is a decorator delegate injection point.
5.2.5. Primitive types and null values
For the purposes of typesafe resolution and dependency injection, primitive types and their corresponding wrapper types in the package java.lang
are considered identical and assignable.
If necessary, the container performs boxing or unboxing when it injects a value to a field or parameter of primitive or wrapper type.
If an injection point of primitive type resolves to a producer method or producer field that returns a null value at runtime, the container must inject the primitive type’s default value as defined by the Java Language Specification.
5.2.6. Qualifier annotations with members
Qualifier types may have annotation members.
@PayBy(CHEQUE) class ChequePaymentProcessor implements PaymentProcessor { ... }
@PayBy(CREDIT_CARD) class CreditCardPaymentProcessor implements PaymentProcessor { ... }
Then only ChequePaymentProcessor
is a candidate for injection to the following attribute:
@Inject @PayBy(CHEQUE) PaymentProcessor paymentProcessor;
On the other hand, only CreditCardPaymentProcessor
is a candidate for injection to this attribute:
@Inject @PayBy(CREDIT_CARD) PaymentProcessor paymentProcessor;
The container calls the equals()
method of the annotation member value to compare values.
An annotation member may be excluded from consideration using the @Nonbinding
annotation.
@Qualifier
@Retention(RUNTIME)
@Target({METHOD, FIELD, PARAMETER, TYPE})
public @interface PayBy {
PaymentMethod value();
@Nonbinding String comment() default "";
}
Array-valued or annotation-valued members of a qualifier type should be annotated @Nonbinding
in a portable application.
If an array-valued or annotation-valued member of a qualifier type is not annotated @Nonbinding
, non-portable behavior results.
5.2.7. Multiple qualifiers
A bean class or producer method or field may declare multiple qualifiers.
@Synchronous @PayBy(CHEQUE) class ChequePaymentProcessor implements PaymentProcessor { ... }
Then ChequePaymentProcessor
would be considered a candidate for injection into any of the following attributes:
@Inject @PayBy(CHEQUE) PaymentProcessor paymentProcessor;
@Inject @Synchronous PaymentProcessor paymentProcessor;
@Inject @Synchronous @PayBy(CHEQUE) PaymentProcessor paymentProcessor;
A bean must declare all of the qualifiers that are specified at the injection point to be considered a candidate for injection.
5.3. Name resolution
The process of matching a bean to a name is called name resolution. Since there is no typing information available during name resolution, the container may consider only the bean name. Name resolution usually occurs at runtime.
A name resolves to a bean if:
-
the bean has the given bean name, and
-
the bean is available for injection in the module where the name resolution is requested.
For a custom implementation of the Bean
interface defined in The Bean
interface, the container calls getName()
to determine the bean name.
5.3.1. Ambiguous names
An ambiguous name exists when a name resolves to multiple beans. When an ambiguous name exists, the container attempts to resolve the ambiguity. The container eliminates all eligible beans that are not alternatives selected for the bean archive or selected for the application, except for producer methods and fields of beans that are alternatives. If:
-
there is exactly one bean remaining, the container will select this bean, and the ambiguous dependency is called resolvable.
-
all the beans left are alternatives with a priority, then the container will determine the highest priority value, and eliminate all beans, except for producer methods and fields of beans that are alternatives with the highest priority value. If there is exactly one bean remaining, the container will select this bean, and the ambiguous dependency is called resolvable.
All unresolvable ambiguous names are detected by the container when the application is initialized. Suppose two beans are both available for injection in a certain module, and either:
-
the two beans have the same bean name and the name is not resolvable, or
-
the bean name of one bean is of the form
x.y
, wherey
is a valid bean name, andx
is the bean name of the other bean,
the container automatically detects the problem and treats it as a deployment problem.
5.4. Client proxies
An injected reference, or reference obtained by programmatic lookup, is usually a contextual reference as defined by Contextual reference for a bean.
A contextual reference to a bean with a normal scope, as defined in Normal scopes and pseudo-scopes, is not a direct reference to a contextual instance of the bean (the object returned by Contextual.create()
). Instead, the contextual reference is a client proxy object.
A client proxy implements/extends some or all of the bean types of the bean and delegates all method calls to the current instance (as defined in Normal scopes and pseudo-scopes) of the bean.
There are a number of reasons for this indirection:
-
The container must guarantee that when any valid injected reference to a bean of normal scope is invoked, the invocation is always processed by the current instance of the injected bean. In certain scenarios, for example if a request scoped bean is injected into a session scoped bean, or into a servlet, this rule requires an indirect reference. (Note that the
@Dependent
pseudo-scope is not a normal scope.) -
The container may use a client proxy when creating beans with circular dependencies. This is only necessary when the circular dependencies are initialized via a managed bean constructor or producer method parameter. (Beans with scope
@Dependent
never have circular dependencies.) -
Finally, client proxies may be passivated, even when the bean itself may not be. Therefore the container must use a client proxy whenever a bean with normal scope is injected into a bean with a passivating scope, as defined in Passivation and passivating scopes. (On the other hand, beans with scope
@Dependent
must be serialized along with their client.)
Client proxies are never required for a bean whose scope is a pseudo-scope such as @Dependent
.
Client proxies may be shared between multiple injection points. For example, a particular container might instantiate exactly one client proxy object per bean. (However, this strategy is not required by this specification.)
5.4.1. Client proxy invocation
Every time a method of the bean is invoked upon a client proxy, the client proxy must:
-
obtain a contextual instance of the bean, as defined in Contextual instance of a bean, and
-
invoke the method upon this instance.
If the scope is not active, as specified in The active context object for a scope, the client proxy rethrows the ContextNotActiveException
or IllegalStateException
.
The behavior of all methods declared by java.lang.Object
, except for toString()
, is undefined for a client proxy.
Portable applications should not invoke any method declared by java.lang.Object
, except for toString()
, on a client proxy.
5.5. Dependency injection
From time to time the container instantiates beans and other class supporting injection. The resulting instance may or may not be a contextual instance as defined by Contextual instance of a bean.
The container is required to perform dependency injection whenever it creates the following contextual objects:
-
contextual instances of managed beans.
The container is also required to perform dependency injection whenever it instantiates the following non-contextual objects:
-
non-contextual instances of managed beans.
The container interacts with instances of beans or objects supporting injection by calling methods and getting and setting field values.
The object injected by the container may not be a direct reference to a contextual instance of the bean. Instead, it is an injectable reference, as defined by Injectable references.
5.5.1. Injection using the bean constructor
When the container instantiates a managed bean with a constructor annotated @Inject
, the container calls this constructor, passing an injectable reference to each parameter.
If there is no constructor annotated @Inject
, the container calls the constructor with no parameters.
5.5.2. Injection of fields and initializer methods
When the container creates a new instance of a managed bean, the container must:
-
Initialize the values of all injected fields. The container sets the value of each injected field to an injectable reference.
-
Call all initializer methods, passing an injectable reference to each parameter.
The container must ensure that:
-
Initializer methods declared by a class X in the type hierarchy of the bean are called after all injected fields declared by X or by superclasses of X have been initialized.
-
Any
@PostConstruct
callback declared by a class X in the type hierarchy of the bean is called after all initializer methods declared by X or by superclasses of X have been called, after all injected fields declared by X or by superclasses of X have been initialized.
5.5.3. Destruction of dependent objects
When the container destroys an instance of a bean, the container destroys all dependent objects, as defined in Destruction of objects with scope @Dependent
, after the @PreDestroy
callback completes.
5.5.4. Invocation of producer or disposer methods
When the container calls a producer or disposer method, the behavior depends upon whether the method is static or non-static:
-
If the method is static, the container must invoke the method.
-
Otherwise, if the method is non-static, the container must:
-
Obtain a contextual instance of the bean which declares the method, as defined by Contextual instance of a bean.
-
Invoke the method upon this instance, as a business method invocation, as defined in Container invocations and interception.
The container passes an injectable reference to each injected method parameter.
The container is also responsible for destroying dependent objects created during this invocation, as defined in Destruction of objects with scope @Dependent
.
5.5.5. Access to producer field values
When the container accesses the value of a producer field, the value depends upon whether the field is static or non-static:
-
If the producer field is static, the container must access the field value.
-
Otherwise, if the producer field is non-static, the container must:
-
Obtain an contextual instance of the bean which declares the producer field, as defined by Contextual instance of a bean.
-
Access the field value of this instance.
5.5.6. Invocation of observer methods
When the container calls an observer method (defined in Observer methods), the behavior depends upon whether the method is static or non-static:
-
If the observer method is static, the container must invoke the method.
-
Otherwise, if the observer method is non-static, the container must:
-
Obtain a contextual instance of the bean which declares the observer method according to Contextual instance of a bean. If this observer method is a conditional observer method, obtain the contextual instance that already exists, only if the scope of the bean that declares the observer method is currently active, without creating a new contextual instance.
-
Invoke the observer method on the resulting instance, if any, as a business method invocation, as defined in Container invocations and interception.
The container must pass the event object to the event parameter and an injectable instance to each injected method parameter.
The container is also responsible for destroying dependent objects created during this invocation, as defined in Destruction of objects with scope @Dependent
.
5.5.7. Injection point metadata
The interface javax.enterprise.inject.spi.InjectionPoint
provides access to metadata about an injection point.
An instance of InjectionPoint
may represent:
-
an injected field or a parameter of a bean constructor, initializer method, producer method, disposer method or observer method, or
-
an instance obtained dynamically using
Instance.get()
.
public interface InjectionPoint {
public Type getType();
public Set<Annotation> getQualifiers();
public Bean<?> getBean();
public Member getMember();
public Annotated getAnnotated();
public boolean isDelegate();
public boolean isTransient();
}
-
The
getBean()
method returns theBean
object representing the bean that defines the injection point. If the injection point does not belong to a bean,getBean()
returns a null value. If the injection point represents a dynamically obtained instance, thegetBean()
method should return theBean
object representing the bean that defines theInstance
injection point. -
The
getType()
andgetQualifiers()
methods return the required type and required qualifiers of the injection point. If the injection point represents a dynamically obtained instance, thegetType()
andgetQualifiers()
methods should return the required type (as defined byInstance.select()
), and required qualifiers of the injection point including any additional required qualifiers (as defined byInstance.select()
). -
The
getMember()
method returns theField
object in the case of field injection, theMethod
object in the case of method parameter injection, or theConstructor
object in the case of constructor parameter injection. If the injection point represents a dynamically obtained instance, thegetMember()
method returns theField
object representing the field that defines theInstance
injection point in the case of field injection, theMethod
object representing the method that defines theInstance
injection point in the case of method parameter injection, or theConstructor
object representing the constructor that defines theInstance
injection point in the case of constructor parameter injection. -
The
getAnnotated()
method returns an instance ofjavax.enterprise.inject.spi.AnnotatedField
orjavax.enterprise.inject.spi.AnnotatedParameter
, depending upon whether the injection point is an injected field or a constructor/method parameter. If the injection point represents a dynamically obtained instance, then thegetAnnotated()
method returns an instance ofjavax.enterprise.inject.spi.AnnotatedField
orjavax.enterprise.inject.spi.AnnotatedParameter
representing theInstance
injection point, depending upon whether the injection point is an injected field or a constructor/method parameter. -
The
isDelegate()
method returnstrue
if the injection point is a decorator delegate injection point, andfalse
otherwise. If the injection point represents a dynamically obtained instance thenisDelegate()
returns false. -
The
isTransient()
method returnstrue
if the injection point is a transient field, andfalse
otherwise. If the injection point represents a dynamically obtained instance then theisTransient()
method returnstrue
if theInstance
injection point is a transient field, andfalse
otherwise. If this injection point is declared as transient, after bean’s passivation, the value will not be restored. Instance<> injection point is the preferred approach.
Occasionally, a bean with scope @Dependent
needs to access metadata relating to the object into which it is injected.
For example, the following producer method creates injectable Logger
s.
The log category of a Logger
depends upon the class of the object into which it is injected:
@Produces Logger createLogger(InjectionPoint injectionPoint) {
return Logger.getLogger( injectionPoint.getMember().getDeclaringClass().getName() );
}
The container must provide a bean with scope @Dependent
, bean type InjectionPoint
and qualifier @Default
, allowing dependent objects, as defined in Dependent objects, to obtain information about the injection point to which they belong.
The built-in implementation must be a passivation capable dependency, as defined in Passivation capable dependencies.
If a bean that declares any scope other than @Dependent
has an injection point of type InjectionPoint
and qualifier @Default
, the container automatically detects the problem and treats it as a definition error.
If a disposer method has an injection point of type InjectionPoint
and qualifier Default
, the container automatically detects the problem and treats it as a definition error.
If a class supporting injection that is not a bean has an injection point of type InjectionPoint
and qualifier @Default
, the container automatically detects the problem and treats it as a definition error.
5.5.8. Bean metadata
The interfaces Bean
, Interceptor
and Decorator
provide metadata about a bean.
The container must provide beans allowing a bean instance to obtain a Bean
, Interceptor
or Decorator
instance containing its metadata:
-
a bean with scope
@Dependent
, qualifier@Default
and typeBean
which can be injected into any bean instance -
a bean with scope
@Dependent
, qualifier@Default
and typeInterceptor
which can be injected into any interceptor instance -
a bean with scope
@Dependent
, qualifier@Default
and typeDecorator
which can be injected into any decorator instance
Additionally, the container must provide beans allowing interceptors and decorators to obtain information about the beans they intercept and decorate:
-
a bean with scope
@Dependent
, qualifier@Intercepted
and typeBean
which can be injected into any interceptor instance, and -
a bean with scope
@Dependent
, qualifier@Decorated
and typeBean
which can be injected into any decorator instance.
These beans are passivation capable dependencies, as defined in Passivation capable dependencies.
If an Interceptor
instance is injected into a bean instance other than an interceptor instance, the container automatically detects the problem and treats it as a definition error.
If a Decorator
instance is injected into a bean instance other than a decorator instance, the container automatically detects the problem and treats it as a definition error.
If a Bean
instance with qualifier @Intercepted
is injected into a bean instance other than an interceptor instance, the container automatically detects the problem and treats it as a definition error.
If a Bean
instance with qualifier @Decorated
is injected into a bean instance other than a decorator instance, the container automatically detects the problem and treats it as a definition error.
The injection of bean metadata is restricted. If:
-
the injection point is a field, an initializer method parameter or a bean constructor, with qualifier
@Default
, then the type parameter of the injectedBean
,Interceptor
orDecorator
must be the same as the type declaring the injection point, or -
the injection point is a field, an initializer method parameter or a bean constructor of an interceptor, with qualifier
@Intercepted
, then the type parameter of the injectedBean
must be an unbounded wildcard, or -
the injection point is a field, an initializer method parameter or a bean constructor of a decorator, with qualifier
@Decorated
, then the type parameter of the injectedBean
must be the same as the delegate type, or -
the injection point is a producer method parameter then the type parameter of the injected
Bean
must be the same as the producer method return type, or -
the injection point is a parameter of a disposer method then the container automatically detects the problem and treats it as a definition error.
Otherwise, the container automatically detects the problem and treats it as a definition error.
@Named("Order") public class OrderProcessor {
@Inject Bean<OrderProcessor> bean;
public void getBeanName() {
return bean.getName();
}
}
5.6. Programmatic lookup
In certain situations, injection is not the most convenient way to obtain a contextual reference. For example, it may not be used when:
-
the bean type or qualifiers vary dynamically at runtime, or
-
depending upon the deployment, there may be no bean which satisfies the type and qualifiers, or
-
we would like to iterate over all beans of a certain type.
In these situations, an instance of the javax.enterprise.inject.Instance
interface may be injected:
@Inject Instance<PaymentProcessor> paymentProcessor;
The method get()
returns a contextual reference:
PaymentProcessor pp = paymentProcessor.get();
Any combination of qualifiers may be specified at the injection point:
@Inject @PayBy(CHEQUE) Instance<PaymentProcessor> chequePaymentProcessor;
Or, the @Any
qualifier may be used, allowing the application to specify qualifiers dynamically:
@Inject @Any Instance<PaymentProcessor> anyPaymentProcessor;
...
Annotation qualifier = synchronously ? new SynchronousQualifier() : new AsynchronousQualifier();
PaymentProcessor pp = anyPaymentProcessor.select(qualifier).get().process(payment);
In this example, the returned bean has qualifier @Synchronous
or @Asynchronous
depending upon the value of synchronously
.
Finally, the @New
qualifier may be used, allowing the application to obtain a @New
qualified bean, as defined in @New
qualified beans:
@Inject @New(ChequePaymentProcessor.class) Instance<PaymentProcessor> chequePaymentProcessor;
It’s even possible to iterate over a set of beans:
@Inject @Any Instance<PaymentProcessor> anyPaymentProcessor;
...
for (PaymentProcessor pp: anyPaymentProcessor) pp.test();
5.6.1. The Instance
interface
The Instance
interface provides a method for obtaining instances of beans with a specified combination of required type and qualifiers, and inherits the ability to iterate beans with that combination of required type and qualifiers from java.lang.Iterable
:
public interface Instance<T> extends Iterable<T>, Provider<T> {
Instance<T> select(Annotation... qualifiers);
<U extends T> Instance<U> select(Class<U> subtype, Annotation... qualifiers);
<U extends T> Instance<U> select(TypeLiteral<U> subtype, Annotation... qualifiers);
Stream<T> stream();
boolean isUnsatisfied();
boolean isAmbiguous();
boolean isResolvable();
void destroy(T instance);
}
For an injected Instance
:
-
the required type is the type parameter specified at the injection point, and
-
the required qualifiers are the qualifiers specified at the injection point.
For example, this injected Instance
has required type PaymentProcessor
and required qualifier @Any
:
@Inject @Any Instance<PaymentProcessor> anyPaymentProcessor;
The select()
method returns a child Instance
for a given required type and additional required qualifiers.
If no required type is given, the required type is the same as the parent.
Rules specified at The default qualifier at injection points are applied before performing typesafe resolution.
For example, this child Instance
has required type AsynchronousPaymentProcessor
and additional required qualifier @Asynchronous
:
Instance<AsynchronousPaymentProcessor> async = anyPaymentProcessor.select(
AsynchronousPaymentProcessor.class, new AsynchronousQualifier() );
If an injection point of raw type Instance
is defined, the container automatically detects the problem and treats it as a definition error.
If two instances of the same non repeating qualifier type are passed to select()
, an IllegalArgumentException
is thrown.
If an instance of an annotation that is not a qualifier type is passed to select()
, an IllegalArgumentException
is thrown.
The get()
method must:
-
Identify a bean that has the required type and required qualifiers and is eligible for injection into the class into which the parent
Instance
was injected, according to the rules of typesafe resolution, as defined in Performing typesafe resolution, resolving ambiguities according to Unsatisfied and ambiguous dependencies. -
If typesafe resolution results in an unsatisfied dependency, throw an
UnsatisfiedResolutionException
. If typesafe resolution results in an unresolvable ambiguous dependency, throw anAmbiguousResolutionException
. -
Otherwise, obtain a contextual reference for the bean and the required type, as defined in Contextual reference for a bean.
The iterator()
method must:
-
Identify the set of beans that have the required type and required qualifiers and are eligible for injection into the class into which the parent
Instance
was injected, according to the rules of typesafe resolution, as defined in Performing typesafe resolution, resolving ambiguities according to Unsatisfied and ambiguous dependencies. -
Return an
Iterator
, that iterates over the set of contextual references for the resulting beans and required type, as defined in Contextual reference for a bean.
The stream()
method must:
-
Identify the set of beans that have the required type and required qualifiers and are eligible for injection into the class into which the parent
Instance
was injected, according to the rules of typesafe resolution, as defined in Performing typesafe resolution, resolving ambiguities according to Unsatisfied and ambiguous dependencies. -
Return a
Stream
, that can stream over the set of contextual references for the resulting beans and required type, as defined in Contextual reference for a bean.
The methods isUnsatisfied()
, isAmbiguous()
and isResolvable()
must:
-
Identify the set of beans that have the required type and required qualifiers and are eligible for injection into the class into which the parent
Instance
was injected, according to the rules of typesafe resolution, as defined in Performing typesafe resolution, resolving ambiguities according to Unsatisfied and ambiguous dependencies. -
The method
isUnsatisfied()
returnstrue
if there is no bean found, orfalse
otherwise. -
The method
isAmbiguous()
returnstrue
if there is more than one bean found, orfalse
otherwise. -
The method
isResolvable()
returnstrue
if there is exactly one bean found, orfalse
otherwise.
The method destroy()
instructs the container to destroy the instance.
The bean instance passed to destroy()
should be a dependent scoped bean instance obtained from the same Instance
object, or a client proxy for a normal scoped bean.
Applications are encouraged to always call destroy()
when they no longer require an instance obtained from Instance
. All built-in normal scoped contexts support destroying bean instances.
An UnsupportedOperationException
is thrown if the active context object for the scope type of the bean does not support destroying bean instances.
5.6.2. The built-in Instance
The container must provide a built-in bean that:
-
is eligible for injection to any injection point with required type
Instance<X>
orProvider<X>
, for any legal bean typeX
, -
has any qualifiers
-
has scope
@Dependent
, -
has no bean name, and
-
has an implementation provided automatically by the container.
The built-in implementation must be a passivation capable dependency, as defined in Passivation capable dependencies.
5.6.3. Using AnnotationLiteral
and TypeLiteral
javax.enterprise.util.AnnotationLiteral
makes it easier to specify qualifiers when calling select()
:
public PaymentProcessor getSynchronousPaymentProcessor(PaymentMethod paymentMethod) {
class SynchronousQualifier extends AnnotationLiteral<Synchronous>
implements Synchronous {}
class PayByQualifier extends AnnotationLiteral<PayBy>
implements PayBy {
public PaymentMethod value() { return paymentMethod; }
}
return anyPaymentProcessor.select(new SynchronousQualifier(), new PayByQualifier()).get();
}
javax.enterprise.util.TypeLiteral
makes it easier to specify a parameterized type with actual type parameters when calling select()
:
public PaymentProcessor<Cheque> getChequePaymentProcessor() {
PaymentProcessor<Cheque> pp = anyPaymentProcessor
.select( new TypeLiteral<PaymentProcessor<Cheque>>() {} ).get();
}
5.6.4. Built-in annotation literals
The following built-in annotations define a Literal
static nested class to support inline instantiation of the specific annotation type:
-
javax.enterprise.inject.Any
-
javax.enterprise.inject.Default
-
javax.enterprise.inject.New
-
javax.enterprise.inject.Specializes
-
javax.enterprise.inject.Vetoed
-
javax.enterprise.util.Nonbinding
-
javax.enterprise.context.Initialized
-
javax.enterprise.context.Destroyed
-
javax.enterprise.context.RequestScoped
-
javax.enterprise.context.SessionScoped
-
javax.enterprise.context.ApplicationScoped
-
javax.enterprise.context.Dependent
-
javax.enterprise.context.ConversationScoped
-
javax.enterprise.inject.Alternative
-
javax.enterprise.inject.Typed
The Literal
class might be used to instantiate the matching AnnotationLiteral
:
Default defaultLiteral = new Default.Literal();
Annotations without members provide the default AnnotationLiteral
instance declared as a constant named INSTANCE
:
RequestScoped requestScopedLiteral = RequestScoped.Literal.INSTANCE;
Annotations having members do not provide the default AnnotationLiteral
instance. Instead, a constructor or factory method named of
can be used:
Initialized initializedForApplicationScoped = new Initialized.Literal(ApplicationScoped.class);
Initialized initializedForRequestScoped = Initialized.Literal.of(RequestScoped.class);
See also the annotation javadoc for more information about specific Literal
members.
In addition, CDI also provides annotation literals for the following JSR 330 annotations:
-
javax.inject.Inject
withjavax.enterprise.inject.literal.InjectLiteral
class -
javax.inject.Named
withjavax.enterprise.inject.literal.NamedLiteral
class -
javax.inject.Qualifier
withjavax.enterprise.inject.literal.QualifierLiteral
class -
javax.inject.Singleton
withjavax.enterprise.inject.literal.SingletonLiteral
class
They can be used like static nested classes described above.
6. Scopes and contexts
Associated with every scope type is a context object. The context object determines the lifecycle and visibility of instances of all beans with that scope. In particular, the context object defines:
-
When a new instance of any bean with that scope is created
-
When an existing instance of any bean with that scope is destroyed
-
Which injected references refer to any instance of a bean with that scope
The context implementation collaborates with the container via the Context
and Contextual
interfaces to create and destroy contextual instances.
6.1. The Contextual
interface
The interface javax.enterprise.context.spi.Contextual
defines operations to create and destroy contextual instances of a certain type. Any implementation of Contextual
is called a contextual type.
In particular, the Bean
interface defined in The Bean
interface extends Contextual
, so all beans are contextual types.
public interface Contextual<T> {
public T create(CreationalContext<T> creationalContext);
public void destroy(T instance, CreationalContext<T> creationalContext);
}
-
create()
is responsible for creating new contextual instances of the type. -
destroy()
is responsible for destroying instances of the type. In particular, it is responsible for destroying all dependent objects of an instance.
If an exception occurs while creating an instance, the exception is rethrown by the create()
method.
If the exception is a checked exception, it must be wrapped and rethrown as an (unchecked) CreationException
.
If an exception occurs while destroying an instance, the exception must be caught by the destroy()
method.
If the application invokes a contextual instance after it has been destroyed, the behavior is undefined.
The container and portable extensions may define implementations of the Contextual
interface that do not extend Bean
, but it is not recommended that applications directly implement Contextual
.
6.1.1. The CreationalContext
interface
The interface javax.enterprise.context.spi.CreationalContext
provides operations that are used by the Contextual
implementation during instance creation and destruction.
public interface CreationalContext<T> {
public void push(T incompleteInstance);
public void release();
}
-
push()
registers an incompletely initialized contextual instance the with the container. A contextual instance is considered incompletely initialized until it is returned by thecreate()
method. -
release()
destroys all dependent objects, as defined in Dependent objects, of the instance which is being destroyed, by passing each dependent object to thedestroy()
method of itsContextual
object.
The implementation of Contextual
is not required to call push()
. However, for certain bean scopes, invocation of push()
between instantiation and injection helps the container minimize the use of client proxy objects (which would otherwise be required to allow circular dependencies).
If Contextual.create()
calls push()
, it must also return the instance passed to push()
.
Contextual.create()
should use the given CreationalContext
when obtaining contextual references to inject, as defined in Contextual reference for a bean, in order to ensure that any dependent objects are associated with the contextual instance that is being created.
Contextual.destroy()
should call release()
to allow the container to destroy dependent objects of the contextual instance.
6.2. The Context
interface
The javax.enterprise.context.spi.Context
interface provides an operation for obtaining contextual instances with a particular scope of any contextual type. Any instance of Context
is called a context object.
The context object is responsible for creating and destroying contextual instances by calling operations of the Contextual
interface.
The Context
interface is called by the container and may be called by portable extensions.
It should not be called directly by the application.
public interface Context {
public Class<? extends Annotation> getScope();
boolean isActive();
public <T> T get(Contextual<T> bean);
public <T> T get(Contextual<T> bean, CreationalContext<T> creationalContext);
}
public interface AlterableContext extends Context {
public void destroy(Contextual<?> contextual);
}
The method getScope()
returns the scope type of the context object.
A context object may be defined for any of the built-in scopes and registered with the container using the AfterBeanDiscovery
event as described in AfterBeanDiscovery
event.
At a particular point in the execution of the program a context object may be active with respect to the current thread.
When a context object is active the isActive()
method returns true
. Otherwise, we say that the context object is inactive and the isActive()
method returns false
.
The get()
method obtains contextual instances of the contextual type represented by the given instance of Contextual
. The get()
method may either:
-
return an existing instance of the given contextual type, or
-
if no
CreationalContext
is given, return a null value, or -
if a
CreationalContext
is given, create a new instance of the given contextual type by callingContextual.create()
, passing the givenCreationalContext
, and return the new instance.
The get()
method may not return a null value unless no CreationalContext
is given, or Contextual.create()
returns a null value.
The get()
method may not create a new instance of the given contextual type unless a CreationalContext
is given.
The destroy()
method destroys an existing contextual instance, removing it from the context instance.
The AlterableContext
interface was introduced in CDI 1.1 to allow bean instances to be destroyed by the application.
Extensions providing context implementations for normal scopes should implement AlterableContext
instead of Context
.
If the context object is inactive, the get()
and destroy()
methods must throw a ContextNotActiveException
.
When the container calls get()
or destroy()
for a context that is associated with a passivating scope it must ensure that the given instance of Contextual
and the instance of CreationalContext
, if given, are serializable.
The context object is responsible for destroying any contextual instance it creates by passing the instance to the destroy()
method of the Contextual
object representing the contextual type. A destroyed instance must not subsequently be returned by the get()
method.
The context object must pass the same instance of CreationalContext
to Contextual.destroy()
that it passed to Contextual.create()
when it created the instance.
6.3. Normal scopes and pseudo-scopes
Most scopes are normal scopes. The context object for a normal scope type is a mapping from each contextual type with that scope to an instance of that contextual type. There may be no more than one mapped instance per contextual type per thread. The set of all mapped instances of contextual types with a certain scope for a certain thread is called the context for that scope associated with that thread.
A context may be associated with one or more threads. A context with a certain scope is said to propagate from one point in the execution of the program to another when the set of mapped instances of contextual types with that scope is preserved.
The context associated with the current thread is called the current context for the scope. The mapped instance of a contextual type associated with a current context is called the current instance of the contextual type.
The get()
operation of the context object for an active normal scope returns the current instance of the given contextual type.
At certain points in the execution of the program a context may be destroyed.
When a context is destroyed, all mapped instances belonging to that context are destroyed by passing them to the Contextual.destroy()
method.
Contexts with normal scopes must obey the following rule:
Suppose beans A, B and Z all have normal scopes. Suppose A has an injection point x, and B has an injection point y. Suppose further that both x and y resolve to bean Z according to the rules of typesafe resolution. If a is the current instance of A, and b is the current instance of B, then both a.x and b.y refer to the same instance of Z. This instance is the current instance of Z.
Any scope that is not a normal scope is called a pseudo-scope. The concept of a current instance is not well-defined in the case of a pseudo-scope.
All normal scopes must be explicitly declared @NormalScope
, to indicate to the container that a client proxy is required.
All pseudo-scopes must be explicitly declared @Scope
, to indicate to the container that no client proxy is required.
All scopes defined by this specification, except for the @Dependent
pseudo-scope, are normal scopes.
6.4. Dependent pseudo-scope
The @Dependent
scope type is a pseudo-scope. Beans declared with scope type @Dependent
behave differently to beans with other built-in scope types.
When a bean is declared to have @Dependent
scope:
-
No injected instance of the bean is ever shared between multiple injection points.
-
Any instance of the bean injected into an object that is being created by the container is bound to the lifecycle of the newly created object.
-
Any instance of the bean that receives a producer method, producer field, disposer method or observer method invocation exists to service that invocation only.
-
Any instance of the bean injected into method parameters of a disposer method or observer method exists to service the method invocation only (except for observer methods of container lifecycle events).
Every invocation of the get()
operation of the Context
object for the @Dependent
scope with a CreationalContext
returns a new instance of the given bean.
Every invocation of the get()
operation of the Context
object for the @Dependent
scope with no CreationalContext
returns a null value.
The @Dependent
scope is always active.
6.4.1. Dependent objects
Many instances of beans with scope @Dependent
belong to some other bean and are called dependent objects.
-
Instances of decorators and interceptors are dependent objects of the bean instance they decorate.
-
An instance of a bean with scope
@Dependent
injected into a field, bean constructor or initializer method is a dependent object of the bean into which it was injected. -
An instance of a bean with scope
@Dependent
injected into a producer method is a dependent object of the producer method bean instance that is being produced. -
An instance of a bean with scope
@Dependent
obtained by direct invocation of anInstance
is a dependent object of the instance ofInstance
.
6.4.2. Destruction of objects with scope @Dependent
Dependent objects of a contextual instance are destroyed when Contextual.destroy()
calls CreationalContext.release()
, as defined in The CreationalContext
interface.
Additionally, the container must ensure that:
-
all dependent objects of a non-contextual instance of a bean are destroyed when the instance is destroyed by the container,
-
all
@Dependent
scoped contextual instances injected into method parameters of a disposer method or an observer method are destroyed when the invocation completes, -
all
@Dependent
scoped contextual instances injected into method or constructor parameters that are annotated with@TransientReference
are destroyed when the invocation completes, and -
any
@Dependent
scoped contextual instance created to receive a producer method, producer field, disposer method or observer method invocation is destroyed when the invocation completes.
Finally, the container is permitted to destroy any @Dependent
scoped contextual instance at any time if the instance is no longer referenced by the application (excluding weak, soft and phantom references).
6.5. Contextual instances and contextual references
The Context
object is the ultimate source of the contextual instances that underly contextual references.
6.5.1. The active context object for a scope
From time to time, the container must obtain an active context object for a certain scope type. The container must search for an active instance of Context
associated with the scope type.
-
If no active context object exists for the scope type, the container throws a
ContextNotActiveException
. -
If more than one active context object exists for the given scope type, the container must throw an
IllegalStateException
.
If there is exactly one active instance of Context
associated with the scope type, we say that the scope is active.
6.5.2. Activating Built In Contexts
Certain built in contexts support the ability to be activated and deactivated. This allows developers to control built-in contexts in ways that they could also manage custom built contexts.
When activating and deactivating built in contexts, it is important to realize that they can only be activated if not already active within a given thread.
6.5.2.1. Activating a Request Context
Request contexts can be managed either programmatically or via interceptor.
To programmatically manage request contexts, the container provides a built in bean that is @Dependent
scoped and of type RequestContextController
that allows you to activate and deactivate a request context on the current thread. The object should be considered stateful, invoking the same instance on different threads may not work properly, non-portable behavior may occur.
public interface RequestContextController {
boolean activate();
void deactivate() throws ContextNotActiveException;
}
When the activate()
method is called, if the request context is not already active on the current thread then it will be activated and the method returns true
. Otherwise, the method returns false
.
When the deactivate()
method is called, if this controller started the request context then the request context is stopped. The method does nothing if this controller did not activate the context and the context is active. This method throws a ContextNotActiveException
if there is no request context active.
If within the same thread the activate()
and deactivate()
methods are invoked repeatedly, the instances between the activations are not the same instances, each request context should be assumed to be new.
To automatically start a request context via interceptor binding, the container provides an interceptor @ActivateRequestContext
which will activate a request context if not already active prior to the method’s invocation, and deactivate it upon method completion, with the same rules as in RequestContextController
. The interceptor is automatically registered with a priority of PLATFORM_BEFORE + 100
.
6.5.3. Contextual instance of a bean
From time to time, the container must obtain a contextual instance of a bean. The container must:
-
obtain the active context object for the bean scope, then
-
obtain an instance of the bean by calling
Context.get()
, passing theBean
instance representing the bean and an instance ofCreationalContext
.
From time to time, the container attempts to obtain a contextual instance of a bean that already exists, without creating a new contextual instance. The container must determine if the scope of the bean is active and if it is:
-
obtain the active context object for the bean scope, then
-
attempt to obtain an existing instance of the bean by calling
Context.get()
, passing theBean
instance representing the bean without passing any instance ofCreationalContext
.
If the scope is not active, or if Context.get()
returns a null value, there is no contextual instance that already exists.
A contextual instance of any of the built-in kinds of bean defined in Programming model is considered an internal container construct, and it is therefore not strictly required that a contextual instance of a built-in kind of bean directly implement the bean types of the bean. However, in this case, the container is required to transform its internal representation to an object that does implement the bean types expected by the application before injecting or returning a contextual instance to the application.
For a custom implementation of the Bean
interface defined in The Bean
interface, the container calls getScope()
to determine the bean scope.
6.5.4. Contextual reference for a bean
From time to time, the container must obtain a contextual reference for a bean and a given bean type of the bean. A contextual reference implements the given bean type and all bean types of the bean which are Java interfaces. A contextual reference is not, in general, required to implement all concrete bean types of the bean.
Contextual references must be obtained with a given CreationalContext
, allowing any instance of scope @Dependent
that is created to be later destroyed.
-
If the bean has a normal scope and the given bean type cannot be proxied by the container, as defined in Unproxyable bean types, the container throws an
UnproxyableResolutionException
. -
If the bean has a normal scope, then the contextual reference for the bean is a client proxy, as defined in Client proxies, created by the container, that implements the given bean type and all bean types of the bean which are Java interfaces.
-
Otherwise, if the bean has a pseudo-scope, the container must obtain a contextual instance of the bean. If the bean has scope
@Dependent
, the container must associate it with theCreationalContext
.
The container must ensure that every injection point of type InjectionPoint
and qualifier @Default
of any dependent object instantiated during this process receives:
-
an instance of
InjectionPoint
representing the injection point into which the dependent object will be injected, or -
a null value if it is not being injected into any injection point.
6.5.5. Contextual reference validity
A contextual reference for a bean is valid only for a certain period of time. The application should not invoke a method of an invalid reference.
The validity of a contextual reference for a bean depends upon whether the scope of the bean is a normal scope or a pseudo-scope.
-
Any reference to a bean with a normal scope is valid as long as the application maintains a hard reference to it. However, it may only be invoked when the context associated with the normal scope is active. If it is invoked when the context is inactive, a
ContextNotActiveException
is thrown by the container. -
Any reference to a bean with a normal scope is invalid after CDI container shutdown. Maintaining such reference and attempting to use it after container shutdown results in an
IllegalStateException
. -
Any reference to a bean with a pseudo-scope (such as
@Dependent
) is valid until the bean instance to which it refers is destroyed. It may be invoked even if the context associated with the pseudo-scope is not active. If the application invokes a method of a reference to an instance that has already been destroyed, the behavior is undefined.
6.5.6. Injectable references
From time to time, the container must obtain an injectable reference for an injection point. The container must:
-
Identify a bean according to the rules defined in Typesafe resolution and resolving ambiguities according to Unsatisfied and ambiguous dependencies.
-
Obtain a contextual reference for this bean and the type of the injection point according to Contextual reference for a bean.
For certain combinations of scopes, the container is permitted to optimize the above procedure:
-
The container is permitted to directly inject a contextual instance of the bean, as defined in Contextual instance of a bean.
-
If an incompletely initialized instance of the bean is registered with the current
CreationalContext
, as defined in TheContextual
interface, the container is permitted to directly inject this instance.
However, in performing these optimizations, the container must respect the rules of injectable reference validity.
6.5.7. Injectable reference validity
Injectable references to a bean must respect the rules of contextual reference validity, with the following exceptions:
-
A reference to a bean injected into a field, bean constructor or initializer method is only valid until the object into which it was injected is destroyed.
-
A reference to a bean injected into a producer method is only valid until the producer method bean instance that is being produced is destroyed.
-
A reference to a bean injected into a disposer method or observer method is only valid until the invocation of the method completes.
The application should not invoke a method of an invalid injected reference. If the application invokes a method of an invalid injected reference, the behavior is undefined.
6.6. Passivation and passivating scopes
The temporary transfer of the state of an idle object held in memory to some form of secondary storage is called passivation. The transfer of the passivated state back into memory is called activation.
6.6.1. Passivation capable beans
A bean is called passivation capable if the container is able to temporarily transfer the state of any idle instance to secondary storage.
-
A managed bean is passivation capable if and only if the bean class is serializable and all interceptors and decorators of the bean are passivation capable.
-
A producer method is passivation capable if and only if it never returns a value which is not passivation capable at runtime.
-
A producer field is passivation capable if and only if it never refers to a value which is not passivation capable at runtime.
A custom implementation of Bean
is passivation capable if it implements the interface PassivationCapable
. An implementation of Contextual
that is not a bean is passivation capable if it implements both PassivationCapable
and Serializable
.
public interface PassivationCapable {
public String getId();
}
The getId()
method must return a value that uniquely identifies the instance of Bean
or Contextual
. It is recommended that the string contain the package name of the class that implements Bean
or Contextual
.
6.6.2. Passivation capable injection points
We call an injection point of a bean passivation capable if the injection point is:
-
a transient field, or
-
a non-transient field which resolves to a bean that is a passivation capable dependency, or
-
a bean constructor parameter which is annotated with
@TransientReference
, or -
a bean constructor parameter which resolves to a bean that is a passivation capable dependency, or
-
a method parameter which is annotated with
@TransientReference
, or -
a method parameter which resolves to a bean that is a passivation capable dependency.
6.6.3. Passivation capable dependencies
A bean is called a passivation capable dependency if any contextual reference for that bean is preserved when the object holding the reference is passivated and then activated.
The container must guarantee that:
-
all beans with normal scope are passivation capable dependencies,
-
all passivation capable beans with scope
@Dependent
are passivation capable dependencies, -
the built-in beans of type
Instance
,Event
,InjectionPoint
andBeanManager
are passivation capable dependencies.
A custom implementation of Bean
is a passivation capable dependency if it implements PassivationCapable
.
6.6.4. Passivating scopes
A passivating scope requires that:
-
beans with the scope are passivation capable, and
-
implementations of
Contextual
passed to any context object for the scope are passivation capable.
Passivating scopes must be explicitly declared @NormalScope(passivating=true)
.
For example, the built-in session and conversation scopes defined in Context management for built-in scopes are passivating scopes. No other built-in scopes are passivating scopes.
6.6.5. Validation of passivation capable beans and dependencies
For every bean which declares a passivating scope, the container must validate that the bean truly is passivation capable and that, in addition, its dependencies are passivation capable.
If a managed bean which declares a passivating scope, or a built-in bean:
-
is not passivation capable,
-
has an injection point that is not passivation capable,
-
has an interceptor or decorator that is not passivation capable
-
has an interceptor or decorator with an injection point that is not passivation capable
then the container automatically detects the problem and treats it as a deployment problem.
If a producer method declares a passivating scope and:
-
has a return type that is declared final and does not implement or extend
Serializable
, or, -
has an injection point that is not passivation capable
then the container automatically detects the problem and treats it as a deployment problem.
If a producer method declares a passivating scope and doesn’t only return Serializable
types at runtime, then the container must throw an IllegalProductException
.
If a producer field declares a passivating scope and has a type that is declared final and does not implement or extend Serializable
then the container automatically detects the problem and treats it as a deployment problem.
If a producer field declares a passivating scope and doesn’t only contain Serializable
values at runtime then the container must throw an IllegalProductException
.
If a producer method or field of scope @Dependent
returns an unserializable object for injection into an injection point that requires a passivation capable dependency, the container must throw an IllegalProductException
For a custom implementation of Bean
, the container calls getInjectionPoints()
to determine the injection points, and InjectionPoint.isTransient()
to determine whether the injection point is a transient field.
If a managed bean which declares a passivating scope type, has a decorator or interceptor which is not a passivation capable dependency, the container automatically detects the problem and treats it as a deployment problem.
6.7. Context management for built-in scopes
The container must provide an implementation of the Context
interface for each of the built-in scopes defined in Built-in scope types.
These implementations depend on the platform the container is running.
A portable extension may define a custom context object for any or all of the built-in scopes. For example, a remoting framework might provide a request context object for the built-in request scope.
The context associated with a built-in normal scope propagates across local, synchronous Java method calls. The context does not propagate across remote method invocations or to asynchronous processes.
Portable extensions are encouraged to synchronously fire:
-
an event with qualifier
@Initialized(X.class)
when a custom context is initialized, i.e. ready for use, -
an event with qualifier
@BeforeDestroyed(X.class)
when a custom context is about to be destroyed, i.e. before the actual destruction, -
an event with qualifier
@Destroyed(X.class)
when a custom context is destroyed, i.e. after the actual destruction,
where X
is the scope type associated with the context.
A suitable event payload should be chosen.
6.7.1. Request context lifecycle
The request context is provided by a built-in context object for the built-in scope type @RequestScoped
.
An event with qualifier @Initialized(RequestScoped.class)
is synchronously fired when the request context is initialized.
An event with qualifier @BeforeDestroyed(RequestScoped.class)
is synchronously fired when the request context is about to be destroyed, i.e. before the actual destruction.
An event with qualifier @Destroyed(RequestScoped.class)
is synchronously fired when the request context is destroyed, i.e. after the actual destruction.
The request context is active:
-
during notification of an asynchronous observer method, and
-
during
@PostConstruct
callback of any bean.
The request context is destroyed:
-
after the invocation of an asynchronous observer method completes, and
-
after the
@PostConstruct
callback completes, if it did not already exist when the@PostConstruct
callback occurred.
6.7.2. Session context lifecycle
The session context is provided by a built-in context object for the built-in passivating scope type @SessionScoped
.
6.7.3. Application context lifecycle
The application context is provided by a built-in context object for the built-in scope type @ApplicationScoped
.
An event with qualifier @Initialized(ApplicationScoped.class)
is synchronously fired when the application context is initialized.
An event with qualifier @BeforeDestroyed(ApplicationScoped.class)
is synchronously fired when the application context is about to be destroyed, i.e. before the actual destruction.
An event with qualifier @Destroyed(ApplicationScoped.class)
is synchronously fired when the application context is destroyed, i.e. after the actual destruction.
6.7.4. Conversation context lifecycle
The conversation context is provided by a built-in context object for the built-in passivating scope type @ConversationScoped
.
6.7.5. The Conversation
interface
The container provides a built-in bean with bean type Conversation
, scope @RequestScoped
, and qualifier @Default
, named javax.enterprise.context.conversation
.
public interface Conversation {
public void begin();
public void begin(String id);
public void end();
public String getId();
public long getTimeout();
public void setTimeout(long milliseconds);
public boolean isTransient();
}
-
begin()
marks the current transient conversation long-running. A conversation identifier may, optionally, be specified. If no conversation identifier is specified, an identifier is generated by the container. -
end()
marks the current long-running conversation transient. -
getId()
returns the identifier of the current long-running conversation, or a null value if the current conversation is transient. -
getTimeout()
returns the timeout, in milliseconds, of the current conversation. -
setTimeout()
sets the timeout of the current conversation. -
isTransient()
returnstrue
if the conversation is marked transient, orfalse
if it is marked long-running.
If any method of Conversation
is called when the conversation scope is not active, a ContextNotActiveException
is thrown.
If end()
is called, and the current conversation is marked transient, an IllegalStateException
is thrown.
If begin()
is called, and the current conversation is already marked long-running, an IllegalStateException
is thrown.
If begin()
is called with an explicit conversation identifier, and a long-running conversation with that identifier already exists, an IllegalArgumentException
is thrown.
7. Lifecycle of contextual instances
The lifecycle of a contextual instance of a bean is managed by the context object for the bean’s scope, as defined in Scopes and contexts.
Every bean in the system is represented by an instance of the Bean
interface defined in The Bean
interface.
This interface is a subtype of Contextual
. To create and destroy contextual instances, the context object calls the create()
and destroy()
operations defined by the interface Contextual
, as defined in The Contextual
interface.
7.1. Restriction upon bean instantiation
There are very few programming restrictions upon the bean class of a bean. In particular, the class is a concrete class and is not required to implement any special interface or extend any special superclass. Therefore, bean classes are easy to instantiate and unit test.
However, if the application directly instantiates a bean class, instead of letting the container perform instantiation, the resulting instance is not managed by the container and is not a contextual instance as defined by Contextual instance of a bean. Furthermore, the capabilities listed in Functionality provided by the container to the bean will not be available to that particular instance. In a deployed application, it is the container that is responsible for instantiating beans and initializing their dependencies.
If the application requires more control over instantiation of a contextual instance, a producer method or field may be used. Any Java object may be returned by a producer method or field. It is not required that the returned object be a contextual reference for a bean. However, if the object is not a contextual reference for another bean, the object will be contextual instance of the producer method bean, and therefore available for injection into other objects and use in name resolution, but the other capabilities listed in Functionality provided by the container to the bean will not be available to the object.
In the following example, a producer method returns instances of other beans:
@SessionScoped
public class PaymentStrategyProducer implements Serializable {
private PaymentStrategyType paymentStrategyType;
public void setPaymentStrategyType(PaymentStrategyType type) {
paymentStrategyType = type;
}
@Produces PaymentStrategy getPaymentStrategy(@CreditCard PaymentStrategy creditCard,
@Cheque PaymentStrategy cheque,
@Online PaymentStrategy online) {
switch (paymentStrategyType) {
case CREDIT_CARD: return creditCard;
case CHEQUE: return cheque;
case ONLINE: return online;
default: throw new IllegalStateException();
}
}
}
In this case, any object returned by the producer method has already had its dependencies injected, receives lifecycle callbacks and event notifications and may have interceptors.
But in this example, the returned objects are not contextual instances:
@SessionScoped
public class PaymentStrategyProducer implements Serializable {
private PaymentStrategyType paymentStrategyType;
public void setPaymentStrategyType(PaymentStrategyType type) {
paymentStrategyType = type;
}
@Produces PaymentStrategy getPaymentStrategy() {
switch (paymentStrategyType) {
case CREDIT_CARD: return new CreditCardPaymentStrategy();
case CHEQUE: return new ChequePaymentStrategy();
case ONLINE: return new OnlinePaymentStrategy();
default: throw new IllegalStateException();
}
}
}
In this case, any object returned by the producer method will not have any dependencies injected by the container, receives no lifecycle callbacks or event notifications and does not have interceptors or decorators.
7.2. Container invocations and interception
When the application invokes:
-
a method of a bean via a contextual reference to the bean, as defined in Contextual reference for a bean,
-
a method of a bean via a non-contextual reference to the bean, if the instance was created by the container (e.g. using
InjectionTarget.produce()
orUnmanagedInstance.produce()
), or -
a method of a bean via a non-contextual reference to the bean, if the instance was enhanced with the
InterceptionFactory
interface as defined in TheInterceptionFactory
interface,
the invocation is treated as a business method invocation.
When the container invokes a method of a bean, the invocation may or may not be treated as a business method invocation:
-
Invocations of initializer methods by the container are not business method invocations.
-
Invocations of producer, disposer and observer methods by the container are business method invocations and are intercepted by method interceptors and decorators.
-
Invocation of lifecycle callbacks by the container are not business method invocations, but are intercepted by interceptors for lifecycle callbacks.
-
Invocations of interceptors and decorator methods during method or lifecycle callback interception are not business method invocations, and therefore no recursive interception occurs.
-
Invocations of methods declared by java.lang.Object are not business method invocations.
A method invocation passes through method interceptors and decorators if, and only if, it is a business method invocation.
Otherwise, the invocation is treated as a normal Java method call and is not intercepted by the container.
7.3. Lifecycle of contextual instances
The actual mechanics of bean creation and destruction varies according to what kind of bean is being created or destroyed.
7.3.1. Lifecycle of managed beans
When the create()
method of the Bean
object that represents a managed bean is called, the container obtains an instance of the bean, as defined by the Managed Beans specification, calling the bean constructor as defined by Injection using the bean constructor, and performing dependency injection as defined in Injection of fields and initializer methods.
When the destroy()
method is called, the container destroys the instance, as defined by the Managed Beans specification, and any dependent objects, as defined in Destruction of dependent objects.
7.3.2. Lifecycle of producer methods
When the create()
method of a Bean
object that represents a producer method is called, the container must invoke the producer method as defined by Invocation of producer or disposer methods.
The return value of the producer method, after method interception completes, is the new contextual instance to be returned by Bean.create()
.
If the producer method returns a null value and the producer method bean has the scope @Dependent
, the create()
method returns a null value.
Otherwise, if the producer method returns a null value, and the scope of the producer method is not @Dependent
, the create()
method throws an IllegalProductException
.
When the destroy()
method is called, and if there is a disposer method for this producer method, the container must invoke the disposer method as defined by Invocation of producer or disposer methods, passing the instance given to destroy()
to the disposed parameter.
Finally, the container destroys dependent objects, as defined in Destruction of dependent objects.
7.3.3. Lifecycle of producer fields
When the create()
method of a Bean
object that represents a producer field is called, the container must access the producer field as defined by Access to producer field values to obtain the current value of the field.
The value of the producer field is the new contextual instance to be returned by Bean.create()
.
If the producer field contains a null value and the producer field bean has the scope @Dependent
, the create()
method returns a null value.
Otherwise, if the producer field contains a null value, and the scope of the producer field is not @Dependent
, the create()
method throws an IllegalProductException
.
When the destroy()
method is called, and if there is a disposer method for this producer field, the container must invoke the disposer method as defined by Invocation of producer or disposer methods, passing the instance given to destroy()
to the disposed parameter.
8. Decorators
A decorator implements one or more bean types and intercepts business method invocations of beans which implement those bean types. These bean types are called decorated types.
Decorators are superficially similar to interceptors, but because they directly implement operations with business semantics, they are able to implement business logic and, conversely, unable to implement the cross-cutting concerns for which interceptors are optimized.
Decorators may be associated with any managed bean that is not itself an interceptor or decorator, or with any built-in bean other than the built-in bean with type BeanManager
and qualifier @Default
.
Decorators are not automatically applied to the return value of a producer method or the current value of a producer field.
A decorator instance is a dependent object of the object it decorates.
8.1. Decorator beans
A decorator is a managed bean.
The set of decorated types of a decorator includes all bean types of the managed bean which are Java interfaces, except for java.io.Serializable
. The decorator bean class and its superclasses are not decorated types of the decorator.
The decorator class may be abstract.
If the set of decorated types of a decorator is empty, the container automatically detects the problem and treats it as a definition error.
If a decorator declares any scope other than @Dependent
, the container automatically detects the problem and treats it as a definition error.
8.1.1. Declaring a decorator
A decorator is declared by annotating the bean class with the @javax.decorator.Decorator
stereotype.
@Decorator @Priority(javax.interceptor.Interceptor.Priority.APPLICATION)
class TimestampLogger implements Logger { ... }
8.1.2. Decorator delegate injection points
All decorators have a delegate injection point. A delegate injection point is an injection point of the bean class. The type and qualifiers of the injection point are called the delegate type and delegate qualifiers. The decorator applies to beans that are assignable to the delegate injection point.
The delegate injection point must be declared by annotating the injection point with the annotation @javax.decorator.Delegate
:
@Decorator @Priority(javax.interceptor.Interceptor.Priority.APPLICATION)
class TimestampLogger implements Logger {
@Inject @Delegate @Any Logger logger;
...
}
@Decorator @Priority(javax.interceptor.Interceptor.Priority.APPLICATION)
class TimestampLogger implements Logger {
private Logger logger;
@Inject
public TimestampLogger(@Delegate @Debug Logger logger) {
this.logger=logger;
}
...
}
A decorator must have exactly one delegate injection point. If a decorator has more than one delegate injection point, or does not have a delegate injection point, the container automatically detects the problem and treats it as a definition error.
The delegate injection point must be an injected field, initializer method parameter or bean constructor method parameter.
If an injection point that is not an injected field, initializer method parameter or bean constructor method parameter is annotated @Delegate
, the container automatically detects the problem and treats it as a definition error.
If a bean class that is not a decorator has an injection point annotated @Delegate
, the container automatically detects the problem and treats it as a definition error.
The container must inject a delegate object to the delegate injection point. The delegate object implements the delegate type and delegates method invocations to remaining uninvoked decorators and eventually to the bean. When the container calls a decorator during business method interception, the decorator may invoke any method of the delegate object.
@Decorator @Priority(javax.interceptor.Interceptor.Priority.APPLICATION)
class TimestampLogger implements Logger {
@Inject @Delegate @Any Logger logger;
void log(String message) {
logger.log( timestamp() + ": " + message );
}
...
}
If a decorator invokes the delegate object at any other time, the invoked method throws an IllegalStateException
.
8.1.3. Decorated types of a decorator
The delegate type of a decorator must implement or extend every decorated type (with exactly the same type parameters). If the delegate type does not implement or extend a decorated type of the decorator (or specifies different type parameters), the container automatically detects the problem and treats it as a definition error.
A decorator is not required to implement the delegate type.
A decorator may be an abstract Java class, and is not required to implement every method of every decorated type. Whenever the decorator does not implement a method of the decorated type, the container will provide an implicit implementation that calls the method on the delegate. If a decorator has abstract methods that are not declared by a decorated type, the container automatically detects the problem and treats it as a definition error.
The decorator intercepts every method which is declared by a decorated type of the decorator and is implemented by the bean class of the decorator.
8.2. Decorator enablement and ordering
This specification defines two methods of enabling and ordering decorators.
From Contexts and Dependency Injection 1.1 onwards the @Priority
annotation allows a decorator to be enabled and ordered for an entire application.
Contexts and Dependency Injection 1.0 allowed only for a decorator to be enabled and ordered for a bean archive.
Decorators are called after interceptors.
Decorators enabled using @Priority
are called before decorators enabled using beans.xml
.
A decorator is said to be enabled if it is enabled in at least one bean archive or is listed in the final list of decorators for the application, as defined in AfterTypeDiscovery
event.
If a decorator is enabled for the application and for the bean archive, then the enablement from the bean archive is ignored by the container. The decorator will only be executed once based on the @Priority
annotation’s invocation chain.
8.2.1. Decorator enablement and ordering for an application
A decorator may be enabled for the entire application by applying the @Priority
annotation, along with a priority value, on the decorator class.
Decorators with the smaller priority values are called first.
The order of more than one decorator with the same priority is undefined.
@Decorator @Priority(javax.interceptor.Interceptor.Priority.APPLICATION)
class TimestampLogger implements Logger {
...
}
The priority value ranges defined in the Java Interceptors specification section 5.5 should be used when defining decorator priorities.
8.2.2. Decorator enablement and ordering for a bean archive
A decorator may be explicitly enabled by listing its bean class under the <decorators>
element of the beans.xml
file of the bean archive.
<beans xmlns="http://xmlns.jcp.org/xml/ns/javaee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://xmlns.jcp.org/xml/ns/javaee http://xmlns.jcp.org/xml/ns/javaee/beans_2_0.xsd" bean-discovery-mode="all" version="2.0">
<decorators>
<class>com.acme.myfwk.TimestampLogger</class>
<class>com.acme.myfwk.IdentityLogger</class>
</decorators>
</beans>
The order of the decorator declarations determines the decorator ordering. Decorators which occur earlier in the list are called first.
Each child <class>
element must specify the name of a decorator bean class.
If there is no class with the specified name, or if the class with the specified name is not a decorator bean class, the container automatically detects the problem and treats it as a deployment problem.
If the same class is listed twice under the <decorators>
element, the container automatically detects the problem and treats it as a deployment problem.
8.3. Decorator resolution
The process of matching decorators to a certain bean is called decorator resolution. A decorator is bound to a bean if:
-
The bean is assignable to the delegate injection point according to the rules defined in Typesafe resolution (using Assignability of raw and parameterized types for delegate injection points).
-
The decorator is enabled in the bean archive containing the bean.
If a decorator matches a managed bean, the managed bean class must be a proxyable bean type, as defined in Unproxyable bean types.
For a custom implementation of the Decorator
interface defined in The Decorator
interface, the container calls getDelegateType()
, getDelegateQualifiers()
and getDecoratedTypes()
to determine the delegate type and qualifiers and decorated types of the decorator.
A custom implementation of the Decorator
interface may implement the Prioritized
interface to be enabled for the entire application with a priority value.
8.3.1. Assignability of raw and parameterized types for delegate injection points
Decorator delegate injection points have a special set of rules for determining assignability of raw and parameterized types, as an exception to Assignability of raw and parameterized types.
A raw bean type is considered assignable to a parameterized delegate type if the raw types are identical and all type parameters of the delegate type are either unbounded type variables or java.lang.Object
.
A parameterized bean type is considered assignable to a parameterized delegate type if they have identical raw type and for each parameter:
-
the delegate type parameter and the bean type parameter are actual types with identical raw type, and, if the type is parameterized, the bean type parameter is assignable to the delegate type parameter according to these rules, or
-
the delegate type parameter is a wildcard, the bean type parameter is an actual type and the actual type is assignable to the upper bound, if any, of the wildcard and assignable from the lower bound, if any, of the wildcard, or
-
the delegate type parameter is a wildcard, the bean type parameter is a type variable and the upper bound of the type variable is assignable to the upper bound, if any, of the wildcard and assignable from the lower bound, if any, of the wildcard, or
-
the delegate type parameter and the bean type parameter are both type variables and the upper bound of the bean type parameter is assignable to the upper bound, if any, of the delegate type parameter, or
-
the delegate type parameter is a type variable, the bean type parameter is an actual type, and the actual type is assignable to the upper bound, if any, of the type variable.
8.4. Decorator invocation
Whenever a business method is invoked on an instance of a bean with decorators, the container intercepts the business method invocation and, after processing all interceptors of the method, invokes decorators of the bean.
The container searches for the first decorator of the instance that implements the method that is being invoked as a business method. If no such decorator exists, the container invokes the business method of the intercepted instance. Otherwise, the container calls the method of the decorator.
When any decorator is invoked by the container, it may in turn invoke a method of the delegate. The container intercepts the delegate invocation and searches for the first decorator of the instance such that:
-
the decorator occurs after the decorator invoking the delegate, and
-
the decorator implements the method that is being invoked upon the delegate.
If no such decorator exists, the container invokes the business method of the intercepted instance. Otherwise, the container calls the method of the decorator.
9. Interceptor bindings
Managed beans support interception.
Interceptors are used to separate cross-cutting concerns from business logic.
The Java Interceptors specification defines the basic programming model and semantics, and how to associate interceptors with target classes.
This specification defines various extensions to the Java Interceptors specification, including how to override the interceptor order defined by the @Priority
annotation.
9.1. Interceptor binding types
This specification extends the Java Interceptors specification and allows interceptor bindings to be applied to CDI stereotypes.
9.1.1. Interceptor bindings for stereotypes
Interceptor bindings may be applied to a stereotype by annotating the stereotype annotation:
@Transactional
@Secure
@RequestScoped
@Stereotype
@Target(TYPE)
@Retention(RUNTIME)
public @interface Action {}
An interceptor binding declared by a stereotype is inherited by any bean that declares that stereotype.
If a stereotype declares interceptor bindings, it must be defined as @Target(TYPE)
.
9.2. Declaring the interceptor bindings of an interceptor
This specification extends the Java Interceptors specification and defines how the container must behave if a definition error is encountered.
9.3. Binding an interceptor to a bean
This specification extends the Java Interceptors specification and defines:
-
additional restrictions about the type of bean to which an interceptor can be bound, and
-
how the container must behave if a definition error is encountered, and
-
how interceptors are bound using stereotypes.
Interceptor bindings may be used to associate interceptors with any managed bean that is not a decorator.
The set of interceptor bindings for a method declared at class level includes those declared on stereotypes. An interceptor binding declared on a bean class replaces an interceptor binding of the same type declared by a stereotype that is applied to the bean class.
The set of interceptor bindings for a producer method is not used to associate interceptors with the return value of the producer method.
Since CDI 2.0 it is possible to apply interceptors programmatically to the return value of a producer method, with the InterceptionFactory
interface as defined in The InterceptionFactory
interface.
If a managed bean has a class-level or method-level interceptor binding, the managed bean must be a proxyable bean type, as defined in Unproxyable bean types.
9.4. Interceptor enablement and ordering
This specification extends the Java Interceptors specification and defines:
-
support for enabling interceptors only for a bean archive, as defined by Contexts and Dependency Injection 1.0, and
-
the ability to override the interceptor order using the portable extension SPI, defined in
AfterTypeDiscovery
event.
An interceptor may be explicitly enabled for a bean archive by listing its class under the <interceptors>
element of the beans.xml
file of the bean archive.
<beans xmlns="http://xmlns.jcp.org/xml/ns/javaee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://xmlns.jcp.org/xml/ns/javaee http://xmlns.jcp.org/xml/ns/javaee/beans_2_0.xsd" bean-discovery-mode="all" version="2.0">
<interceptors>
<class>com.acme.myfwk.TransactionInterceptor</class>
<class>com.acme.myfwk.LoggingInterceptor</class>
</interceptors>
</beans>
The order of the interceptor declarations determines the interceptor ordering. Interceptors which occur earlier in the list are called first.
Each child <class>
element must specify the name of an interceptor class.
If there is no class with the specified name, or if the class with the specified name is not an interceptor class, the container automatically detects the problem and treats it as a deployment problem.
If the same class is listed twice under the <interceptors>
element, the container automatically detects the problem and treats it as a deployment problem.
Interceptors enabled using @Priority
are called before interceptors enabled using beans.xml
.
An interceptor is said to be enabled if it is enabled in at least one bean archive or is listed in the final list of interceptors for the application, as defined in AfterTypeDiscovery
event.
If an interceptor declares any scope other than @Dependent
, the container automatically detects the problem and treats it as a definition error.
If an interceptor is enabled for the application and for the bean archive, then the enablement from the bean archive is ignored by the container. The interceptor will only be executed once based on the @Priority
annotation’s invocation chain.
9.5. Interceptor resolution
This specification extends the Java Interceptors specification and defines:
-
the effect of applying
@Nonbinding
to an interceptor binding member, and -
how the interceptor bindings of a custom implementation of the
Interceptor
interface are determined.
If any interceptor binding has a member annotated @javax.enterprise.util.Nonbinding
, the member is ignored when performing interceptor resolution, and the method does not need to have the same annotation member value.
For a custom implementation of the Interceptor
interface defined in The Interceptor
interface, the container calls getInterceptorBindings()
to determine the interceptor bindings of the interceptor and intercepts()
to determine if the interceptor intercepts a given kind of lifecycle callback or business method.
A custom implementation of the Interceptor
interface may implement the Prioritized
interface to be enabled for the entire application with a priority value.
10. Events
Beans may produce and consume events. This facility allows beans to interact in a completely decoupled fashion, with no compile-time dependency between the interacting beans. Most importantly, it allows stateful beans in one architectural tier of the application to synchronize their internal state with state changes that occur in a different tier.
An event comprises:
-
A Java object - the event object
-
A set of instances of qualifier types - the event qualifiers
The event object acts as a payload, to propagate state from producer to consumer. The event qualifiers act as topic selectors, allowing the consumer to narrow the set of events it observes.
An observer method acts as event consumer, observing events of a specific type - the observed event type - with a specific set of qualifiers - the observed event qualifiers. An observer method will be notified of an event if the event object is assignable to the observed event type, and if the set of observed event qualifiers is a subset of all the event qualifiers of the event.
10.1. Event types and qualifier types
An event object is an instance of a concrete Java class with no unresolvable type variables. The event types of the event include all superclasses and interfaces of the runtime class of the event object.
An event type may not contain an unresolvable type variable. A wildcard type is not considered an unresolvable type variable.
An event qualifier type is just an ordinary qualifier type as specified in Defining new qualifier types, typically defined as @Target({METHOD, FIELD, PARAMETER, TYPE})
or @Target({FIELD, PARAMETER})
.
Every event has the qualifier @javax.enterprise.inject.Any
, even if it does not explicitly declare this qualifier.
Any Java type may be an observed event type.
10.2. Firing events
Beans fire events via an instance of the javax.enterprise.event.Event
interface, which may be injected:
@Inject Event<LoggedInEvent> loggedInEvent;
Any combination of qualifiers may be specified at the injection point:
@Inject @Admin Event<LoggedInEvent> adminLoggedInEvent;
Or the application may specify qualifiers dynamically:
@Inject Event<LoggedInEvent> loggedInEvent;
...
LoggedInEvent event = new LoggedInEvent(user);
if ( user.isAdmin() ) {
loggedInEvent.select( new AdminQualifier() ).fire(event);
}
else {
loggedInEvent.fire(event);
loggedInEvent.fireAsync(event);
}
In this example, the event sometimes has the qualifier @Admin
, depending upon the value of user.isAdmin()
.
It is first fired synchronously with fire()
then asynchronously with fireAsync()
.
10.2.1. Firing events synchronously
The method fire()
accepts an event object:
public void login() {
...
loggedInEvent.fire( new LoggedInEvent(user) );
}
Event fired with the fire()
method is fired synchronously.
All the resolved synchronous observers (as defined in Observer resolution) are called in the thread in which fire()
was called.
A synchronous observer notification blocks the calling thread until it completes.
10.2.2. Firing events asynchronously
Events may also be fired asynchronously using one of the methods fireAsync()
@Inject Event<LoggedInEvent> loggedInEvent;
public void login() {
...
loggedInEvent.fireAsync( new LoggedInEvent(user) );
}
Event fired with the fireAsync()
method is fired asynchronously.
All the resolved asynchronous observers (as defined in Observer resolution) are called in one or more different threads.
Method fireAsync()
returns immediately.
10.2.3. The Event
interface
The Event
interface provides a method for firing events with a specified combination of type and qualifiers:
public interface Event<T> {
public void fire(T event);
public <U extends T> CompletionStage<U> fireAsync(U event);
public <U extends T> CompletionStage<U> fireAsync(U event, NotificationOptions options);
public Event<T> select(Annotation... qualifiers);
public <U extends T> Event<U> select(Class<U> subtype, Annotation... qualifiers);
public <U extends T> Event<U> select(TypeLiteral<U> subtype, Annotation... qualifiers);
}
For an injected Event
:
-
the specified type is the type parameter specified at the injection point, and
-
the specified qualifiers are the qualifiers specified at the injection point.
For example, this injected Event
has specified type LoggedInEvent
:
@Inject Event<LoggedInEvent> any;
The select()
method returns a child Event
for a given specified type and additional specified qualifiers.
If no specified type is given, the specified type is the same as the parent.
For example, this child Event
has required type AdminLoggedInEvent
and additional specified qualifier @Admin
:
Event<AdminLoggedInEvent> admin = any.select(
AdminLoggedInEvent.class,
new AdminQualifier() );
If the specified type contains a type variable, an IllegalArgumentException
is thrown.
If two instances of the same non repeating qualifier type are passed to select()
, an IllegalArgumentException
is thrown.
If an instance of an annotation that is not a qualifier type is passed to select()
, an IllegalArgumentException
is thrown.
The methods fire()
and fireAsync()
fire an event with the specified qualifiers and notify observers, as defined by Observer notification.
If the container is unable to resolve the parameterized type of the event object, it uses the specified type to infer the parameterized type of the event types.
The method fireAsync()
may be called with a NotificationOptions
object to configure the observer methods notification, e.g. to specify an Executor
object to be used for asynchronous delivery.
The container is permitted to define other non-portable notification options.
The following elements are container specific:
-
the default
Executor
used by the container whenfireAsync()
is called without specifying anExecutor
, -
the
CompletionStage
returned byfireAsync
methods, and -
all dependent stages of this initial CompletionStage.
If the runtime type of the event object contains an unresolvable type variable, an IllegalArgumentException
is thrown.
If the runtime type of the event object is assignable to the type of a container lifecycle event, an IllegalArgumentException
is thrown.
10.2.4. The built-in Event
The container must provide a built-in bean with:
-
Event<X>
in its set of bean types, for every Java typeX
that does not contain a type variable, -
every event qualifier type in its set of qualifier types,
-
scope
@Dependent
, -
no bean name, and
-
an implementation provided automatically by the container.
If an injection point of raw type Event
is defined, the container automatically detects the problem and treats it as a definition error.
The built-in implementation must be a passivation capable dependency, as defined in Passivation capable dependencies.
10.3. Observer resolution
The process of matching an event to its observer methods is called observer resolution. The container considers event type and qualifiers when resolving observers.
Observer resolution usually occurs at runtime.
An event is delivered to an observer method if:
-
The observer method belongs to an enabled bean.
-
An event type is assignable to the observed event type, taking type parameters into consideration.
-
The observer method has no event qualifiers or has a subset of the event qualifiers. An observer method has an event qualifier if it has an observed event qualifier with (a) the same type and (b) the same annotation member value for each member which is not annotated
@javax.enterprise.util.Nonbinding
. -
Either the event is not a container lifecycle event, as defined in Container lifecycle events, or the observer method belongs to an extension.
-
The event is fired synchronously and the observer is a synchronous observer as defined in Declaring an observer method.
-
The event is fired asynchronously and the observer is an asynchronous observer as defined in Declaring an observer method.
If the runtime type of the event object contains an unresolvable type variable, the container must throw an IllegalArgumentException
.
For a custom implementation of the ObserverMethod
interface defined in The ObserverMethod
interface, the container must call getObservedType()
and getObservedQualifiers()
to determine the observed event type and qualifiers, and isAsync()
to determine whether the observer is asynchronous or synchronous.
10.3.1. Assignability of type variables, raw and parameterized types
An event type is considered assignable to a type variable if the event type is assignable to the upper bound, if any.
A parameterized event type is considered assignable to a raw observed event type if the raw types are identical.
A parameterized event type is considered assignable to a parameterized observed event type if they have identical raw type and for each parameter:
-
the observed event type parameter is an actual type with identical raw type to the event type parameter, and, if the type is parameterized, the event type parameter is assignable to the observed event type parameter according to these rules, or
-
the observed event type parameter is a wildcard and the event type parameter is assignable to the upper bound, if any, of the wildcard and assignable from the lower bound, if any, of the wildcard, or
-
the observed event type parameter is a type variable and the event type parameter is assignable to the upper bound, if any, of the type variable.
10.3.2. Event qualifier types with members
As usual, the qualifier type may have annotation members:
@Qualifier
@Target(PARAMETER)
@Retention(RUNTIME)
public @interface Role {
String value();
}
Consider the following event:
@Inject Event<LoggedInEvent> loggedInEvent;
...
public void login() {
final User user = ...;
loggedInEvent.select(new RoleQualifier() { public String value() { return user.getRole(); } }).fire(new LoggedInEvent(user));
}
Where RoleQualifier
is an implementation of the qualifier type Role
:
public abstract class RoleQualifier
extends AnnotationLiteral<Role>
implements Role {}
Then the following observer method will always be notified of the event:
public void afterLogin(@Observes LoggedInEvent event) { ... }
Whereas this observer method may or may not be notified, depending upon the value of user.getRole()
:
public void afterAdminLogin(@Observes @Role("admin") LoggedInEvent event) { ... }
As usual, the container uses equals()
to compare event qualifier type member values.
10.3.3. Multiple event qualifiers
An event parameter may have multiple qualifiers.
public void afterDocumentUpdatedByAdmin(@Observes @Updated @ByAdmin Document doc) { ... }
Then this observer method will be notified if the set of observer qualifiers is a subset of the fired event’s qualifiers or an empty set:
@Inject Event<Document> documentEvent;
...
documentEvent.select(new UpdatedQualifier(), new ByAdminQualifier(), new ClarificationQualifier()).fire(document);
In the above example the event is fired with @ByAdmin
, @Updated
, and @Clarification
qualifiers. The observer qualifiers are @Updated
and @ByAdmin
.
Observer qualifiers therefore form a subset of event qualifiers and the observer will be notified.
Other, less specific, observers will also be notified of this event:
public void afterDocumentUpdated(@Observes @Updated Document doc) { ... }
public void afterDocumentEvent(@Observes Document doc) { ... }
On the other hand, following observer will not be notified as slightly different behaviour applies to observers with @Default
qualifier:
public void afterDocumentDefaultEvent(@Observes @Default Document doc) { ... }
Such observer will only be notified for events having either no qualifiers or only @Default
qualifier:
@Inject Event<Document> documentEvent;
@Inject @Default Event<Document> documentDefaultEvent;
...
documentEvent.fire(document);
documentDefaultEvent.fire(document);
10.4. Observer methods
An observer method allows the application to receive and respond to event notifications.
An observer method is a non-abstract method of a managed bean class or of an extension, as defined in Container lifecycle events. An observer method may be either static or non-static.
There may be arbitrarily many observer methods with the same event parameter type and qualifiers.
A bean (or extension) may declare multiple observer methods.
10.4.1. Event parameter of an observer method
Each observer method must have exactly one event parameter, of the same type as the event type it observes. When searching for observer methods for an event, the container considers the type and qualifiers of the event parameter.
If the event parameter does not explicitly declare any qualifier, the observer method observes events with no qualifier.
The event parameter type may contain a type variable or wildcard.
The event parameter may be an array type whose component type contains a type variable or a wildcard.
Modifications made to the event parameter in an observer method are propagated to following observers. The container is not required to guarantee a consistent state for an event parameter modified by asynchronous observers.
10.4.2. Declaring an observer method
An observer method may be declared by annotating a parameter @javax.enterprise.event.Observes
or @javax.enterprise.event.ObservesAsync
of a default-access, public, protected or private method.
That parameter is the event parameter.
The declared type of the parameter is the observed event type.
If @Observes
is used the observer method is a synchronous observer method.
If @ObservesAsync
is used the observer method is an asynchronous observer method.
public void afterLogin(@Observes LoggedInEvent event) { ... }
public void asyncAfterLogin(@ObservesAsync LoggedInEvent event) { ... }
If a method has more than one parameter annotated @Observes
or @ObservesAsync
, the container automatically detects the problem and treats it as a definition error.
If a method has a parameter annotated @Observes
and @ObservesAsync
, the container automatically detects the problem and treats it as a definition error.
Observed event qualifiers may be declared by annotating the event parameter:
public void afterLogin(@Observes @Admin LoggedInEvent event) { ... }
If an observer method is annotated @Produces
or @Inject
or has a parameter annotated @Disposes
, the container automatically detects the problem and treats it as a definition error.
Interceptors and decorators may not declare observer methods.
If an interceptor or decorator has a method with a parameter annotated @Observes
or @ObservesAsync
, the container automatically detects the problem and treats it as a definition error.
In addition to the event parameter, observer methods may declare additional parameters, which may declare qualifiers. These additional parameters are injection points.
public void afterLogin(@Observes LoggedInEvent event, @Manager User user, Logger log) { ... }
10.4.3. The EventMetadata
interface
The interface javax.enterprise.inject.spi.EventMetadata
provides access to metadata about an observed event.
public interface EventMetadata {
public Set<Annotation> getQualifiers();
public InjectionPoint getInjectionPoint();
public Type getType();
}
-
getQualifiers()
returns the set of qualifiers with which the event was fired. -
getInjectionPoint()
returns theInjectionPoint
from which this event payload was fired, ornull
if it was fired fromBeanManager.fireEvent(…)
. -
getType()
returns the type representing runtime class of the event object with type variables resolved.
The container must provide a bean with scope @Dependent
, bean type EventMetadata
and qualifier @Default
, allowing observer methods to obtain information about the events they observe.
If an injection point of type EventMetadata
and qualifier @Default
which is not a parameter of an observer method exists, the container automatically detects the problem and treats it as a definition error.
public void afterLogin(@Observes LoggedInEvent event, EventMetadata metadata) { ... }
10.4.4. Conditional observer methods
A conditional observer method is an observer method which is notified of an event only if an instance of the bean that defines the observer method already exists in the current context.
A conditional observer method may be declared by specifying notifyObserver=IF_EXISTS
.
public void refreshOnDocumentUpdate(@Observes(notifyObserver=IF_EXISTS) @Updated Document doc) { ... }
public void asyncRefreshOnDocumentUpdate(@ObservesAsync(notifyObserver=IF_EXISTS) @Updated Document doc) { ... }
Beans with scope @Dependent
may not have conditional observer methods.
If a bean with scope @Dependent
has an observer method declared notifyObserver=IF_EXISTS
, the container automatically detects the problem and treats it as a definition error.
The enumeration javax.enterprise.event.Reception
identifies the possible values of notifyObserver
:
public enum Reception { IF_EXISTS, ALWAYS }
10.4.5. Transactional observer methods
Transactional observer methods are observer methods which receive event notifications during the before or after completion phase of the transaction in which the event was fired. If no transaction is in progress when the event is fired, they are notified at the same time as other observers.
If the transaction is in progress, but javax.transaction.Synchronization
callback cannot be registered due to the transaction being already marked for rollback or in state where javax.transaction.Synchronization
callbacks cannot be registered, the before completion, after completion and after failure observer methods are notified at the same time as other observers, but after_success observer methods get skipped.
-
A before completion observer method is called during the before completion phase of the transaction.
-
An after completion observer method is called during the after completion phase of the transaction.
-
An after success observer method is called during the after completion phase of the transaction, only when the transaction completes successfully.
-
An after failure observer method is called during the after completion phase of the transaction, only when the transaction fails.
The enumeration javax.enterprise.event.TransactionPhase
identifies the kind of transactional observer method:
public enum TransactionPhase {
IN_PROGRESS,
BEFORE_COMPLETION,
AFTER_COMPLETION,
AFTER_FAILURE,
AFTER_SUCCESS
}
A transactional observer method may be declared by specifying any value other than IN_PROGRESS
for during
:
void onDocumentUpdate(@Observes(during=AFTER_SUCCESS) @Updated Document doc) { ... }
Asynchronous observer cannot be declared transactional.
10.5. Observer notification
When an event is fired by the application, the container must:
-
determine the observer methods for that event according to the rules of observer resolution defined by Observer resolution, then,
-
for each observer method, either invoke the observer method immediately, or register the observer method for later invocation during the transaction completion phase, using a JTA
Synchronization
. -
honor the priority of observer methods as defined in Observer ordering.
The container calls observer methods as defined in Invocation of observer methods.
-
If the observer method is a transactional observer method and there is currently a JTA transaction in progress, the container calls the observer method during the appropriate transaction completion phase.
-
If there is no context active for the scope to which the bean declaring the observer method belongs, then the observer method should not be called.
-
Otherwise, the container calls the observer immediately.
Any observer method called before completion of a transaction may call setRollbackOnly()
to force a transaction rollback.
An observer method may not directly initiate, commit or rollback JTA transactions.
Observer methods may throw exceptions:
-
If the observer method is a transactional observer method, any exception is caught and logged by the container.
-
If the observer method is asynchronous, the exception aborts processing of the observer but not of the event. Exception management during an asynchronous event is defined in Handling multiple exceptions thrown during an asynchronous event.
-
Otherwise, the exception aborts processing of the event. No other observer methods of that event will be called. The
BeanManager.fireEvent()
orEvent.fire()
method rethrows the exception. If the exception is a checked exception, it is wrapped and rethrown as an (unchecked)ObserverException
.
For a custom implementation of the ObserverMethod
interface defined in The ObserverMethod
interface, the container must call getTransactionPhase()
to determine if the observer method is transactional observer method, and notify()
which accepts javax.enterprise.inject.spi.EventContext
to invoke the method.
10.5.1. Handling multiple exceptions thrown during an asynchronous event
If an event is asynchronous, and an exception is thrown by any of its notified observers, the CompletionStage
returned by fireAsync
will complete exceptionally with java.util.concurrent.CompletionException
exception.
CompletionException
contains all exceptions thrown by observers as suppressed exceptions.
They can be accessed as an array of throwable
with the getSuppressed
method.
It can be handled with one of the CompletionStage
methods related to exceptions:
myEvent.fireAsync(anEventObject)
.handle((ok, ex) -> {
if (ok != null) {
return ok;
} else {
for (Throwable t : ex.getSuppressed()) {
...
}
...
} });
If no exception is thrown by observers then the resulting CompletionStage is completed normally with the event object.
10.5.2. Observer ordering
Before the actual observer notification, the container determines an order in which the observer methods for a certain event are invoked.
The priority of an observer method may be declared by annotating the event parameter with @Priority
annotation.
If a @Priority
annotation is declared on an event parameter of an asynchronous observer method, non-portable behavior results.
If no @Priority
annotation is specified, the default priority javax.interceptor.Interceptor.Priority.APPLICATION + 500
is assumed.
Observers with smaller priority values are called first.
void afterLogin(@Observes @Priority(javax.interceptor.Interceptor.Priority.APPLICATION) LoggedInEvent event) { ... }
The order of more than one observer with the same priority is undefined and the observer methods are notified therefore in a non predictable order.
10.5.3. Observer method invocation context
The transaction context and lifecycle contexts active when an observer method is invoked depend upon what kind of observer method it is.
-
If the observer method is asynchronous, it is called in a new lifecycle contexts and a new transaction context. As specified in Context management for built-in scopes, contexts associated with built-in normal scope don’t propagate across asynchronous observers.
-
If the observer method is a before completion transactional observer method, it is called within the context of the transaction that is about to complete and with the same lifecycle contexts.
-
Otherwise, if the observer method is any other kind of transactional observer method, it is called in an unspecified transaction context, but with the same lifecycle contexts as the transaction that just completed.
-
Otherwise, the observer method is called in the same transaction context and lifecycle contexts as the invocation of
Event.fire()
orBeanManager.fireEvent()
.
11. Portable extensions
A portable extension may integrate with the container by:
-
Providing its own beans, interceptors and decorators to the container
-
Injecting dependencies into its own objects using the dependency injection service
-
Providing a context implementation for a custom scope
-
Augmenting or overriding the annotation-based metadata with metadata from some other source
11.1. The Bean
interface
The BeanAttributes
interface exposes the basic attributes of a bean.
public interface BeanAttributes<T> {
public Set<Type> getTypes();
public Set<Annotation> getQualifiers();
public Class<? extends Annotation> getScope();
public String getName();
public Set<Class<? extends Annotation>> getStereotypes();
public boolean isAlternative();
}
-
getTypes()
,getQualifiers()
,getScope()
,getName()
andgetStereotypes()
must return the bean types, qualifiers, scope type, bean name and stereotypes of the bean, as defined in Concepts. -
isAlternative()
must returntrue
if the bean is an alternative, andfalse
otherwise.
The interface javax.enterprise.inject.spi.Bean
defines everything the container needs to manage instances of a certain bean.
public interface Bean<T> extends Contextual<T>, BeanAttributes<T> {
public Class<?> getBeanClass();
public Set<InjectionPoint> getInjectionPoints();
public boolean isNullable();
}
-
getBeanClass()
returns the bean class of the managed bean or of the bean that declares the producer method or field. -
getInjectionPoints()
returns a set ofInjectionPoint
objects, defined in Injection point metadata, representing injection points of the bean, that will be validated by the container at initialization time. -
isNullable()
is deprecated in CDI 1.1 and should be ignored by the container.
Note that implementations of Bean
must also implement the inherited operations defined by the Contextual
interface defined in The Contextual
interface.
An instance of Bean
must exist for every enabled bean.
A portable extension may add support for new kinds of beans beyond those defined by the this specification by implementing Bean
and registering beans with the container, using the mechanism defined in AfterBeanDiscovery
event.
Custom implementations of Bean
are encouraged to implement PassivationCapable
and may be required to in later revisions of this specification.
11.1.1. The Decorator
interface
The Bean
object for a decorator must implement the interface javax.enterprise.inject.spi.Decorator
.
public interface Decorator<T> extends Bean<T> {
public Set<Type> getDecoratedTypes();
public Type getDelegateType();
public Set<Annotation> getDelegateQualifiers();
}
-
getDecoratedTypes()
returns the decorated types of the decorator. -
getDelegateType()
andgetDelegateQualifiers()
return the delegate type and qualifiers of the decorator.
An instance of Decorator
exists for every enabled decorator.
11.1.2. The Interceptor
interface
The Bean
object for an interceptor must implement javax.enterprise.inject.spi.Interceptor
.
public interface Interceptor<T> extends Bean<T> {
public Set<Annotation> getInterceptorBindings();
public boolean intercepts(InterceptionType type);
public Object intercept(InterceptionType type, T instance, InvocationContext ctx) throws Exception;
}
-
getInterceptorBindings()
returns the interceptor bindings of the interceptor. -
intercepts()
returnstrue
if the interceptor intercepts the specified kind of lifecycle callback or method invocation, andfalse
otherwise. -
intercept()
invokes the specified kind of lifecycle callback or method invocation interception upon the given instance of the interceptor.
An InterceptionType
identifies the kind of lifecycle callback or business method.
public enum InterceptionType {
AROUND_INVOKE, AROUND_CONSTRUCT, POST_CONSTRUCT, PRE_DESTROY, PRE_PASSIVATE, POST_ACTIVATE, AROUND_TIMEOUT
}
An instance of Interceptor
exists for every enabled interceptor.
11.1.3. The ObserverMethod
interface
The interface javax.enterprise.inject.spi.ObserverMethod
defines everything the container needs to know about an observer method.
public interface ObserverMethod<T> extends Prioritized {
public Class<?> getBeanClass();
public Type getObservedType();
public Set<Annotation> getObservedQualifiers();
public Reception getReception();
public TransactionPhase getTransactionPhase();
public int getPriority();
public void notify(T event);
public void notify(EventContext<T> eventContext);
public boolean isAsync();
}
-
getBeanClass()
returns the class of the type that declares the observer method. -
getObservedType()
andgetObservedQualifiers()
return the observed event type and qualifiers. -
getReception()
returnsIF_EXISTS
for a conditional observer andALWAYS
otherwise. -
getTransactionPhase()
returns the appropriate transaction phase for a transactional observer method orIN_PROGRESS
otherwise. -
getPriority()
this method inherited fromPrioritized
interface returns the priority that will be used by the container to determine the notification order as defined in Observer ordering. If this method is not implemented the default priorityAPPLICATION + 500
is assumed. -
notify()
calls the observer method, as defined in Observer notification. -
isAsync()
returnstrue
if the method is an asynchronous observer method otherwise returnsfalse
.
An instance of ObserverMethod
must exist for every observer method of every enabled bean.
11.2. The Producer
and InjectionTarget
interfaces
The interface javax.enterprise.inject.spi.Producer
provides a generic operation for producing an instance of a type.
public interface Producer<T> {
public T produce(CreationalContext<T> ctx);
public void dispose(T instance);
public Set<InjectionPoint> getInjectionPoints();
}
For a Producer
that represents a class:
-
produce()
calls the constructor annotated@Inject
if it exists, or the constructor with no parameters otherwise, as defined in Injection using the bean constructor, and returns the resulting instance. If the class has interceptors,produce()
is responsible for building the interceptors and decorators of the instance. The instance returned byproduce()
may be a proxy. -
dispose()
does nothing. -
getInjectionPoints()
returns the set ofInjectionPoint
objects representing all injected fields, bean constructor parameters and initializer method parameters.
For a Producer
that represents a producer method or field:
-
produce()
calls the producer method on, or accesses the producer field of, a contextual instance of the bean that declares the producer method, as defined in Invocation of producer or disposer methods. -
dispose()
calls the disposer method, if any, on a contextual instance of the bean that declares the disposer method, as defined in Invocation of producer or disposer methods, or performs any additional required cleanup, if any, to destroy state associated with a resource. -
getInjectionPoints()
returns the set ofInjectionPoint
objects representing all parameters of the producer method.
The subinterface javax.enterprise.inject.spi.InjectionTarget
provides operations for performing dependency injection and lifecycle callbacks on an instance of a type.
public interface InjectionTarget<T>
extends Producer<T> {
public void inject(T instance, CreationalContext<T> ctx);
public void postConstruct(T instance);
public void preDestroy(T instance);
}
-
inject()
performs dependency injection upon the given object. The container sets the value of all injected fields, and calls all initializer methods, as defined in Injection of fields and initializer methods. -
postConstruct()
calls the@PostConstruct
callback, if it exists. -
preDestroy()
calls the@PreDestroy
callback, if it exists.
Implementations of Producer
and InjectionTarget
must ensure that the set of injection points returned by getInjectionPoints()
are injected by produce()
or inject()
.
11.3. The BeanManager
object
The interface javax.enterprise.inject.spi.BeanManager
provides operations for obtaining contextual references for beans, along with many other operations of use to portable extensions.
The container provides a built-in bean with bean type BeanManager
, scope @Dependent
and qualifier @Default
. The built-in implementation must be a passivation capable dependency, as defined in Passivation capable dependencies.
Thus, any bean may obtain an instance of BeanManager
by injecting it:
@Inject BeanManager manager;
Note that, an exception is thrown if the following operations are called before the AfterBeanDiscovery
event is fired:
-
getBeans(String)
, -
getBeans(Type, Annotation…)
, -
getPassivationCapableBean(String)
-
resolve(Set)
, -
resolveDecorators(Set, Annotation…)
, -
resolveInterceptors(InterceptionType, Annotation…)
, -
resolveObserverMethods(Object, Annotation…)
, -
validate(InjectionPoint)
,
and if the following operations are called before the AfterDeploymentValidation
event is fired:
-
getReference(Bean, Type, CreationalContext)
-
getInjectableReference(InjectionPoint, CreationalContext)
.
All other operations of BeanManager may be called at any time during the execution of the application.
11.3.1. Obtaining a reference to the CDI container
Portable extensions and other objects sometimes interact directly with the container via programmatic API call.
The abstract javax.enterprise.inject.spi.CDI
provides access to the BeanManager
as well providing lookup of bean instances.
public abstract class CDI<T> implements Instance<T> {
public static CDI<Object> current() { ... }
public static void setCDIProvider(CDIProvider provider);
public abstract BeanManager getBeanManager();
}
A portable extension or other object may obtain a reference to the current container by calling CDI.current()
.
CDI.getBeanManager()
may be called at any time after the container fires the BeforeBeanDiscovery
container lifecycle event until the container fires the BeforeShutdown
container lifecycle event.
Other methods on CDI
may be called after the application initialization is completed until the application shutdown starts.
If methods on CDI
are called at any other time, non-portable behavior results.
CDI implements javax.enterprise.inject.Instance
and therefore might be used to perform programmatic lookup as defined in The Instance
interface.
If no qualifier is passed to CDI.select()
method, the @Default
qualifier is assumed.
When CDI.current()
is called, getCDI()
method is called on javax.enterprise.inject.spi.CDIProvider
.
The CDIProvider
to use may be set by the application or container using the setCDIProvider()
method.
If the setCDIProvider()
has not been called, the service provider with highest priority of the service javax.enterprise.inject.spi.CDIProvider
declared in META-INF/services is used.
The order of more than one CDIProvider
with the same priority is undefined.
If no provider is available an IllegalStateException
is thrown.
public interface CDIProvider extends Prioritized {
CDI<Object> getCDI();
default int getPriority();
}
-
getPriority()
method is inherited fromPrioritized
interface and returns the priority for theCDIProvider
. If this method is not implemented the default priority0
is assumed.
11.3.2. Obtaining a contextual reference for a bean
The method BeanManager.getReference()
returns a contextual reference for a given bean and bean type, as defined in Contextual reference for a bean.
public Object getReference(Bean<?> bean, Type beanType, CreationalContext<?> ctx);
The first parameter is the Bean
object representing the bean.
The second parameter represents a bean type that must be implemented by any client proxy that is returned.
The third parameter is an instance of CreationalContext
that may be used to destroy any object with scope @Dependent
that is created.
If the given type is not a bean type of the given bean, an IllegalArgumentException
is thrown.
11.3.3. Obtaining an injectable reference
The method BeanManager.getInjectableReference()
returns an injectable reference for a given injection point, as defined in Injectable references.
public Object getInjectableReference(InjectionPoint ij, CreationalContext<?> ctx);
The first parameter represents the target injection point.
The second parameter is an instance of CreationalContext
that may be used to destroy any object with scope @Dependent
that is created.
If the InjectionPoint
represents a decorator delegate injection point, getInjectableReference()
returns a delegate, as defined in Decorator delegate injection points.
If typesafe resolution results in an unsatisfied dependency, the container must throw an UnsatisfiedResolutionException
. If typesafe resolution results in an unresolvable ambiguous dependency, the container must throw an AmbiguousResolutionException
.
Implementations of Bean
usually maintain a reference to an instance of BeanManager
. When the Bean
implementation performs dependency injection, it must obtain the contextual instances to inject by calling BeanManager.getInjectableReference()
, passing an instance of InjectionPoint
that represents the injection point and the instance of CreationalContext
that was passed to Bean.create()
.
11.3.4. Obtaining non-contextual instance
A non-contextual instance can be obtained and injected from an InjectionTarget
, however the InjectionTarget
interface is designed to work on contextual instances.
A helper class, Unmanaged
provides a set of methods optimized for working with non-contextual instances.
For example:
Unmanaged<Foo> unmanagedFoo = new Unmanaged<Foo>(Foo.class);
UnmanagedInstance<Foo> fooInstance = unmanagedFoo.newInstance();
Foo foo = fooInstance.produce().inject().postConstruct().get();
... // Use the foo instance
fooInstance.preDestroy().dispose();
11.3.5. Obtaining a CreationalContext
An instance of CreationalContext
for a certain instance of Contextual
may be obtained by calling BeanManager.createCreationalContext()
.
public <T> CreationalContext<T> createCreationalContext(Contextual<T> contextual);
An instance of CreationalContext
for a non-contextual object may be obtained by passing a null value to createCreationalContext()
.
11.3.6. Obtaining a Bean
by type
The method BeanManager.getBeans()
returns the set of beans which have the given required type and qualifiers and are available for injection in the module or library containing the class into which the BeanManager
was injected or the class from whose JNDI environment namespace the BeanManager
was obtained, according to the rules for candidates of typesafe resolution defined in Performing typesafe resolution.
public Set<Bean<?>> getBeans(Type beanType, Annotation... qualifiers);
The first parameter is a required bean type. The remaining parameters are required qualifiers.
If no qualifiers are passed to getBeans()
, the default qualifier @Default
is assumed.
If the given type represents a type variable, an IllegalArgumentException
is thrown.
If two instances of the same non repeating qualifier type are given, an IllegalArgumentException
is thrown.
If an instance of an annotation that is not a qualifier type is given, an IllegalArgumentException
is thrown.
11.3.7. Obtaining a Bean
by name
The method BeanManager.getBeans()
which accepts a string returns the set of beans which have the given bean name and are available for injection in the module or library containing the class into which the BeanManager
was injected or the class from whose JNDI environment namespace the BeanManager
was obtained, according to the rules of name resolution defined in Name resolution.
public Set<Bean<?>> getBeans(String name);
The parameter is a bean name.
11.3.8. Obtaining a passivation capable bean by identifier
The method BeanManager.getPassivationCapableBean()
returns the PassivationCapable
bean with the given identifier (see Passivation capable beans).
public Bean<?> getPassivationCapableBean(String id);
11.3.9. Resolving an ambiguous dependency
The method BeanManager.resolve()
applies the ambiguous dependency resolution rules defined in Unsatisfied and ambiguous dependencies to a set of Bean
s.
public <X> Bean<? extends X> resolve(Set<Bean<? extends X>> beans);
If the ambiguous dependency resolution rules fail (as defined in Unsatisfied and ambiguous dependencies, the container must throw an AmbiguousResolutionException
.
BeanManager.resolve()
must return null if:
-
null is passed to
resolve()
, or -
no beans are passed to
resolve()
.
11.3.10. Validating an injection point
The BeanManager.validate()
operation validates an injection point and throws an InjectionException
if there is a deployment problem (for example, an unsatisfied or unresolvable ambiguous dependency) associated with the injection point.
public void validate(InjectionPoint injectionPoint);
11.3.11. Firing an event
The method BeanManager.getEvent()
returns an instance of Event
with specified type java.lang.Object
and specified qualifier @Default
.
Event<Object> getEvent();
The returned instance can be used like a standard Event
as described in Events.
The method BeanManager.fireEvent()
is deprecated since version 2.0 of Contexts and Dependency Injection.
11.3.12. Observer method resolution
The method BeanManager.resolveObserverMethods()
resolves observer methods for an event according to the rules of observer resolution defined in Observer resolution.
public <T> Set<ObserverMethod<? super T>> resolveObserverMethods(T event, Annotation... qualifiers);
The first parameter of resolveObserverMethods()
is the event object.
The remaining parameters are event qualifiers.
If the runtime type of the event object contains a type variable, an IllegalArgumentException
is thrown.
If two instances of the same non repeating qualifier type are given, an IllegalArgumentException
is thrown.
If an instance of an annotation that is not a qualifier type is given, an IllegalArgumentException
is thrown.
11.3.13. Decorator resolution
The method BeanManager.resolveDecorators()
returns the ordered list of decorators for a set of bean types and a set of qualifiers and which are enabled in the module or library containing the class into which the BeanManager
was injected or the class from whose JNDI environment namespace the BeanManager
was obtained, as defined in Decorator resolution.
List<Decorator<?>> resolveDecorators(Set<Type> types, Annotation... qualifiers);
The first argument is the set of bean types of the decorated bean. The annotations are qualifiers declared by the decorated bean.
If two instances of the same non repeating qualifier type are given, an IllegalArgumentException
is thrown.
If an instance of an annotation that is not a qualifier type is given, an IllegalArgumentException
is thrown.
If the set of bean types is empty, an IllegalArgumentException
is thrown.
11.3.14. Interceptor resolution
The method BeanManager.resolveInterceptors()
returns the ordered list of interceptors for a set of interceptor bindings and a type of interception and which are enabled in the module or library containing the class into which the BeanManager
was injected or the class from whose JNDI environment namespace the BeanManager
was obtained, as defined in Interceptor resolution.
List<Interceptor<?>> resolveInterceptors(InterceptionType type,
Annotation... interceptorBindings);
If two instances of the same non repeating interceptor binding type are given, an IllegalArgumentException
is thrown.
If no interceptor binding type instance is given, an IllegalArgumentException
is thrown.
If an instance of an annotation that is not an interceptor binding type is given, an IllegalArgumentException
is thrown.
11.3.15. Determining if an annotation is a qualifier type, scope type, stereotype or interceptor binding type
A portable extension may test an annotation to determine if it is a qualifier type, scope type, stereotype or interceptor binding type, obtain the set of meta-annotations declared by a stereotype or interceptor binding type, or determine if a scope type is a normal or passivating scope.
public boolean isScope(Class<? extends Annotation> annotationType);
public boolean isQualifier(Class<? extends Annotation> annotationType);
public boolean isInterceptorBinding(Class<? extends Annotation> annotationType);
public boolean isStereotype(Class<? extends Annotation> annotationType);
public boolean isNormalScope(Class<? extends Annotation> scopeType);
public boolean isPassivatingScope(Class<? extends Annotation> scopeType);
public Set<Annotation> getInterceptorBindingDefinition(Class<? extends Annotation> qualifierType);
public Set<Annotation> getStereotypeDefinition(Class<? extends Annotation> stereotype);
11.3.16. Determining the hash code and equivalence of qualifiers and interceptor bindings
A portable extension may determine if two qualifiers or two interceptor bindings are considered equivalent for the purposes of typesafe resolution, as defined in Performing typesafe resolution.
public boolean areQualifiersEquivalent(Annotation qualifier1, Annotation qualifier2);
public boolean areInterceptorBindingsEquivalent(Annotation interceptorBinding1, Annotation interceptorBinding2);
A portable extension may determine the hash code of a qualifier or interceptor binding, ignoring any members annotated with @Nonbinding
.
public int getQualifierHashCode(Annotation qualifier);
public int getInterceptorBindingHashCode(Annotation interceptorBinding);
11.3.17. Obtaining the active Context
for a scope
The method BeanManager.getContext()
retrieves an active context object associated with the given scope, as defined in The active context object for a scope.
public Context getContext(Class<? extends Annotation> scopeType);
11.3.18. Obtaining the ELResolver
The method BeanManager.getELResolver()
returns the javax.el.ELResolver
specified in Integration with Unified EL.
public ELResolver getELResolver();
11.3.19. Obtaining an AnnotatedType
for a class
The method BeanManager.createAnnotatedType()
returns an AnnotatedType
that may be used to read the annotations of the given Java class or interface.
public <T> AnnotatedType<T> createAnnotatedType(Class<T> type);
11.3.20. Obtaining an InjectionTarget
for a class
The method BeanManager.getInjectionTargetFactory()
returns a factory capable of creating container provided implementations of InjectionTarget
for a given AnnotatedType
or throws an IllegalArgumentException
if there is a definition error associated with any injection point of the type.
public <T> InjectionTargetFactory<T> getInjectionTargetFactory(AnnotatedType<T> type);
public interface InjectionTargetFactory<T> {
public InjectionTarget<T> createInjectionTarget(Bean<T> bean);
public AnnotatedTypeConfigurator<T> configure();
}
Null should be passed to InjectionTargetFactory.createInjectionTarget()
to create a non-contextual injection target.
-
configure()
method returns anAnnotatedTypeConfigurator
as defined inAnnotatedTypeConfigurator
SPI to configure theAnnotatedType
used to create theInjectionTargetFactory
. Subsequent invocations of theconfigure()
method within oneInjectionTargetFactory
instance will always return the sameAnnotatedTypeConfigurator
instance. OncecreateInjectionTarget()
method has been invoked, any invocations ofconfigure()
throws anIllegalStateException
.
The method BeanManager.createInjectionTarget()
is deprecated since version 1.1 of Contexts and Dependency Injection.
11.3.21. Obtaining a Producer
for a field or method
The method BeanManager.getProducerFactory()
returns a factory capable of creating container provided implementations of Producer
for a given AnnotatedMethod
or AnnotatedField
, and declaring bean, or throws an IllegalArgumentException
if there is a definition error associated with the producer method or field.
public <X> ProducerFactory<X> getProducerFactory(AnnotatedField<? super X> field, Bean<X> declaringBean);
public <X> ProducerFactory<X> getProducerFactory(AnnotatedMethod<? super X> method, Bean<X> declaringBean);
public interface ProducerFactory<X> {
public <T> Producer<T> createProducer(Bean<T> bean);
}
Null should be passed to ProducerFactory.createProducer()
to create a producer of non-contextual objects.
11.3.22. Obtaining an InjectionPoint
The method BeanManager.createInjectionPoint()
returns a container provided implementation of InjectionPoint
for a given AnnotatedField
or AnnotatedParameter
or throws an IllegalArgumentException
if there is a definition error associated with the injection point.
public InjectionPoint createInjectionPoint(AnnotatedField<?> field);
public InjectionPoint createInjectionPoint(AnnotatedParameter<?> parameter);
11.3.23. Obtaining a BeanAttributes
The method BeanManager.createBeanAttributes()
returns a container provided implementation of BeanAttributes
by reading the annotations of a given AnnotatedType
or AnnotatedMember
, according to the rules defined in Concepts, or throws an IllegalArgumentException
if there is a definition error associated with the declared bean attributes.
public <T> BeanAttributes<T> createBeanAttributes(AnnotatedType<T> type);
public BeanAttributes<?> createBeanAttributes(AnnotatedMember<?> member);
11.3.24. Obtaining a Bean
The method BeanManager.createBean()
returns a container provided implementation of Bean
. The methods accept:
-
a
BeanAttributes
, which determines the bean types, qualifiers, scope, name and stereotypes of the returnedBean
, and the return values ofisAlternative()
, and -
a class, which determines the return value of
Bean.getClass()
. -
an
InjectionTargetFactory
, which is used to obtain anInjectionTarget
. TheInjectionTarget
is used to create and destroy instances of the bean, to perform dependency injection and lifecycle callbacks, and which determines the return value ofBean.getInjectionPoints()
.
public <T> Bean<T> createBean(BeanAttributes<T> attributes, Class<T> beanClass,
InjectionTargetFactory<T> injectionTargetFactory);
A second version of the method is provided to create a Bean
from a producer.
The method accepts:
-
a
BeanAttributes
, which determines the bean types, qualifiers, scope, name and stereotypes of the returnedBean
, and the return values ofisAlternative()
, and -
a class, which determines the return value of
Bean.getClass()
. -
a
ProducerFactory
, which is used to obtain aProducer
. TheProducer
is used to create and destroy instances of the bean, and which determines the return value ofBean.getInjectionPoints()
.
public <T, X> Bean<T> createBean(BeanAttributes<T> attributes, Class<X> beanClass,
ProducerFactory<X> producer);
11.3.25. Obtaining the instance of an Extension
The method BeanManager.getExtension()
returns the container’s instance of an Extension
class declared in META-INF/services
, or throws an IllegalArgumentException
if the container has no instance of the given class.
public <T extends Extension> T getExtension(Class<T> extensionClass);
11.3.26. Obtain an InterceptionFactory
The method BeanManager.getInterceptionFactory()
returns an InterceptionFactory
for the provided type as defined in The InterceptionFactory
interface.
<T> InterceptionFactory<T> createInterceptionFactory(CreationalContext<T> ctx, Class<T> clazz);
If the actual type parameter of the method is not a Java class, non-portable behavior results.
11.3.27. Obtain an Instance
The method BeanManager.createInstance()
returns an Instance<Object>
to request bean instances programmatically as described in The Instance
interface.
The returned Instance
object can only access instances of beans that are available for injection in the module or library containing the class into which the BeanManager
was injected or the Java EE component from whose JNDI environment namespace the BeanManager
was obtained, according to the rules defined in Typesafe resolution.
Instance<Object> createInstance();
Instances of dependent scoped beans obtained with this Instance
object must be explicitly released by calling Instance.destroy()
method.
If no qualifier is passed to Instance.select()
method, the @Default
qualifier is assumed.
11.4. Alternative metadata sources
A portable extension may provide an alternative metadata source, such as configuration by XML.
The interfaces AnnotatedType
, AnnotatedField
, AnnotatedMethod
, AnnotatedConstructor
and AnnotatedParameter
in the package javax.enterprise.inject.spi
allow a portable extension to specify metadata that overrides the annotations that exist on a bean class.
The portable extension is responsible for implementing the interfaces, thereby exposing the metadata to the container.
In general, the behavior is as defined by the Java Language Specification, and only deviations from the Java Language Specification are noted.
The interface javax.enterprise.inject.spi.AnnotatedType
exposes the Class
object and members.
public interface AnnotatedType<X>
extends Annotated {
public Class<X> getJavaClass();
public Set<AnnotatedConstructor<X>> getConstructors();
public Set<AnnotatedMethod<? super X>> getMethods();
public Set<AnnotatedField<? super X>> getFields();
}
-
getConstructors()
returns all default-access, public, protected or private constructors declared for the type. -
getMethods()
returns all default-access, public, protected or private methods declared on the type and those declared on any supertypes. The container should callAnnotatedMethod.getJavaMember().getDeclaringClass()
to determine the type in the type hierarchy that declared the method. -
getFields()
returns all default-access, public, protected or private fields declared on the type and those declared on any supertypes. The container should callAnnotatedField.getJavaMember().getDeclaringClass()
to determine the type in the type hierarchy that declared the field.
When determining annotations on a type, the container must only consider the special inheritance rules defined for scope types in Inheritance of type-level metadata.
The interface javax.enterprise.inject.spi.AnnotatedField
exposes the Field
object.
public interface AnnotatedField<X>
extends AnnotatedMember<X> {
public Field getJavaMember();
}
The interface javax.enterprise.inject.spi.AnnotatedMethod
exposes the Method
object.
public interface AnnotatedMethod<X>
extends AnnotatedCallable<X> {
public Method getJavaMember();
}
The interface javax.enterprise.inject.spi.AnnotatedConstructor
exposes the Constructor
object.
public interface AnnotatedConstructor<X>
extends AnnotatedCallable<X> {
public Constructor<X> getJavaMember();
}
The interface javax.enterprise.inject.spi.AnnotatedParameter
exposes the position
of the parameter object and the declaring program element.
public interface AnnotatedParameter<X>
extends Annotated {
public int getPosition();
public AnnotatedCallable<X> getDeclaringCallable();
}
The interface javax.enterprise.inject.spi.AnnotatedMember
exposes the Member
object and the AnnotatedType
that defines the member.
public interface AnnotatedMember<X>
extends Annotated {
public Member getJavaMember();
public boolean isStatic();
public AnnotatedType<X> getDeclaringType();
}
The interface javax.enterprise.inject.spi.AnnotatedCallable
exposes the parameters of an invokable object.
CDI 1.1 deprecated the method AnnotatedMember.isStatic()
. The container should instead call AnnotatedMember.getJavaMember().getModifiers()
to determine if the member is static.
public interface AnnotatedCallable<X>
extends AnnotatedMember<X> {
public List<AnnotatedParameter<X>> getParameters();
}
The interface javax.enterprise.inject.spi.Annotated
exposes the overriding annotations and type declarations.
public interface Annotated {
Type getBaseType();
Set<Type> getTypeClosure();
<T extends Annotation> T getAnnotation(Class<T> annotationType);
<T extends Annotation> Set<T> getAnnotations(Class<T> annotationType);
Set<Annotation> getAnnotations();
boolean isAnnotationPresent(Class<? extends Annotation> annotationType);
}
-
getBaseType()
returns the type of the program element. -
getTypeClosure()
returns all types to which the base type should be considered assignable. -
getAnnotation(Class<T>)
returns the program element annotation of the given annotation type, or a null value. -
getAnnotations(Class<T>)
returns the program element annotations of the given annotation type, or an empty set. -
getAnnotations()
returns all annotations of the program element. -
isAnnotationPresent(Class<T>)
returnstrue
if the program element has an annotation of the given annotation type, orfalse
otherwise.
The container must use the operations of Annotated
and its subinterfaces to discover program element types and annotations.
The container must not directly call the Java Reflection API. In particular, the container must:
-
call
Annotated.getBaseType()
to determine the type of an injection point, event parameter or disposed parameter, -
call
Annotated.getTypeClosure()
to determine the bean types of any kind of bean, -
call
Annotated.getAnnotations()
to determine the scope, qualifiers, stereotypes and interceptor bindings of a bean, -
call
Annotated.isAnnotationPresent()
andAnnotated.getAnnotation()
to read any bean annotations defined by this specification, and -
call
AnnotatedType.getConstructors()
,AnnotatedType.getMethods()
andAnnotatedType.getFields()
to determine the members of a bean class.
11.4.1. AnnotatedTypeConfigurator
SPI
CDI 2.0 introduced a new SPI to help defining and creating instance for type metadata.
This SPI is composed of the following interfaces:
-
javax.enterprise.inject.spi.configurator.AnnotatedTypeConfigurator
to configure anAnnotatedType
-
javax.enterprise.inject.spi.configurator.AnnotatedFieldConfigurator
(defined inAnnotatedFieldConfigurator
) to configure anAnnotatedField
-
javax.enterprise.inject.spi.configurator.AnnotatedConstructorConfigurator
(defined inAnnotatedConstructorConfigurator
) to configure anAnnotatedConstructor
-
javax.enterprise.inject.spi.configurator.AnnotatedMethodConfigurator
(defined inAnnotatedMethodConfigurator
) to configure anAnnotatedMethod
-
javax.enterprise.inject.spi.configurator.AnnotatedParameterConfigurator
(defined inAnnotatedParameterConfigurator
) to configure anAnnotatedParameter
The container must provide an implementation for each of these interfaces.
AnnotatedTypeConfigurator
is the entry point for this SPI.
Implementation of AnnotatedTypeConfigurator
is returned by methods in the following lifecycle event:
-
BeforeBeanDiscovery
as defined inBeforeBeanDiscovery
event -
ProcessAnnotatedType
as defined inProcessAnnotatedType
event -
AfterTypeDiscovery
as defined inAfterTypeDiscovery
event
public interface AnnotatedTypeConfigurator<T> {
AnnotatedType<T> getAnnotated();
AnnotatedTypeConfigurator<T> add(Annotation annotation);
AnnotatedTypeConfigurator<T> remove(Predicate<Annotation> predicate);
AnnotatedTypeConfigurator<T> removeAll();
Set<AnnotatedMethodConfigurator<T>> methods();
Stream<AnnotatedMethodConfigurator<T>> filterMethods(Predicate<AnnotatedMethod<T>> predicate);
Set<AnnotatedFieldConfigurator<T>> fields();
Stream<AnnotatedFieldConfigurator<T>> filterFields(Predicate<AnnotatedField<T>> predicate);
Set<AnnotatedConstructorConfigurator<T>> constructors();
Stream<AnnotatedConstructorConfigurator<T>> filterConstructors(Predicate<AnnotatedConstructor<T>> predicate);
}
-
getAnnotated()
returns the originalAnnotatedType
with which this configurator was initialized -
add()
adds an annotation to the configured element -
remove()
removes annotations that match the specified predicate from the configured element -
removeAll()
removes all annotations from the configured element -
methods()
returns a set ofAnnotatedMethodConfigurator
to configure annotations on methods -
filterMethods()
returns aStream<AnnotatedMethodsConfigurator>
filtered by applying the provided Predicate onmethods()
-
fields()
returns a set ofAnnotatedFieldConfigurator
to configure annotations on fields -
filterFields()
returns aStream<AnnotatedFieldConfigurator>
filtered by applying the provided Predicate onfields()
-
constructors()
returns a set ofAnnotatedConstructorConfigurator
to configure annotations on constructors -
filterConstructors()
returns aStream<AnnotatedConstructorConfigurator>
filtered by applying the provided Predicate onConstructors()
11.4.1.1. AnnotatedMethodConfigurator
AnnotatedMethodConfigurator
is obtained through AnnotatedTypeConfigurator
as defined in AnnotatedTypeConfigurator
SPI
public interface AnnotatedMethodConfigurator<T> {
AnnotatedMethod<T> getAnnotated();
AnnotatedMethodConfigurator<T> add(Annotation annotation);
AnnotatedMethodConfigurator<T> remove(Predicate<Annotation> predicate);
AnnotatedMethodConfigurator<T> removeAll();
List<AnnotatedParameterConfigurator<T>> params();
Stream<AnnotatedParameterConfigurator<T>> filterParams(Predicate<AnnotatedParameter<T>> predicate);
}
-
getAnnotated()
returns the originalAnnotatedMethod
with which this configurator was initialized -
add()
adds an annotation to the configured element -
remove()
removes annotations that match the specified predicate from the configured element -
removeAll()
removes all annotations from the configured element -
params()
returns a list ofAnnotatedParameterConfigurator
to configure annotations on parameters. -
filterParams(Predicate<AnnotatedParameter<T>> predicate)
returns aStream<AnnotatedParameterConfigurator>
filtered by applying the provided Predicate onparams()
11.4.1.2. AnnotatedConstructorConfigurator
AnnotatedConstructorConfigurator
is obtained through AnnotatedTypeConfigurator
as defined in AnnotatedTypeConfigurator
SPI
public interface AnnotatedConstructorConfigurator<T> {
AnnotatedConstructor<T> getAnnotated();
AnnotatedConstructorConfigurator<T> add(Annotation annotation);
AnnotatedConstructorConfigurator<T> remove(Predicate<Annotation> predicate);
AnnotatedConstructorConfigurator<T> removeAll();
List<AnnotatedParameterConfigurator<T>> params();
Stream<AnnotatedParameterConfigurator<T>> filterParams(Predicate<AnnotatedParameter<T>> predicate);
}
-
getAnnotated()
returns the originalAnnotatedConstructor
with which this configurator was initialized -
add()
adds an annotation to the configured element -
remove()
removes annotations that match the specified predicate from the configured element -
removeAll()
removes all annotations from the configured element -
params()
returns a list ofAnnotatedParameterConfigurator
to configure annotations on parameters. -
filterParams(Predicate<AnnotatedParameter<T>> predicate)
returns aStream<AnnotatedParameterConfigurator>
filtered by applying the provided Predicate onparams()
11.4.1.3. AnnotatedParameterConfigurator
AnnotatedParameterConfigurator
is obtained through AnnotatedMethodConfigurator
(as defined in AnnotatedMethodConfigurator
) and AnnotatedConstructorConfigurator
as defined in AnnotatedConstructorConfigurator
.
public interface AnnotatedParameterConfigurator<T> {
AnnotatedParameter<T> getAnnotated();
AnnotatedParameterConfigurator<T> add(Annotation annotation);
AnnotatedParameterConfigurator<T> remove(Predicate<Annotation> predicate);
AnnotatedParameterConfigurator<T> removeAll();
}
-
getAnnotated()
returns the originalAnnotatedParameter
with which this configurator was initialized -
add()
adds an annotation to the configured element -
remove()
removes annotations that match the specified predicate from the configured element -
removeAll()
removes all annotations from the configured element
11.4.1.4. AnnotatedFieldConfigurator
AnnotatedFieldConfigurator
is obtained through AnnotatedTypeConfigurator
as defined in AnnotatedTypeConfigurator
SPI:
public interface AnnotatedFieldConfigurator<T> {
AnnotatedField<T> getAnnotated();
AnnotatedFieldConfigurator<T> add(Annotation annotation);
AnnotatedFieldConfigurator<T> remove(Predicate<Annotation> predicate);
AnnotatedFieldConfigurator<T> removeAll();
}
-
getAnnotated()
returns the originalAnnotatedField
with which this configurator was initialized -
add()
adds an annotation to the configured element -
remove()
removes annotations that match the specified predicate from the configured element -
removeAll()
removes all annotations from the configured element
11.5. Container lifecycle events
During the application initialization process, the container fires a series of events, allowing portable extensions to integrate with the container initialization process defined in Application initialization lifecycle. These events are fired synchronously.
Observer methods of these events must belong to extensions.
An extension is a service provider of the service javax.enterprise.inject.spi.Extension
declared in META-INF/services
.
public interface Extension {}
If any method on the event object is called outside of the observer method invocation, an IllegalStateException
is thrown.
Service providers may have observer methods, which may observe any event, including any container lifecycle event, and obtain an injected BeanManager
reference. Any decorators associated with BeanManager
will not be applied.
If other beans are injected into an extension’s observer methods, non-portable behavior results.
An extension may use BeanManager.fireEvent()
to deliver events to observer methods defined on extensions.
The container is not required to deliver events fired during application initialization to observer methods defined on beans.
The container instantiates a single instance of each extension at the beginning of the application initialization process and maintains a reference to it until the application shuts down. The container delivers event notifications to this instance by calling its observer methods.
If an extension declares a static observer method whose event parameter type:
-
is a container lifecycle event, or
-
is
java.lang.Object
and the event parameter has either no qualifiers or a single qualifier@Any
,
non-portable behavior results.
The notification order for observer methods within extensions follows the same ordering rule as defined in Observer ordering for non-extension observers.
The priority of an observer method may be declared using the @Priority
annotation.
void beforeBeanDiscovery(@Observes @Priority(javax.interceptor.Interceptor.Priority.LIBRARY_BEFORE) BeforeBeanDiscovery event) { ... }
For each service provider, the container must provide a bean of scope @ApplicationScoped
and qualifier @Default
, supporting injection of a reference to the service provider instance. The bean types of this bean include the class of the service provider and all superclasses and interfaces.
Lifecycle events described below can be grouped in to two categories:
-
Application lifecycle events, that are fired once:
-
BeforeBeanDiscovery
-
AfterTypeDiscovery
-
AfterBeanDiscovery
-
AfterDeploymentValidation
-
BeforeShutdown
-
-
Bean discovery events, that are fired multiple times:
-
ProcessAnnotatedType
-
ProcessInjectionPoint
-
ProcessInjectionTarget
-
ProcessBeanAttributes
-
ProcessBean
-
ProcessProducer
-
ProcessObserverMethod
-
Note that the chronological order of these events is specified in Application initialization lifecycle.
11.5.1. BeforeBeanDiscovery
event
The container must fire an event before it begins the type discovery process.
The event object must be of type javax.enterprise.inject.spi.BeforeBeanDiscovery
:
public interface BeforeBeanDiscovery {
public void addQualifier(Class<? extends Annotation> qualifier);
public void addQualifier(AnnotatedType<? extends Annotation> qualifier);
public void addScope(Class<? extends Annotation> scopeType, boolean normal, boolean passivating);
public void addStereotype(Class<? extends Annotation> stereotype, Annotation... stereotypeDef);
public void addInterceptorBinding(Class<? extends Annotation> bindingType, Annotation... bindingTypeDef);
public void addInterceptorBinding(AnnotatedType<? extends Annotation> bindingType);
public void addAnnotatedType(AnnotatedType<?> type);
public void addAnnotatedType(AnnotatedType<?> type, String id);
public AnnotatedTypeConfigurator<?> addAnnotatedType(Class<T> type,String id);
<T extends Annotation> AnnotatedTypeConfigurator<T> configureQualifier(Class<T> qualifier);
<T extends Annotation> AnnotatedTypeConfigurator<T> configureInterceptorBinding(Class<T> bindingType);
}
-
addQualifier()
declares an annotation type as a qualifier type. -
addScope()
declares an annotation type as a scope type. -
addStereotype()
declares an annotation type as a stereotype, and specifies its meta-annotations. -
addInterceptorBinding()
declares an annotation type as an interceptor binding type, and specifies its meta-annotations. -
addAnnotatedType()
adds a givenAnnotatedType
to the set of types which will be scanned during bean discovery, with an optional identifier. The first version of the method is deprecated since version 1.1 of Contexts and Dependency Injection.The third version of the method, returns a new
AnnotatedTypeConfigurator
as defined inAnnotatedTypeConfigurator
SPI to easily configure theAnnotatedType
which will be added at the end of the observer invocation. The returnedAnnotatedTypeConfigurator
is initialized with type and annotations of the provided class. -
configureQualifier()
returns a newAnnotatedTypeConfigurator
as defined inAnnotatedTypeConfigurator
SPI to configure a newAnnotatedType
and declares it as a qualifier type. -
configureInterceptorBinding()
returns a newAnnotatedTypeConfigurator
as defined inAnnotatedTypeConfigurator
SPI to configure a newAnnotatedType
and declares it as an interceptor binding.
void beforeBeanDiscovery(@Observes BeforeBeanDiscovery event) { ... }
If any observer method of the BeforeBeanDiscovery
event throws an exception, the exception is treated as a definition error by the container.
If any BeforeBeanDiscovery
method is called outside of the observer method invocation, an IllegalStateException
is thrown.
11.5.2. AfterTypeDiscovery
event
The container must fire an event when it has fully completed the type discovery process and before it begins the bean discovery process.
The event object must be of type javax.enterprise.inject.spi.AfterTypeDiscovery
.
public interface AfterTypeDiscovery {
public List<Class<?>> getAlternatives();
public List<Class<?>> getInterceptors();
public List<Class<?>> getDecorators();
public void addAnnotatedType(AnnotatedType<?> type, String id);
public AnnotatedTypeConfigurator<?> addAnnotatedType(Class<T> type,String id);
}
-
getAlternatives()
returns the ordered list of enabled alternatives for the application, sorted by priority in ascending order. Alternatives enabled for a bean archive are not included in the list. -
getInterceptors()
returns the ordered list of enabled interceptors for the application, sorted by priority in ascending order. Interceptors enabled for a bean archive are not included in the list. -
getDecorators()
returns the ordered list of enabled decorators for the application, sorted by priority in ascending order. Decorators enabled for a bean archive are not included in the list. -
addAnnotatedType()
adds a givenAnnotatedType
to the set of types which will be scanned during bean discovery, with an identifier.The second version of the method, returns a new
AnnotatedTypeConfigurator
as defined inAnnotatedTypeConfigurator
SPI to easily configure theAnnotatedType
which will be added at the end of observer invocation. The returnedAnnotatedTypeConfigurator
is initialized with type and annotations of the provided class.
If an alternative, interceptor or decorator is added using AfterTypeDiscovery.addAnnotatedType()
, non-portable behavior results.
Any observer of this event is permitted to add classes to, or remove classes from, the list of alternatives, list of interceptors or list of decorators.
The container must use the final values of these collections, after all observers of AfterTypeDiscovery
have been called, to determine the order of the enabled alternatives, interceptors, and decorators for application.
The initial values of these collections are defined by the @Priority
annotation.
void afterTypeDiscovery(@Observes AfterTypeDiscovery event) { ... }
If any observer method of a AfterTypeDiscovery
event throws an exception, the exception is treated as a definition error by the container.
If any AfterTypeDiscovery
method is called outside of the observer method invocation, an IllegalStateException
is thrown.
11.5.3. AfterBeanDiscovery
event
The container must fire an event when it has fully completed the bean discovery process, validated that there are no definition errors relating to the discovered beans, and registered Bean
and ObserverMethod
objects for the discovered beans.
The event object must be of type javax.enterprise.inject.spi.AfterBeanDiscovery
:
public interface AfterBeanDiscovery {
public void addDefinitionError(Throwable t);
public void addBean(Bean<?> bean);
public BeanConfigurator<?> addBean();
public void addObserverMethod(ObserverMethod<?> observerMethod);
public ObserverMethodConfigurator<?> addObserverMethod();
public void addContext(Context context);
public <T> AnnotatedType<T> getAnnotatedType(Class<T> type, String id);
public <T> Iterable<AnnotatedType<T>> getAnnotatedTypes(Class<T> type);
}
-
addDefinitionError()
registers a definition error with the container, causing the container to abort deployment after all observers have been notified. -
addBean()
fires an event of typeProcessSyntheticBean
containing the givenBean
and then registers theBean
with the container, thereby making it available for injection into other beans. The givenBean
may implementInterceptor
orDecorator
.The second version of the method, returns a new
BeanConfigurator
as defined inBeanConfigurator
interface to easily configure theBean
which will be added at the end of observer invocation. If the container is unable to process the configurator it automatically detects the problem and treats it as a deployment problem. -
addObserverMethod()
fires an event of typeProcessSyntheticObserverMethod
containing the givenObserverMethod
and then registers theObserverMethod
with the container, thereby making it available for event notifications.If the given
ObserverMethod
does not override eitherObserverMethod.notify(T)
orObserverMethod.notify(EventContext<T>)
, the container automatically detects the problem and treats it as a definition error.The second version of the method, returns a new
ObserverMethodConfigurator
as defined inObserverMethodConfigurator
interface to easily configure theObserverMethod
which will be added at the end of observer invocation. If the container is unable to process the configurator it automatically detects the problem and treats it as a deployment problem. -
addContext()
registers a customContext
object with the container. -
getAnnotatedType()
andgetAnnotatedTypes()
returns theAnnotatedType
s discovered or added during container initialization. The id of anAnnotatedType
added by the container is not defined. If theid
passed is null, the container should substitute the container generated id.
A portable extension may take advantage of this event to register beans, interceptors, decorators, observer methods and custom context objects with the container.
void afterBeanDiscovery(@Observes AfterBeanDiscovery event, BeanManager manager) { ... }
If any observer method of the AfterBeanDiscovery
event throws an exception, the exception is treated as a definition error by the container.
If any AfterBeanDiscovery
method is called outside of the observer method invocation, an IllegalStateException
is thrown.
11.5.3.1. BeanConfigurator
interface
CDI 2.0 introduced the javax.enterprise.inject.spi.configurator.BeanConfigurator
interface to help configuring a new Bean
instance.
With BeanConfigurator
you can perform all the operations defined in BeanAttributesConfigurator
interface plus the following:
-
Initialize the bean metadata with one of its
read()
methods. It can be done from an existingBeanAttributes
or by reading metadata on a givenAnnotatedType
, according to the rules defined in Concepts. -
Set the class of the bean with
beanClass
method. -
Add an injection point for the bean with
addInjectionPoint
method. -
Add multiple injection points for the bean with
addInjectionPoints
methods. -
Replace all injection points for the bean with
injectionPoints
methods. -
Make the bean implements
PassivationCapable
and set its id withid
method. -
Set a callback to create a bean instance with
createWith()
orproduceWith()
method. -
Set a callback to destroy a bean instance with
destroyWith()
ordisposeWith()
method.
If a BeanConfigurator
has no scope specified, the default scope rules, defined in Default scope, apply.
11.5.3.2. ObserverMethodConfigurator
interface
CDI 2.0 introduced the javax.enterprise.inject.spi.configurator.ObserverMethodConfigurator
interface to help configuring an ObserverMethod
instance.
With ObserverMethodConfigurator
you can perform the following operations:
-
Read the observer metadata from a
java.lang.reflect.Method
,AnnotatedMethod
or an existingObserverMethod
with one of itsread()
methods. -
Set the
ObserverMethod
bean class withbeanClass
method. -
Set the type of the observed event with
observedType
method. -
Add a qualifier with
addQualifier
method. -
Set or add multiple qualifiers with
addQualifiers
andqualifiers
methods. -
Set the
Reception
type with reception method. -
Set the
TransactionPhase
type withtransactionPhase
method. -
Set the priority with
priority
method. -
Define the
EventConsumer
to call on notification withnotifyWith
method. -
Make the observer asynchronous with
async
method.
11.5.4. AfterDeploymentValidation
event
The container must fire an event after it has validated that there are no deployment problems and before creating contexts or processing requests.
The event object must be of type javax.enterprise.inject.spi.AfterDeploymentValidation
:
public interface AfterDeploymentValidation {
public void addDeploymentProblem(Throwable t);
}
-
addDeploymentProblem()
registers a deployment problem with the container, causing the container to abort deployment after all observers have been notified.
void afterDeploymentValidation(@Observes AfterDeploymentValidation event, BeanManager manager) { ... }
If any observer method of the AfterDeploymentValidation
event throws an exception, the exception is treated as a deployment problem by the container.
If any AfterDeploymentValidation
method is called outside of the observer method invocation, an IllegalStateException
is thrown.
The container must not allow any request to be processed by the deployment until all observers of this event return.
11.5.5. BeforeShutdown
event
The container must fire a final event after it has finished processing requests and destroyed all contexts.
The event object must be of type javax.enterprise.inject.spi.BeforeShutdown
:
public interface BeforeShutdown {}
void beforeShutdown(@Observes BeforeShutdown event, BeanManager manager) { ... }
If any observer method of the BeforeShutdown
event throws an exception, the exception is ignored by the container.
11.5.6. ProcessAnnotatedType
event
The container must fire an event, before it processes a type, for every Java class, interface (excluding annotation type, a special kind of interface type) or enum discovered as defined in Type discovery.
An event is not fired for any type annotated with @Vetoed
, or in a package annotated with @Vetoed
.
The event object must be of type javax.enterprise.inject.spi.ProcessAnnotatedType<X>
, where X
is the class, for types discovered in a bean archive, or of type javax.enterprise.inject.spi.ProcessSyntheticAnnotatedType<X>
for types added by BeforeBeanDiscovery.addAnnotatedType()
or AfterTypeDiscovery.addAnnotatedType()
.
The annotation @WithAnnotations
may be applied to the event parameter.
If the annotation is applied, the container must only deliver ProcessAnnotatedType
events for types which contain at least one of the annotations specified.
The annotation can appear on the annotated type, or on any member, or any parameter of any member of the annotated type, as defined in Alternative metadata sources.
The annotation may be applied as a meta-annotation on any annotation considered.
If the @WithAnnotations
annotation is applied to any other event parameter, the container automatically detects the problem and treats it as a definition error.
public interface ProcessAnnotatedType<X> {
public AnnotatedType<X> getAnnotatedType();
public void setAnnotatedType(AnnotatedType<X> type);
public AnnotatedTypeConfigurator<X> configureAnnotatedType();
public void veto();
}
interface ProcessSyntheticAnnotatedType<X> extends ProcessAnnotatedType<X> {
public Extension getSource();
}
-
getAnnotatedType()
returns theAnnotatedType
object that will be used by the container to read the declared annotations. -
setAnnotatedType()
replaces theAnnotatedType
. -
configureAnnotatedType()
returns anAnnotatedTypeConfigurator
(as defined inAnnotatedTypeConfigurator
SPI) initialized with theAnnotatedType
processed by the event to easily configure theAnnotatedType
which will be used to replace the original one at the end of observer invocation. The method always returns the sameAnnotatedTypeConfigurator
-
veto()
forces the container to ignore the type. -
getSource()
returns theExtension
instance that added the annotated type.
Any observer of this event is permitted to wrap and/or replace the AnnotatedType
by calling either setAnnotatedType()
or configureAnnotatedType()
.
If both methods are called within an observer notification an IllegalStateException
is thrown.
The container must use the final value of this property, after all observers have been called, as the only source of types and annotations for the program elements.
For example, the following observer decorates the AnnotatedType
for every class that is discovered by the container.
<T> void decorateAnnotatedType(@Observes ProcessAnnotatedType<T> pat) {
pat.setAnnotatedType( decorate( pat.getAnnotatedType() ) );
}
If any observer method of a ProcessAnnotatedType
event throws an exception, the exception is treated as a definition error by the container.
If any ProcessAnnotatedType
method is called outside of the observer method invocation, an IllegalStateException
is thrown.
11.5.7. ProcessInjectionPoint
event
The container must fire an event for every injection point of every bean, interceptor or decorator.
The event object must be of type javax.enterprise.inject.spi.ProcessInjectionPoint<T, X>
where T
is the bean class, and X
is the declared type of the injection point.
public interface ProcessInjectionPoint<T, X> {
public InjectionPoint getInjectionPoint();
public void setInjectionPoint(InjectionPoint injectionPoint);
public InjectionPointConfigurator configureInjectionPoint();
public void addDefinitionError(Throwable t);
}
-
getInjectionPoint()
returns theInjectionPoint
object that will be used by the container to perform injection. -
setInjectionPoint()
replaces theInjectionPoint
. -
configureInjectionPoint()
returns anInjectionPointConfigurator
(as defined inInjectionPointConfigurator
interface) initialized with theInjectionPoint
processed by the event to easily configure theInjectionPoint
which will be used to replace the original one at the end of observer invocation. The method always returns the sameInjectionPointConfigurator
. -
addDefinitionError()
registers a definition error with the container, causing the container to abort deployment after bean discovery is complete.
Any observer of this event is permitted to wrap and/or replace the InjectionPoint
by calling either setInjectionPoint()
or configureInjectionPoint()
.
If both methods are called within an observer notification an IllegalStateException
is thrown.
The container must use the final value of this property, after all observers have been called, whenever it performs injection upon the injection point.
If any observer method of a ProcessInjectionPoint
event throws an exception, the exception is treated as a definition error by the container.
If any ProcessInjectionPoint
method is called outside of the observer method invocation, an IllegalStateException
is thrown.
11.5.7.1. InjectionPointConfigurator
interface
CDI 2.0 introduced the javax.enterprise.inject.spi.configurator.InjectionPointConfigurator
interface to help configure an existing InjectionPoint
instance.
With InjectionPointConfigurator
you can perform the following operations:
-
Set the type of
InjectionPoint
withtype
method. -
Add a qualifier with
addQualifier
method. -
Set or add multiple qualifiers with
addQualifiers
andqualifiers
methods. -
Make the injection point delegate with
delegate
method. -
Make the injection point a transient field with
transientField
method.
11.5.8. ProcessInjectionTarget
event
The container must fire an event for every bean, interceptor or decorator.
The event object must be of type javax.enterprise.inject.spi.ProcessInjectionTarget<X>
, where X
is the bean class.
public interface ProcessInjectionTarget<X> {
public AnnotatedType<X> getAnnotatedType();
public InjectionTarget<X> getInjectionTarget();
public void setInjectionTarget(InjectionTarget<X> injectionTarget);
public void addDefinitionError(Throwable t);
}
-
getAnnotatedType()
returns theAnnotatedType
representing the bean class. -
getInjectionTarget()
returns theInjectionTarget
object that will be used by the container to perform injection. -
setInjectionTarget()
replaces theInjectionTarget
. -
addDefinitionError()
registers a definition error with the container, causing the container to abort deployment after bean discovery is complete.
Any observer of this event is permitted to wrap and/or replace the InjectionTarget
. The container must use the final value of this property, after all observers have been called, whenever it performs injection upon the managed bean.
If any observer method of a ProcessInjectionTarget
event throws an exception, the exception is treated as a definition error by the container.
If any ProcessInjectionTarget
method is called outside of the observer method invocation, an IllegalStateException
is thrown.
11.5.9. ProcessBeanAttributes
event
The container must fire an event for each managed bean, producer, interceptor or decorator deployed in a bean archive, before registering the Bean
object.
No event is fired for any:
-
@New
qualified bean, defined in@New
qualified beans, or, -
beans added programmatically using
AfterBeanDiscovery.addBean()
, or, -
for any built-in beans.
The event object must be of type javax.enterprise.inject.spi.ProcessBeanAttributes<T>
where T
is the bean class of the bean, the return type of the producer method, or the type of the producer field.
Resources are considered to be producer fields.
public interface ProcessBeanAttributes<T> {
public Annotated getAnnotated();
public BeanAttributes<T> getBeanAttributes();
public void setBeanAttributes(BeanAttributes<T> beanAttributes);
public BeanAttributesConfigurator<T> configureBeanAttributes();
public void addDefinitionError(Throwable t);
public void veto();
public void ignoreFinalMethods();
}
-
getAnnotated()
returns theAnnotatedType
representing the bean class, theAnnotatedMethod
representing the producer field, or theAnnotatedField
representing the producer field. -
getBeanAttributes()
returns theBeanAttributes
object that will be used by the container to manage instances of the bean. -
setBeanAttributes()
replaces theBeanAttributes
. -
configureBeanAttributes()
returns aBeanAttributesConfigurator
(as defined inBeanAttributesConfigurator
interface) initialized with theBeanAttributes
processed by the event to easily configure theBeanAttributes
which will be used to replace the original one at the end of observer invocation. The method always returns the sameBeanAttributesConfigurator
. -
addDefinitionError()
registers a definition error with the container, causing the container to abort deployment after bean discovery is complete. -
veto()
forces the container to ignore the bean. -
ignoreFinalMethods()
Instructs the container to ignore all non-static, final methods with public, protected or default visibility declared on any bean type of the specific bean during validation of injection points that require proxyable bean type. These method should never be invoked upon bean instances. Otherwise, unpredictable behavior results. It will bypass standard rules defined in Unproxyable bean types.
Any observer of this event is permitted to wrap and/or replace the BeanAttributes
by calling either setBeanAttributes()
or configureBeanAttributes()
.
If both methods are called within an observer notification an IllegalStateException
is thrown.
The container must use the final value of this property, after all observers have been called, to manage instances of the bean.
Changes to BeanAttributes
are not propagated to the annotated type from which the bean definition was created.
Any bean which has its bean attributes altered must have it’s definition validated during deployment validation.
If any observer method of a ProcessBeanAttributes
event throws an exception, the exception is treated as a definition error by the container.
If any ProcessBeanAttributes
method is called outside of the observer method invocation, an IllegalStateException
is thrown.
11.5.9.1. BeanAttributesConfigurator
interface
CDI 2.0 introduced the javax.enterprise.inject.spi.configurator.BeanAttributesConfigurator
interface to help configuring a new BeanAttributes
instance.
BeanAttributesConfigurator
is obtainable during ProcessBeanAttributes
event and is therefore automatically initialized from existing BeanAttributes
.
With BeanAttributesConfigurator
you can perform the following operations :
-
Add type with
addType
oraddTransitiveTypeClosure
methods. -
Set multiple types with
types
methods. -
Set scope with
scope
method. -
Add a qualifier with
addQualifier
method. -
Set or add multiple qualifiers with
addQualifiers
andqualifiers
methods. -
Add a stereotype with
addStereotype
method. -
Set or add multiple stereotypes with
addStereotypes
andstereotypes
methods. -
Set the bean name
name
method. -
Make the bean an alternative with
alternative
methods.
11.5.10. ProcessBean
event
The container must fire an event for each bean, interceptor or decorator deployed in a bean archive, after firing the ProcessBeanAttributes
for the bean and before registering the Bean
object.
No event is fired for any @New
qualified bean, defined in @New
qualified beans.
The event object type in the package javax.enterprise.inject.spi
depends upon what kind of bean was discovered:
-
For a managed bean with bean class
X
, the container must raise an event of typeProcessManagedBean<X>
. -
For a producer method with method return type
T
of a bean with bean classX
, the container must raise an event of typeProcessProducerMethod<T, X>
. -
For a producer field with field type
T
of a bean with bean classX
, the container must raise an event of typeProcessProducerField<T, X>
. -
For a custom implementation of
Bean
, the container must raise an event of typeProcessSyntheticBean<X>
.
The interface javax.enterprise.inject.spi.ProcessBean
is a supertype of all these event types:
public interface ProcessBean<X> {
public Annotated getAnnotated();
public Bean<X> getBean();
public void addDefinitionError(Throwable t);
}
-
getAnnotated()
returns theAnnotatedType
representing the bean class, theAnnotatedMethod
representing the producer method, or theAnnotatedField
representing the producer field. If invoked upon aProcessSyntheticBean
event, non-portable behavior results and the returned value should be ignored. -
getBean()
returns theBean
object that is about to be registered. TheBean
may implementInterceptor
orDecorator
. -
addDefinitionError()
registers a definition error with the container, causing the container to abort deployment after bean discovery is complete.
public interface ProcessManagedBean<X>
extends ProcessBean<X> {
public AnnotatedType<X> getAnnotatedBeanClass();
}
public interface ProcessProducerMethod<T, X>
extends ProcessBean<X> {
public AnnotatedMethod<T> getAnnotatedProducerMethod();
public AnnotatedParameter<T> getAnnotatedDisposedParameter();
}
public interface ProcessProducerField<T, X>
extends ProcessBean<X> {
public AnnotatedField<T> getAnnotatedProducerField();
public AnnotatedParameter<T> getAnnotatedDisposedParameter();
}
public interface ProcessSyntheticBean<X>
extends ProcessBean<X> {
public Extension getSource();
}
If any observer method of a ProcessBean
event throws an exception, the exception is treated as a definition error by the container.
If any ProcessBean
method is called outside of the observer method invocation, an IllegalStateException
is thrown.
11.5.11. ProcessProducer
event
The container must fire an event for each producer method or field of each bean, including resources.
The event object must be of type javax.enterprise.inject.spi.ProcessProducer<T, X>
, where T
is the bean class of the bean that declares the producer method or field and X
is the return type of the producer method or the type of the producer field.
public interface ProcessProducer<T, X> {
public AnnotatedMember<T> getAnnotatedMember();
public Producer<X> getProducer();
public void setProducer(Producer<X> producer);
public ProducerConfigurator<X> configureProducer();
public void addDefinitionError(Throwable t);
}
-
getAnnotatedMember()
returns theAnnotatedField
representing the producer field or theAnnotatedMethod
representing the producer method. -
getProducer()
returns theProducer
object that will be used by the container to call the producer method or read the producer field. -
setProducer()
replaces theProducer
. -
configureProducer()
returns aProducerConfigurator
(as defined inProducerConfigurator
interface) initialized with theProducer
processed by this event to configure theProducer
that will replace the original one at the end of the observer invocation. Each call returns the same configurator instance within an observer notification. -
addDefinitionError()
registers a definition error with the container, causing the container to abort deployment after bean discovery is complete.
Any observer of this event is permitted to wrap and/or replace the Producer
by calling either setProducer()
or configureProducer()
.
If both methods are called within an observer notification an IllegalStateException
is thrown.
The container must use the final value of this property, after all observers have been called, whenever it calls the producer or disposer.
For example, this observer decorates the Producer
for all producer methods and fields of type EntityManager
.
void decorateEntityManager(@Observes ProcessProducer<?, EntityManager> pp) {
pit.setProducer( decorate( pp.getProducer() ) );
}
If any observer method of a ProcessProducer
event throws an exception, the exception is treated as a definition error by the container.
If any ProcessProducer
method is called outside of the observer method invocation, an IllegalStateException
is thrown.
11.5.11.1. ProducerConfigurator
interface
CDI 2.0 introduced the javax.enterprise.inject.spi.configurator.ProducerConfigurator
interface to help configuring a Producer
instance.
With ProducerConfigurator
you can perform the following operations:
-
Set a callback to produce a new instance with
produceWith()
method. -
Set a callback to destroy the produced instance with
disposeWith()
method.
11.5.12. ProcessObserverMethod
event
The container must fire an event for each observer method of each enabled bean, before registering the ObserverMethod
object.
The event object must be of type javax.enterprise.inject.spi.ProcessObserverMethod<T, X>
, where T
is the observed event type of the observer method and X
is the bean class of the bean that declares the observer method.
For a custom implementation of javax.enterprise.inject.spi.ObserverMethod
, the container must raise an event of type javax.enterprise.inject.spi.ProcessSyntheticObserverMethod<T, X>
, where T
is the observed event type of the observer method and X
is the return value of ObserverMethod.getBeanClass()
.
public interface ProcessObserverMethod<T, X> {
public AnnotatedMethod<X> getAnnotatedMethod();
public ObserverMethod<T> getObserverMethod();
public void addDefinitionError(Throwable t);
public void setObserverMethod(ObserverMethod<T> observerMethod);
public ObserverMethodConfigurator<T> setObserverMethod();
public void veto();
}
public interface ProcessSyntheticObserverMethod<T, X> extends ProcessObserverMethod<T, X> {
public Extension getSource();
}
-
getAnnotatedMethod()
returns theAnnotatedMethod
representing the observer method. If invoked upon aProcessSyntheticObserverMethod
event, non-portable behavior results and the returned value should be ignored. -
getObserverMethod()
returns theObserverMethod
object that will be used by the container to call the observer method. -
addDefinitionError()
registers a definition error with the container, causing the container to abort deployment after bean discovery is complete. -
setObserverMethod()
replaces theObserverMethod
. -
configureObserverMethod()
returns anObserverMethodConfigurator
(as defined inObserverMethodConfigurator
interface) initialized with theObserverMethod
processed by the event to easily configure theObserverMethod
which will be used to replace the original one at the end of observer invocation. The method always returns the sameObserverMethodConfigurator
. -
veto()
forces the container to ignore theObserverMethod
. -
getSource()
returns theExtension
instance that added the observer method.
Any observer of this event is permitted to wrap and/or replace the ObserverMethod
by calling either setObserverMethod()
or configureObserverMethod()
.
If both methods are called within an observer notification an IllegalStateException
is thrown.
The container must use the final value of this property, after all observers have been called, whenever it performs observer resolution.
If any observer method of a ProcessObserverMethod
event throws an exception, the exception is treated as a definition error by the container.
If any ProcessObserverMethod
method is called outside of the observer method invocation, an IllegalStateException
is thrown.
11.6. Configurators interfaces
CDI 2.0 introduced the following Configurators interface:
-
AnnotatedTypeConfigurator
SPI forAnnotatedType
configuration -
InjectionPointConfigurator
interface forInjectionPoint
configuration -
BeanAttributesConfigurator
interface forBeanAttributes
configuration -
BeanConfigurator
interface forBean
configuration -
ObserverMethodConfigurator
interface forObserverMethod
configuration -
ProducerConfigurator
interface forProducer
configuration
The container must provide implementation for all these configurators and make them available in matching container lifecycle events as defined in Container lifecycle events.
11.7. The InterceptionFactory
interface
CDI 2.0 introduces the javax.enterprise.inject.spi.InterceptionFactory<T>
interface, which allows to create a wrapper instance whose method invocations are intercepted by method interceptors and forwarded to a provided instance.
public interface InterceptionFactory<T> {
InterceptionFactory<T> ignoreFinalMethods();
AnnotatedTypeConfigurator<T> configure();
T createInterceptedInstance(T instance);
}
-
ignoreFinalMethods()
instructs the container to ignore all non-static, final methods with public, protected or default visibility declared by any class in the type hierarchy of the intercepted instance during invocation ofcreateInterceptedInstance()
method. Ignored methods should never be invoked upon the wrapper instance. Otherwise, unpredictable behavior results. -
configure()
returns anAnnotatedTypeConfigurator
(as defined inAnnotatedTypeConfigurator
SPI) initialized with theAnnotatedType
created either for the class passed toBeanManager.createInterceptionFactory(CreationalContext, Class)
or derived from theInterceptionFactory
parameter injection point. The method always return the sameAnnotatedTypeConfigurator
-
createInterceptedInstance()
returns a wrapper instance whose method invocations are intercepted by method interceptors and forwarded to a provided instance. The method can be only called once, subsequent calls will throw anIllegalStateException
. If the type of the instance is not proxyable as defined in Unproxyable bean types anUnproxyableResolutionException
exception is thrown. This rule can be loosen by callingignoreFinalMethods()
before this method. If the provided instance is an internal container construct (such as client proxy), non-portable behavior results.
An InterceptionFactory
can be obtained be calling BeanManager.createInterceptionFactory()
as defined in Obtain an InterceptionFactory
.
The container must provide a built-in bean with scope @Dependent
, bean type InterceptionFactory
and qualifier @Default
.
If an injection point of type InterceptionFactory
and qualifier @Default
exists and is not a parameter of a producer method, the container automatically detects the problem and treats it as a definition error.
If an injection point of type InterceptionFactory
has a type parameter that is not a Java class, non-portable behavior results.
The following example demonstrates a producer method definition using InterceptionFactory
. The produced bean instance will be a wrapper of Product
with single interceptor associated by ActionBinding
:
@Produces
@RequestScoped
public Product createInterceptedProduct(InterceptionFactory<Product> interceptionFactory) {
interceptionFactory.configure().add(ActionBinding.Literal.INSTANCE);
return interceptionFactory.createInterceptedInstance(new Product());
}
12. Packaging and deployment
When an application is started, the container must perform bean discovery, detect definition errors and deployment problems and raise events that allow portable extensions to integrate with the deployment lifecycle.
Bean discovery is the process of determining:
-
The bean archives that exist in the application, and the beans they contain
-
Which alternatives, interceptors and decorators are enabled for each bean archive
-
The ordering of enabled interceptors and decorators
Additional beans may be registered programmatically with the container by the application or a portable extension after the automatic bean discovery completes.
Portable extensions may even integrate with the process of building the Bean
object for a bean, to enhance the container’s built-in functionality.
12.1. Bean archives
Bean classes of enabled beans must be deployed in bean archives.
A bean archive has a bean discovery mode of all
, annotated
or none
. A bean archive which contains a beans.xml
file with no version has a default bean discovery mode of all
. A bean archive which contains a beans.xml
file with version 1.1 (or later) must specify the bean-discovery-mode
attribute. The default value for the attribute is annotated
.
An archive which:
-
contains a
beans.xml
file with thebean-discovery-mode
ofnone
, or, -
contains an extension and no
beans.xml
file
is not a bean archive.
An explicit bean archive is an archive which contains a beans.xml
file:
-
with a version number of
1.1
(or later), with thebean-discovery-mode
ofall
, or, -
with no version number, or,
-
that is an empty file.
An implicit bean archive is any other archive which contains one or more bean classes with a bean defining annotation as defined in Bean defining annotations.
When determining which archives are bean archives, the container must consider:
-
Library jars
-
Directories in the JVM classpath
Non Java EE containers may or may not provide support for war, EJB jar or rar bean archives.
The beans.xml
file must be named:
-
META-INF/beans.xml
.
For compatibility with Contexts and Dependency 1.0, products must contain an option to cause an archive to be ignored by the container when no beans.xml
is present.
The container searches for beans in all bean archives in the application classpath.
If a bean class is deployed in two different bean archives, non-portable behavior results. Portable applications must deploy each bean class in no more than one bean archive.
Explicit bean archives may contain classes which are not deployed as beans.
For example a bean archive might contain an abstract class not annotated with @Decorator
.
Implicit bean archives are likely to contain classes which are not deployed as beans.
An extension may be deployed in any archive, including those that are not bean archives.
12.2. Application initialization lifecycle
When an application is started, the container performs the following steps:
-
First, the container must search for service providers for the service
javax.enterprise.inject.spi.Extension
defined in Container lifecycle events, instantiate a single instance of each service provider, and search the service provider class for observer methods of initialization events. -
Next, the container must fire an event of type
BeforeBeanDiscovery
, as defined inBeforeBeanDiscovery
event. -
Next, the container must perform type discovery, as defined in Type discovery.
-
Next, the container must fire an event of type
AfterTypeDiscovery
, as defined inAfterTypeDiscovery
event. -
Next, the container must perform bean discovery, as defined in Bean discovery.
-
Next, the container must fire an event of type
AfterBeanDiscovery
, as defined inAfterBeanDiscovery
event, and abort initialization of the application if any observer registers a definition error. -
Next, the container must detect deployment problems by validating bean dependencies and specialization and abort initialization of the application if any deployment problems exist, as defined in Problems detected automatically by the container.
-
Next, the container must fire an event of type
AfterDeploymentValidation
, as defined inAfterDeploymentValidation
event, and abort initialization of the application if any observer registers a deployment problem. -
Finally, the container begins directing requests to the application.
12.3. Application shutdown lifecycle
When an application is stopped, the container performs the following steps:
-
First, the container must destroy all contexts.
-
Finally, the container must fire an event of type
BeforeShutdown
, as defined inBeforeShutdown
event.
12.4. Type and Bean discovery
The container automatically discovers managed beans (according to the rules of Which Java classes are managed beans?) in bean archives and searches the bean classes for producer methods, producer fields, disposer methods and observer methods.
12.4.1. Type discovery
First the container must discover types. The container discovers:
-
each Java class, interface (excluding the special kind of interface declaration annotation type) or enum deployed in an explicit bean archive, and
-
each Java class with a bean defining annotation in an implicit bean archive.
that is not excluded from discovery by an exclude filter as defined in Exclude filters.
Then, for every type discovered the container must create an AnnotatedType
representing the type and fire an event of type ProcessAnnotatedType
, as defined in ProcessAnnotatedType
event.
If an extension calls BeforeBeanDiscovery.addAnnotatedType()
or AfterTypeDiscovery.addAnnotatedType()
, the type passed must be added to the set of discovered types and the container must fire an event of type ProcessSyntheticAnnotatedType
for every type added, as defined in ProcessAnnotatedType
event+
12.4.2. Exclude filters
Exclude filters are defined by <exclude>
elements in the beans.xml
for the bean archive as children of the <scan>
element.
By default an exclude filter is active. If the exclude filter definition contains:
-
a child element named
<if-class-available>
with aname
attribute, and the classloader for the bean archive can not load a class for that name, or -
a child element named
<if-class-not-available>
with aname
attribute, and the classloader for the bean archive can load a class for that name, or -
a child element named
<if-system-property>
with aname
attribute, and there is no system property defined for that name, or -
a child element named
<if-system-property>
with aname
attribute and avalue
attribute, and there is no system property defined for that name with that value.
then the filter is inactive.
If the filter is active, and:
-
the fully qualified name of the type being discovered matches the value of the name attribute of the exclude filter, or
-
the package name of the type being discovered matches the value of the name attribute with a suffix ".*" of the exclude filter, or
-
the package name of the type being discovered starts with the value of the name attribute with a suffix ".**" of the exclude filter
then we say that the type is excluded from discovery.
For example, consider the follow beans.xml
file:
<?xml version="1.0" encoding="UTF-8"?>
beans xmlns="http://xmlns.jcp.org/xml/ns/javaee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://xmlns.jcp.org/xml/ns/javaee http://xmlns.jcp.org/xml/ns/javaee/beans_2_0.xsd" bean-discovery-mode="all" version="2.0">
<scan>
<exclude name="com.acme.rest.*" />
<exclude name="com.acme.faces.**">
<if-class-not-available name="javax.faces.context.FacesContext"/>
</exclude>
<exclude name="com.acme.verbose.*">
<if-system-property name="verbosity" value="low"/>
</exclude>
<exclude name="com.acme.ejb.**">
<if-class-available name="javax.enterprise.inject.Model"/>
<if-system-property name="exclude-ejbs"/>
</exclude>
</scan>
</beans>
The first exclude filter will exclude all classes in com.acme.rest
package. The second exclude filter will exclude all classes in the com.acme.faces
package, and any subpackages, but only if JSF is not available. The third exclude filter will exclude all classes in the com.acme.verbose
package if the system property verbosity
has the value low
. The fourth exclude filter will exclude all classes in the com.acme.ejb
package, and any subpackages if the system property exclude-ejbs
is set (with any value) and at the same time, the javax.enterprise.inject.Model
class is available to the classloader.
12.4.3. Trimmed bean archive
An explicit bean archive may be marked as 'trimmed' by adding the <trim />
element to its beans.xml
file:
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://xmlns.jcp.org/xml/ns/javaee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://xmlns.jcp.org/xml/ns/javaee http://xmlns.jcp.org/xml/ns/javaee/beans_2_0.xsd" bean-discovery-mode="all" version="2.0">
<trim/>
</beans>
If an explicit bean archive contains the <trim/>
element in its beans.xml
file, types that don’t have either a bean defining annotation (as defined in Bean defining annotations) or any scope annotation, are removed from the set of discovered types.
12.4.4. Bean discovery
For every type in the set of discovered types (as defined in Type discovery), the container must:
-
inspect the type metadata to determine if it is a bean, and then
-
detect definition errors by validating the class and its metadata, and then
-
if the class is a managed bean, fire an event of type
ProcessInjectionPoint
for each injection point in the class, as defined inProcessInjectionPoint
event, and then -
if the class is a managed bean, fire an event of type
ProcessInjectionTarget
, as defined inProcessInjectionTarget
event, and then -
determine which alternatives, interceptors and decorators are enabled, according to the rules defined in Enabled and disabled beans, Interceptor enablement and ordering and Decorator enablement and ordering, and then
-
if the class is an enabled bean, interceptor or decorator, fire an event of type
ProcessBeanAttributes
, as defined inProcessBeanAttributes
event, and then -
if the class is an enabled bean, interceptor or decorator and if
ProcessBeanAttributes.veto()
wasn’t called in previous step, fire an event which is a subtype ofProcessBean
, as defined inProcessBean
event.
For each enabled bean, the container must search the class for producer methods and fields, as defined in Producer methods and in Producer fields, including resources, and for each producer:
-
if it is a producer method, fire an event of type
ProcessInjectionPoint
for each injection point in the method parameters, as defined inProcessInjectionPoint
event, and then -
fire an event of type
ProcessProducer
, as defined inProcessProducer
event, and then -
if the producer method or field is enabled, fire an event of type
ProcessBeanAttributes
, as defined inProcessBeanAttributes
event, and then -
if the producer method or field is enabled and if
ProcessBeanAttributes.veto()
wasn’t called in previous step, fire an event which is a subtype ofProcessBean
, as defined inProcessBean
event.
For each enabled bean, the container must search for disposer methods as defined in Disposer methods, and for each disposer method:
-
fire an event of type
ProcessInjectionPoint
for each injection point in the method parameters, as defined inProcessInjectionPoint
event.
For each enabled bean, the container must search the class for observer methods, and for each observer method:
-
fire an event of type
ProcessInjectionPoint
for each injection point in the method parameters, as defined inProcessInjectionPoint
event, and then -
fire an event of type
ProcessObserverMethod
, as defined inProcessObserverMethod
event.
Then, the container registers the Bean
and ObserverMethod
objects:
-
For each enabled bean that is not an interceptor or decorator, the container registers an instance of the
Bean
interface defined in TheBean
interface. -
For each enabled interceptor, the container registers an instance of the
Interceptor
interface defined in TheInterceptor
interface. -
For each enabled decorator, the container registers an instance of the
Decorator
interface defined in TheDecorator
interface. -
For each observer method of every enabled bean, the container registers an instance of the
ObserverMethod
interface defined in TheObserverMethod
interface.
Part II - CDI in Java SE
This part of the document specifies additional rules and features when using CDI in Java SE. All content defined in Part I - Core CDI applies to this part.
13. Bootstrapping a CDI container in Java SE
In Java SE, the CDI container must be explicitly bootstrapped by the user.
This is performed by the SeContainerInitializer
abstract class and its static method newInstance()
.
SeContainerInitializer
is a ServiceProvider
of the service javax.enterprise.inject.se.SeContainerInitializer
declared in META-INF/services.
This class allows a user to configure the CDI container before it is bootstrapped.
The SeContainerInitializer.initialize()
method bootstraps the container and returns a SeContainer
instance.
User can shutdown the container manually by calling the close()
method on SeContainer
or automatically using try-with-resources since SeContainer
extends AutoCloseable
interface.
13.1. SeContainerInitializer
class
CDI container can be configured and bootstrapped from javax.enterprise.inject.se.SeContainerInitializer
abstract class.
A CDI implementation is required to provide an implementation of SeContainerInitializer
declared as a service provider.
Static method newInstance()
uses Java service provider mechanism to obtain an implementation of SeContainerInitializer
and return an instance of it.
There must be exactly one provider available, otherwise an IllegalStateException is thrown.
SeContainerInitializer
configuration allows explicit addition of elements to the set of automatically discovered elements.
These additions are done in an internal synthetic bean archive that is added to the set of bean archives discovered by the container during deployment.
This synthetic bean archive behaves like an explicit bean archive (as defined in Bean archives).
public abstract class SeContainerInitializer {
public static SeContainerInitializer newInstance() { ... }
public SeContainerInitializer addBeanClasses(Class<?>... classes);
public SeContainerInitializer addPackages(Class<?>... packageClasses);
public SeContainerInitializer addPackages(boolean scanRecursively, Class<?>... packageClasses);
public SeContainerInitializer addPackages(Package... packages);
public SeContainerInitializer addPackages(boolean scanRecursively, Package... packages);
public SeContainerInitializer addExtensions(Extension... extensions);
public SeContainerInitializer addExtensions(Class<? extends Extension>... extensions);
public SeContainerInitializer enableInterceptors(Class<?>... interceptorClasses);
public SeContainerInitializer enableDecorators(Class<?>... decoratorClasses);
public SeContainerInitializer selectAlternatives(Class<?>... alternativeClasses);
public SeContainerInitializer selectAlternativeStereotypes(Class<? extends Annotation>... alternativeStereotypeClasses);
public SeContainerInitializer addProperty(String key, Object value);
public SeContainerInitializer setProperties(Map<String, Object> properties);
public SeContainerInitializer disableDiscovery();
public SeContainerInitializer setClassLoader(ClassLoader classLoader);
public SeContainer initialize();
}
Unless specified differently each method of SeContainerInitializer
returns the current SeContainerInitializer
object.
-
newInstance()
static method returns an instance of the implementation ofSeContainerInitializer
discovered by Java service provider. Each call returns a new instance ofSeContainerInitializer
. This method throwsIllegalStateException
if called in Java EE container. -
addBeanClasses()
adds classes to the the synthetic bean archive -
addPackages()
adds packages content to the synthetic bean archive. There are other versions of this method, which enables user to add a package according to class or classes it contains and also to add packages recursively. -
addExtensions()
adds the provided extensions (class or instance) to the synthetic bean archive. -
enableInterceptors()
adds interceptor classes to the list of enabled interceptors for the synthetic bean archive. -
enableDecorators()
adds decorator classes to the list of enabled decorators for the synthetic bean archive. -
selectAlternatives()
adds alternatives classes to the list of selected alternatives for the synthetic bean archive. -
selectAlternativeStereotypes()
adds alternative stereotype classes to the list of selected alternative stereotypes for the synthetic bean archive. -
addProperty()
adds a configuration property to the container -
setProperties()
sets theMap
of configuration properties for the container. Original propertiesMap
is replaced by a new instance. -
disableDiscovery()
deactivates automatic type scanning and discovery. All bean archives will be ignored except the implicit bean archive. -
setClassLoader()
changes the default class loader for the container -
initialize()
bootstraps the container and returns aSeContainer
as defined inSeContainer
interface.
Every invocation of the SeContainerInitializer.initialize()
method returns a new SeContainer
instance.
The application context is started automatically by the container on start up.
An implementation does not need to support multiple calls of SeContainerInitializer.initialize()
method when the SeContainer
is running.
13.2. SeContainer
interface
The javax.enterprise.inject.se.SeContainer
interface provides access to the BeanManager
and programmatic lookup as defined in The Instance
interface.
SeContainer
also extends AutoCloseable
, so when dereferenced, it should shutdown automatically.
public interface SeContainer extends Instance<Object>,AutoCloseable {
void close();
boolean isRunning();
BeanManager getBeanManager();
}
-
close()
method explicitly shuts down the container. If it is called and the container was already shutdown, it throws anIllegalStateException
. -
isRunning()
method returnstrue
if called before container shuts down andfalse
after. -
getBeanManager()
method returns theBeanManager
(as defined in TheBeanManager
object) for the running container. If it is called and the container was already shutdown, it throws anIllegalStateException
.
SeContainer implements javax.enterprise.inject.Instance
and therefore might be used to perform programmatic lookup as defined in The Instance
interface.
If no qualifier is passed to SeContainer.select()
method, the @Default
qualifier is assumed.
If any Instance.select()
method is called and the container was already shutdown, the IllegalStateException
is thrown.
The following code examples demonstrate the options of handling container shutdown:
public static void main(String... args) {
SeContainerInitializer containerInit = SeContainerInitializer.newInstance();
SeContainer container = containerInit.initialize();
// retrieve a bean and do work with it
MyBean myBean = container.select(MyBean.class).get();
myBean.doWork();
// when done
container.close();
}
public static void main(String... args) {
try(SeContainer container = SeContainerInitializer.newInstance().initialize()) {
// start the container, retrieve a bean and do work with it
MyBean myBean = container.select(MyBean.class).get();
myBean.doWork();
}
// shuts down automatically after the try with resources block.
}
14. Scopes and contexts in Java SE
14.1. Context management for built-in scopes in Java SE
When running in Java SE, the container must extend the rules defined in Context management for built-in scopes and is also required to ensure the following rules for built-in context implementation.
14.1.1. Application context lifecycle in Java SE
When running in Java SE the container must extend the rules defined in Application context lifecycle and is also required to ensure the following rules.
The application scope is active:
-
during any method invocation
The application context is shared between all method invocations that execute within the same container.
The application context is destroyed when the container is shut down.
The payload of the event fired when the application context is initialized or destroyed is:
-
any
java.lang.Object
.
15. Packaging and deployment in Java SE
15.1. Bean archive in Java SE
When running in Java SE, the container must extend the rules defined in Bean archives and also ensure that :
An archive which doesn’t contain a beans.xml file can’t be discovered as an implicit bean archive unless:
-
the application is launched with system property
javax.enterprise.inject.scan.implicit
set totrue
, or -
the container was initialized with a map containing an entry parameter with
javax.enterprise.inject.scan.implicit
as key andBoolean.TRUE
as value.
16. Portable extensions in Java SE
16.1. The BeanManager
object in Java SE
16.1.1. Obtaining a reference to the CDI container in Java SE
In Java SE, while the access to CDI container and BeanManager
described in Obtaining a reference to the CDI container is available, the preferred way to access them is through SeContainer
interface as described in SeContainer
interface.
Part III - CDI in Java EE
This part of the document, specifies additional rules or features when using CDI in a Java EE container. All content defined in Part I - Core CDI applies to this part.
17. Extended Concepts for Java EE
When running in Java EE, the container must extend the concepts defined in Concepts with:
-
A Java EE component is a bean if the lifecycle of its instances may be managed by the container according to the lifecycle context model defined in Scopes and contexts
-
Contextual instances of a bean may be used in EL expressions that are evaluated in the same context
-
For some Java EE components - like environment resources, defined in Resources - the developer provides only the annotations and the bean implementation is provided by the container.
17.1. Functionality provided by the container to the bean in Java EE
When running in Java EE, the container must extend the capabilities defined in Functionality provided by the container to the bean, by providing:
-
scoped resolution by bean name when used in a Unified EL expression, as defined by Name resolution.
17.2. Bean types for Java EE component
As managed beans, EJB session beans may have multiple bean types depending on their client-visible types.
For instance, this session bean has only the local interfaces BookShop
and Auditable
, along with Object
, as bean types, since the bean class is not a client-visible type.
@Stateful
public class BookShopBean
extends Business
implements BookShop, Auditable {
...
}
The rules for determining the (unrestricted) set of bean types for Java EE components are defined in Bean types of a session bean and Bean types of a resource.
17.3. Scopes
Java EE components such as servlets, EJBs and JavaBeans do not have a well-defined scope. These components are either:
-
singletons, such as EJB singleton session beans, whose state is shared between all clients,
-
stateless objects, such as servlets and stateless session beans, which do not contain client-visible state, or
-
objects that must be explicitly created and destroyed by their client, such as JavaBeans and stateful session beans, whose state is shared by explicit reference passing between clients.
CDI scopes add to Java EE these missing well-defined lifecycle context as defined in Scopes.
17.4. Default bean discovery mode for Java EE
When running in Java EE, If the bean discovery mode is annotated
, the container must extend the rules defined in Default bean discovery mode with:
-
bean classes of EJB sessions beans, are discovered, and
-
producer methods that are on an EJB session bean are discovered, and
-
producer fields that are on an EJB session bean are discovered, and
-
disposer methods that are on an EJB session bean are discovered, and
-
observer methods that are on an EJB session bean are discovered.
17.5. Bean names in Java EE
A bean with a name may be referred to by its name in Unified EL expressions.
There is no relationship between the bean name of an EJB session bean and the EJB name of the bean.
Bean names allow the direct use of beans in JSP or JSF pages, as defined in Integration with Unified EL.
For example, a bean with the name products
could be used like this:
<h:outputText value="#{products.total}"/>
17.5.1. Default bean names for EJB session beans
In the circumstances listed in Default bean names, the rule for determining default name for an EJB session bean are defined in Default bean name for a session bean.
18. Addition to programming model for Java EE
When running in Java EE, the container must extend the rules defined in Programming model, and must also provide built-in support for injection and contextual lifecycle management of the following kinds of bean:
-
Session beans
-
Resources (Java EE resources, persistence contexts, persistence units, remote EJBs and web services)
Java EE and embeddable EJB containers are required by the Java EE and EJB specifications to support EJB session beans and the Java EE component environment. Other containers are not required to provide support for injection or lifecycle management of session beans or resources.
18.1. Managed beans in Java EE
18.1.1. Which Java classes are managed beans in Java EE?
When running in Java EE, A top-level Java class is a managed bean if it meets requirements described in Which Java classes are managed beans? or if it is defined to be a managed bean by any other Java EE specification and if
-
It is not annotated with an EJB component-defining annotation or declared as an EJB bean class in
ejb-jar.xml
.
18.2. EJB Session beans
A session bean is a bean that is implemented by a session bean with an EJB 3.x client view that is not annotated with @Vetoed
or in a package annotated @Vetoed
. The basic lifecycle and semantics of EJB session beans are defined by the EJB specification.
A stateless session bean must belong to the @Dependent
pseudo-scope. A singleton session bean must belong to either the @ApplicationScoped
scope or to the @Dependent
pseudo-scope. If a session bean specifies an illegal scope, the container automatically detects the problem and treats it as a definition error.
A stateful session bean may have any scope.
When a contextual instance of a session bean is obtained via the dependency injection service, the behavior of SessionContext.getInvokedBusinessInterface()
is specific to the container implementation.
Portable applications should not rely upon the value returned by this method.
If the bean class of a session bean is annotated @Interceptor
or @Decorator
, the container automatically detects the problem and treats it as a definition error.
If the session bean class is a generic type, it must have scope @Dependent
. If a session bean with a parameterized bean class declares any scope other than @Dependent
, the container automatically detects the problem and treats it as a definition error.
18.2.1. EJB remove methods of session beans
If a session bean is a stateful session bean:
-
If the scope is
@Dependent
, the application may call any EJB remove method of a contextual instance of the session bean. -
Otherwise, the application may not directly call any EJB remove method of any contextual instance of the session bean.
The session bean is not required to have an EJB remove method in order for the container to destroy it.
If the application directly calls an EJB remove method of a contextual instance of a session bean that is a stateful session bean and declares any scope other than @Dependent
, an UnsupportedOperationException
is thrown.
If the application directly calls an EJB remove method of a contextual instance of a session bean that is a stateful session bean and has scope @Dependent
then no parameters are passed to the method by the container.
Furthermore, the container ignores the instance instead of destroying it when Contextual.destroy()
is called, as defined in Lifecycle of EJB stateful session beans.
18.2.2. Bean types of a session bean
The unrestricted set of bean types for a session bean contains all local interfaces of the bean and their superinterfaces.
If the session bean has a no-interface view, the unrestricted set of bean types contains the bean class and all superclasses.
In addition, java.lang.Object
is a bean type of every session bean.
Remote interfaces are not included in the set of bean types.
The resulting set of bean types for a session bean consists only of legal bean types, all other types are removed from the set of bean types.
18.2.3. Declaring a session bean
A session bean does not require any special annotations apart from the component-defining annotation (or XML declaration) required by the EJB specification. The following EJBs are beans:
@Singleton
class Shop { .. }
@Stateless
class PaymentProcessorImpl implements PaymentProcessor { ... }
A bean class may also specify a scope, bean name, stereotypes and/or qualifiers:
@ConversationScoped @Stateful @Default @Model
public class ShoppingCart { ... }
A session bean class may extend another bean class:
@Stateless
@Named("loginAction")
public class LoginActionImpl implements LoginAction { ... }
@Stateless
@Mock
@Named("loginAction")
public class MockLoginActionImpl extends LoginActionImpl { ... }
18.2.4. Specializing a session bean
If a bean class of a session bean X is annotated @Specializes
, then the bean class of X must directly extend the bean class of another session bean Y.
Then X directly specializes Y, as defined in Specialization.
If the bean class of X does not directly extend the bean class of another session bean, the container automatically detects the problem and treats it as a definition error.
For example, MockLoginActionBean
directly specializes LoginActionBean
:
@Stateless
public class LoginActionBean implements LoginAction { ... }
@Stateless @Mock @Specializes
public class MockLoginActionBean extends LoginActionBean implements LoginAction { ... }
18.3. Producer methods on EJB session bean
A producer method defined in an EJB session bean follows the rules defined in Producer methods with the following addition:
-
A producer method defined in an EJB session bean must be either a business method exposed by a local business interface of the EJB or a static method of the bean class.
18.3.1. Declaring a producer method in an EJB session bean
A producer method declaration in an EJB session bean follows the rules defined in Declaring a producer method with the following addition:
-
if a non-static method of a session bean class is annotated
@Produces
, and the method is not a business method exposed by a local business interface of the session bean, the container automatically detects the problem and treats it as a definition error.
18.4. Producer field on EJB session bean
A producer field defined in an EJB session bean follows the rules defined in Producer fields with the following addition:
-
A producer field defined in an EJB session bean must be a static field of the bean class.
18.4.1. Declaring a producer field in an EJB session bean
A producer field declaration in an EJB session bean follows the rules defined in Declaring a producer field with the following addition:
-
If a non-static field of an EJB session bean class is annotated
@Produces
, the container automatically detects the problem and treats it as a definition error.
18.5. Disposer methods on EJB session bean
A disposer method defined in an EJB session bean follows the rules defined in Disposer methods with the following addition:
-
A disposer method defined in an EJB session bean must be either a business method exposed by a local business interface of the EJB or a static method of the bean class.
18.5.1. Declaring a disposer method on an EJB session bean
A disposer method declaration in an EJB session bean follows the rules defined in Declaring a disposer method with the following addition:
-
If a non-static method of an EJB session bean class has a parameter annotated
@Disposes
, and the method is not a business method exposed by a local business interface of the session bean, the container automatically detects the problem and treats it as a definition error.
18.6. Java EE components
Most Java EE components support injection and interception, as defined in the Java Platform, Enterprise Edition Specification 7, table EE.5-1, but are not considered beans (as defined by this specification). EJBs, as defined in EJB Session beans are the exception.
The instance used by the container to service an invocation of a Java EE component will not be the same instance obtained when using @Inject
, instantiated by the container to invoke a producer method, observer method or disposer method, or instantiated by the container to access the value of a producer field.
It is recommended that Java EE components should not define observer methods, producer methods, producer fields or disposer methods.
It is safe to annotate Java EE components with @Vetoed
to prevent them being considered beans.
18.7. Resources
A resource is a bean that represents a reference to a resource, persistence context, persistence unit, remote EJB or web service in the Java EE component environment.
By declaring a resource, we enable an object from the Java EE component environment to be injected by specifying only its type and qualifiers at the injection point.
For example, if @CustomerDatabase
is a qualifier:
@Inject @CustomerDatabase Datasource customerData;
@Inject @CustomerDatabase EntityManager customerDatabaseEntityManager;
@Inject @CustomerDatabase EntityManagerFactory customerDatabaseEntityManagerFactory;
@Inject PaymentService remotePaymentService;
The container is not required to support resources with scope other than @Dependent
. Portable applications should not define resources with any scope other than @Dependent
.
A resource may not have a bean name.
18.7.1. Declaring a resource
A resource may be declared by specifying a Java EE component environment injection annotation as part of a producer field declaration. The producer field may be static.
-
For a Java EE resource,
@Resource
must be specified. -
For a persistence context,
@PersistenceContext
must be specified. -
For a persistence unit,
@PersistenceUnit
must be specified. -
For a remote EJB,
@EJB
must be specified. -
For a web service,
@WebServiceRef
must be specified.
The injection annotation specifies the metadata needed to obtain the resource, entity manager, entity manager factory, remote EJB instance or web service reference from the component environment.
@Produces @WebServiceRef(lookup="java:app/service/PaymentService")
PaymentService paymentService;
@Produces @EJB(ejbLink="../their.jar#PaymentService")
PaymentService paymentService;
@Produces @Resource(lookup="java:global/env/jdbc/CustomerDatasource")
@CustomerDatabase Datasource customerDatabase;
@Produces @PersistenceContext(unitName="CustomerDatabase")
@CustomerDatabase EntityManager customerDatabasePersistenceContext;
@Produces @PersistenceUnit(unitName="CustomerDatabase")
@CustomerDatabase EntityManagerFactory customerDatabasePersistenceUnit;
The bean type and qualifiers of the resource are determined by the producer field declaration.
If the producer field declaration specifies a bean name, the container automatically detects the problem and treats it as a definition error.
If the matching object in the Java EE component environment is not of the same type as the producer field declaration, the container automatically detects the problem and treats it as a definition error.
18.7.2. Bean types of a resource
The unrestricted set of bean types for a resource is determined by the declared type of the producer field, as specified by Bean types of a producer field.
The resulting set of bean types for a resource consists only of legal bean types, all other types are removed from the set of bean types.
18.8. Additional built-in beans
A Java EE or embeddable EJB container must provide the following built-in beans, all of which have qualifier @Default
:
-
a bean with bean type
javax.transaction.UserTransaction
, allowing injection of a reference to the JTAUserTransaction
, and -
a bean with bean type
java.security.Principal
, allowing injection of aPrincipal
representing the current caller identity.
A servlet container must provide the following built-in beans, all of which have qualifier @Default
:
-
a bean with bean type
javax.servlet.http.HttpServletRequest
, allowing injection of a reference to theHttpServletRequest
-
a bean with bean type
javax.servlet.http.HttpSession
, allowing injection of a reference to theHttpSession
, -
a bean with bean type
javax.servlet.ServletContext
, allowing injection of a reference to theServletContext
,
These beans are passivation capable dependencies, as defined in Passivation capable dependencies.
If a Java EE component class has an injection point of type UserTransaction
and qualifier @Default
, and may not validly make use of the JTA UserTransaction
according to the Java EE platform specification, the container automatically detects the problem and treats it as a definition error.
18.9. Injected fields in Java EE
When running in Java EE, the container must extend the rules defined for bean classes in Injected fields to Java EE component classes supporting injection.
18.10. Initializer methods in Java EE
When running in Java EE, the container must extend the rules defined for bean classes in Initializer methods to Java EE component classes supporting injection. The container must also ensure that:
-
An initializer method defined in an EJB session bean is not required to be a business method of the session bean.
18.11. @New
qualified beans in Java EE
When running in Java EE, the container must extend the rules defined for managed beans in @New
qualified beans to EJB session beans.
18.12. Inheritance of type-level metadata in Java EE
When running in Java EE, the container must extend the rules defined for managed beans in Inheritance of type-level metadata to EJB session beans.
18.13. Inheritance of member-level metadata in Java EE
When running in Java EE, the container must extend the rules defined for managed beans in Inheritance of member-level metadata to EJB session beans.
18.14. Specialization in Java EE
18.14.1. Direct and indirect specialization in Java EE
When running in Java EE, the container must extend the rules defined in Inheritance of member-level metadata and is also required to support specialization for EJB session beans as defined in Specializing a session bean.
19. Dependency injection, lookup and EL in Java EE
When running in Java EE, the container must extend the rules defined in Dependency injection and lookup and may also provide references to contextual instances by Unified EL expression evaluation.
When resolving a name in an EL expression, the container considers the bean name and selected alternatives.
19.1. Modularity in Java EE
In the Java EE module architecture, any Java EE module or library is a module. The Java EE module is a bean archive if it contains a beans.xml
file, as defined in Bean archives.
When running in Java EE, the container must follow the same accessibility rules for beans and alternatives defined in Modularity for JSP/JSF pages using EL resolution and make sure that only beans available from injection in the module that defines the JSP/JSF pages are resolved.
In the Java EE module architecture, a bean class is accessible in a module if and only if it is required to be accessible according to the class loading requirements defined by the Java EE platform specification.
Note that, in some Java EE implementations, a bean class might be accessible to some other class even when this is not required by the Java EE platform specification. For the purposes of this specification, a class is not considered accessible to another class unless accessibility is explicitly required by the Java EE platform specification.
An alternative is not available for injection, lookup or EL resolution to classes or JSP/JSF pages in a module unless the module is a bean archive and the alternative is explicitly selected for the bean archive or the application.
19.1.1. Declaring selected alternatives for an application in Java EE
When running in Java EE, the container must extend the rules defined for managed beans in Declaring selected alternatives for an application to EJB session beans.
19.1.2. Declaring selected alternatives for a bean archive in Java EE
When running in Java EE, the container must extend the rules defined for managed beans in Declaring selected alternatives for a bean archive to EJB session beans.
19.1.3. Unsatisfied and ambiguous dependencies in Java EE
When running in Java EE, the container must extend the rules defined in Unsatisfied and ambiguous dependencies and must also validate all injection points of all Java EE component classes supporting injection
19.2. EL name resolution
When running in Java EE, the container must extend the rules defined in Name resolution and must also support name resolution for name used in Expression Language
An EL name resolves to a bean if:
-
the name can be resolved to a bean according to rules in Name resolution, and
-
the bean is available for injection in the war containing the JSP or JSF page with the EL expression.
19.2.1. Ambiguous EL names
When running in Java EE, the container must extend the rules defined in Ambiguous names to names used in Expression Language.
19.3. Dependency injection in Java EE
When running in Java EE, the container must extend the rules defined in Dependency injection and is also required to perform dependency injection whenever it creates the following contextual objects:
-
contextual instances of EJB session beans.
The container is also required to perform dependency injection whenever it instantiates any of the following non-contextual objects:
-
non-contextual instances of EJB session beans (for example, session beans obtained by the application from JNDI or injected using
@EJB
), and -
instances of any other Java EE component class supporting injection.
A Java EE 5 container is not required to support injection for non-contextual objects.
19.3.1. Injection using the bean constructor in Java EE
When running in Java EE, the container must extend the rules defined for managed beans in Injection using the bean constructor to EJB session beans.
19.3.2. Injection of fields and initializer methods in Java EE
When running in Java EE, the container must extend the rules defined for managed beans in Injection of fields and initializer methods to EJB session beans and to any other Java EE component class supporting injection.
The container is also required to ensure that:
-* Initializer methods declared by a class X in the type hierarchy of the bean are called after all Java EE component environment resource dependencies declared by X or by superclasses of X have been injected.
-* Any @PostConstruct
callback declared by a class X in the type hierarchy of the bean is called after all Java EE component environment resource dependencies declared by X or by superclasses of X have been injected.
-* Any servlet init()
method is called after all initializer methods have been called, all injected fields have been initialized and all Java EE component environment resource dependencies have been injected.
19.3.3. Destruction of dependent objects in Java EE
When running in Java EE, the container must extend the rules defined for managed beans in Destruction of dependent objects to any other Java EE component class supporting injection and perform destruction after the servlet destroy()
method is called.
19.3.4. Bean metadata in Java EE
Interceptor and decorator instances associated with Java EE components that are not considered beans (as defined by this specification) cannot obtain information about the beans they intercept and decorate (as defined in Bean metadata) and thus null
is injected into relevant injection points.
20. Scopes and contexts in Java EE
20.1. Dependent pseudo-scope in Java EE
When running in Java EE, the container must extend the rules defined in Dependent pseudo-scope and must also ensure that if a bean is declared to have @Dependent
scope:
-
When a Unified EL expression in a JSF or JSP page that refers to the bean by its bean name is evaluated, at most one instance of the bean is instantiated. This instance exists to service just a single evaluation of the EL expression. It is reused if the bean name appears multiple times in the EL expression, but is never reused when the EL expression is evaluated again, or when another EL expression is evaluated.
20.1.1. Dependent objects in Java EE
When running in Java EE, the container must extend the rules defined for bean in Dependent objects to Java EE component class instance.
20.1.2. Destruction of objects with scope @Dependent
in Java EE
When running in Java EE, the container must extend the rules defined for bean in Destruction of objects with scope @Dependent
to Java EE component class instance, and must also ensure that :
-
all
@Dependent
scoped contextual instances created during evaluation of a Unified EL expression in a JSP or JSF page are destroyed when the evaluation completes.
20.1.3. Dependent pseudo-scope and Unified EL
Suppose a Unified EL expression in a JSF or JSP page refers to a bean with scope @Dependent
by its bean name. Each time the EL expression is evaluated:
-
the bean is instantiated at most once, and
-
the resulting instance is reused for every appearance of the bean name, and
-
the resulting instance is destroyed when the evaluation completes.
Portable extensions that integrate with the container via Unified EL should also ensure that these rules are enforced.
20.2. Passivation and passivating scopes in Java EE
20.2.1. Passivation capable beans in Java EE
-
As defined by the EJB specification, an EJB stateful session beans is passivation capable if:
-
interceptors and decorators of the bean are passivation capable, and,
-
the EJB stateful session bean does not have the
passivationCapable
flag set tofalse
.
-
-
As defined by the EJB specification, an EJB stateless session bean or an EJB singleton session bean is not passivation capable.
20.2.2. Passivation capable dependencies in java EE
When running in Java EE, the container must extend the rules defined in Passivation capable dependencies, and must also guarantee that:
-
all EJB stateless session beans are passivation capable dependencies,
-
all EJB singleton session beans are passivation capable dependencies,
-
all passivation capable EJB stateful session beans are passivation capable dependencies, and
-
all Java EE resources are passivation capable dependencies.
20.2.3. Validation of passivation capable beans and dependencies in Java EE
When running in Java EE, the container must extend the rules defined for managed beans in Validation of passivation capable beans and dependencies to EJB session beans.
20.3. Context management for built-in scopes in Java EE
When running in Java EE, the container must extend the rules defined in Context management for built-in scopes and is also required to ensure the following rules for built-in context implementation.
The built-in request and application context objects are active during servlet, web service and EJB invocations, and the built in session and request context objects are active during servlet and web service invocations.
20.3.1. Request context lifecycle in Java EE
When running in Java EE the container must extend the rules defined in Request context lifecycle and is also required to implement request context with the following rules.
The request context is active:
-
during the
service()
method of any servlet in the web application, during thedoFilter()
method of any servlet filter and when the container calls anyServletRequestListener
orAsyncListener
, -
during any Java EE web service invocation,
-
during any remote method invocation of any EJB, during any asynchronous method invocation of any EJB, during any call to an EJB timeout method and during message delivery to any EJB message-driven bean.
The request context is destroyed:
-
at the end of the servlet request, after the
service()
method, alldoFilter()
methods, and allrequestDestroyed()
andonComplete()
notifications return, -
after the web service invocation completes,
-
after the EJB remote method invocation, asynchronous method invocation, timeout or message delivery completes if it did not already exist when the invocation occurred.
The payload of the event fired when the request context is initialized or destroyed is:
-
the
ServletRequest
if the context is initialized or destroyed due to a servlet request, or -
the
ServletRequest
if the context is initialized or destroyed due to a web service invocation, or -
any
java.lang.Object
for other types of request.
20.3.2. Session context lifecycle in Java EE
When running in Java EE the container is required to implement session context with the following rules.
The session scope is active:
-
during the
service()
method of any servlet in the web application, during thedoFilter()
method of any servlet filter and when the container calls anyHttpSessionListener
,AsyncListener
orServletRequestListener
.
The session context is shared between all servlet requests that occur in the same HTTP session.
The session context is destroyed when the HTTPSession
times out, after all HttpSessionListener
s have been called, and at the very end of any request in which invalidate()
was called, after all filters and ServletRequestListener
s have been called.
An event with qualifier @Initialized(SessionScoped.class)
is synchronously fired when the session context is initialized.
An event with qualifier @BeforeDestroyed(SessionScoped.class)
is synchronously fired when the session context is about to be destroyed, i.e. before the actual destruction.
An event with qualifier @Destroyed(SessionScoped.class)
is synchronously fired when the session context is destroyed, i.e. after the actual destruction.
The event payload is javax.servlet.http.HttpSession
.
20.3.3. Application context lifecycle in Java EE
When running in Java EE the container must extend the rules defined in Application context lifecycle and is also required to implement application context with the following rules.
The application scope is active:
-
during the
service()
method of any servlet in the web application, during thedoFilter()
method of any servlet filter and when the container calls anyServletContextListener
,HttpSessionListener
,AsyncListener
orServletRequestListener
, -
during any Java EE web service invocation,
-
during any asynchronous invocation of an event observer,
-
during any remote method invocation of any EJB, during any asynchronous method invocation of any EJB, during any call to an EJB timeout method and during message delivery to any EJB message-driven bean,
-
when the disposer method or
@PreDestroy
callback of any bean with any normal scope other than@ApplicationScoped
is called, and -
during
@PostConstruct
callback of any bean.
The application context is shared between all servlet requests, web service invocations, asynchronous invocation of an event observer, EJB remote method invocations, EJB asynchronous method invocations, EJB timeouts and message deliveries to message-driven beans that execute within the same application. The application context is destroyed when the application is shut down.
The payload of the event fired when the application context is initialized or destroyed is:
-
the
ServletContext
if the application is a web application deployed to a Servlet container, or -
any
java.lang.Object
for other types of application.
20.3.4. Conversation context lifecycle in Java EE
When running in Java EE the container is required to implement conversation context with the following rules.
The conversation scope is active during all Servlet requests.
An event with qualifier @Initialized(ConversationScoped.class)
is synchronously fired when the conversation context is initialized.
An event with qualifier @BeforeDestroyed(ConversationScoped.class)
is synchronously fired when the conversation is about to be destroyed, i.e. before the actual destruction.
An event with qualifier @Destroyed(ConversationScoped.class)
is synchronously fired when the conversation is destroyed, i.e. after the actual destruction.
The event payload is:
-
the conversation id if the conversation context is destroyed and is not associated with a current Servlet request, or
-
the
ServletRequest
if the application is a web application deployed to a Servlet container, or -
any
java.lang.Object
for other types of application.
The conversation context provides access to state associated with a particular conversation. Every Servlet request has an associated conversation. This association is managed automatically by the container according to the following rules:
-
Any Servlet request has exactly one associated conversation.
-
The container provides a filter with the name "CDI Conversation Filter", which may be mapped in
web.xml
, allowing the user alter when the conversation is associated with the servlet request. If this filter is not mapped in anyweb.xml
in the application, the conversation associated with a Servlet request is determined at the beginning of the request before calling anyservice()
method of any servlet in the web application, calling thedoFilter()
method of any servlet filter in the web application and before the container calls anyServletRequestListener
orAsyncListener
in the web application. -
The implementation should determine the conversation associated with the Servlet request in a way that does not prevent other filters or servlet from setting the request character encoding or parsing the request body themselves.
Any conversation is in one of two states: transient or long-running.
-
By default, a conversation is transient
-
A transient conversation may be marked long-running by calling
Conversation.begin()
-
A long-running conversation may be marked transient by calling
Conversation.end()
All long-running conversations have a string-valued unique identifier, which may be set by the application when the conversation is marked long-running, or generated by the container.
If the conversation associated with the current Servlet request is in the transient state at the end of a Servlet request, it is destroyed, and the conversation context is also destroyed.
If the conversation associated with the current Servlet request is in the long-running state at the end of a Servlet request, it is not destroyed.
The long-running conversation associated with a request may be propagated to any Servlet request via use of a request parameter named cid
containing the unique identifier of the conversation.
In this case, the application must manage this request parameter.
If the current Servlet request is a JSF request, and the conversation is in long-running state, it is propagated according to the following rules:
-
The long-running conversation context associated with a request that renders a JSF view is automatically propagated to any faces request (JSF form submission) that originates from that rendered page.
-
The long-running conversation context associated with a request that results in a JSF redirect (a redirect resulting from a navigation rule or JSF
NavigationHandler
) is automatically propagated to the resulting non-faces request, and to any other subsequent request to the same URL. This is accomplished via use of a request parameter namedcid
containing the unique identifier of the conversation.
When no conversation is propagated to a Servlet request, or if a request parameter named conversationPropagation
has the value none
the request is associated with a new transient conversation.
All long-running conversations are scoped to a particular HTTP servlet session and may not cross session boundaries.
In the following cases, a propagated long-running conversation cannot be restored and reassociated with the request:
-
When the HTTP servlet session is invalidated, all long-running conversation contexts created during the current session are destroyed, after the servlet
service()
method completes. -
The container is permitted to arbitrarily destroy any long-running conversation that is associated with no current Servlet request, in order to conserve resources.
The conversation timeout, which may be specified by calling Conversation.setTimeout()
is a hint to the container that a conversation should not be destroyed if it has been active within the last given interval in milliseconds.
If the propagated conversation cannot be restored, the container must associate the request with a new transient conversation and throw an exception of type javax.enterprise.context.NonexistentConversationException
.
The container ensures that a long-running conversation may be associated with at most one request at a time, by blocking or rejecting concurrent requests.
If the container rejects a request, it must associate the request with a new transient conversation and throw an exception of type javax.enterprise.context.BusyConversationException
.
21. Lifecycle of contextual instances
21.1. Container invocations and interception in Java EE
When the application invokes:
-
a business method of a session bean via an EJB remote or local reference,
the invocation is treated as a business method invocation.
When running in Java EE, the container must extend the rules defined in Container invocations and interception, with:
-
Invocation of EJB timer service timeouts by the container are not business method invocations, but are intercepted by interceptors for EJB timeouts.
-
Only an invocation of business method on an EJB session bean is subject to EJB services such as declarative transaction management, concurrency, security and asynchronicity, as defined by the EJB specification.
-
Additionally, invocations of message listener methods of message-driven beans during message delivery are passed through method interceptors.
21.1.1. Lifecycle of EJB stateful session beans
When the create()
method of a Bean
object that represents an EJB stateful session bean that is called, the container creates and returns a container-specific internal local reference to a new EJB session bean instance. The reference must be passivation capable. This reference is not directly exposed to the application.
When the create()
method of a Bean
object that represents an EJB stateful session bean that is called, the container creates and returns a container-specific internal local reference to a new EJB session bean instance. The reference must be passivation capable. This reference is not directly exposed to the application.
Before injecting or returning a contextual instance to the application, the container transforms its internal reference into an object that implements the bean types expected by the application and delegates method invocations to the underlying EJB stateful session bean instance. This object must be passivation capable.
When the destroy()
method is called, and if the underlying EJB was not already removed by direct invocation of a remove method by the application, the container removes the EJB stateful session bean.
The @PreDestroy
callback must be invoked by the container.
Note that the container performs additional work when the underlying EJB is created and removed, as defined in Dependency injection
21.1.2. Lifecycle of EJB stateless and singleton session beans
When the create()
method of a Bean
object that represents an EJB stateless session or singleton session bean is called, the container creates and returns a container-specific internal local reference to the EJB session bean.
This reference is not directly exposed to the application.
Before injecting or returning a contextual instance to the application, the container transforms its internal reference into an object that implements the bean types expected by the application and delegates method invocations to the underlying EJB session bean. This object must be passivation capable.
When the destroy()
method is called, the container simply discards this internal reference.
Note that the container performs additional work when the underlying EJB is created and removed, as defined in Dependency injection
21.1.3. Lifecycle of resources
When the create()
method of a Bean
object that represents a resource is called, the container creates and returns a container-specific internal reference to the Java EE component environment resource, entity manager, entity manager factory, remote EJB instance or web service reference. This reference is not directly exposed to the application.
Before injecting or returning a contextual instance to the application, the container transforms its internal reference into an object that implements the bean types expected by the application and delegates method invocations to the underlying resource, entity manager, entity manager factory, remote EJB instance or web service reference. This object must be passivation capable.
The container must perform ordinary Java EE component environment injection upon any non-static field that functions as a resource declaration, as defined by the Java EE platform and Common Annotations for the Java platform specifications. The container is not required to perform Java EE component environment injection upon a static field. Portable applications should not rely upon the value of a static field that functions as a resource declaration.
References to EJBs and web services are always dependent scoped and a new instance must be obtained for every injection performed.
For an entity manager associated with a resource definition, it must behave as though it were injected directly using @PersistenceContext
.
When the destroy()
method of a bean which represents a remote stateful EJB reference is called, the container will not automatically destroy the EJB reference. The application must explicitly call the method annotated @Remove
. This behavior differs to that specified in Lifecycle of EJB stateful session beans for beans which represent a local stateful EJB reference
22. Decorators in Java EE
When running in Java EE, the container must extend the rules defined for managed beans in Decorators to EJB session beans.
22.1. Decorator beans in Java EE
Decorators of an EJB session bean must comply with the bean provider programming restrictions defined by the EJB specification. Decorators of an EJB stateful session bean must comply with the rules for instance passivation and conversational state defined by the EJB specification.
23. Interceptor bindings in Java EE
EJB session and message-driven beans support interception as defined in Interceptor bindings.
23.1. Interceptor enablement and ordering in Java EE
When running in Java EE, the container must extend the rules defined in Interceptor enablement and ordering and also ensured that:
-
Interceptors declared using interceptor bindings are called after interceptors declared using the
@Interceptor
annotation (or using the corresponding element of a deployment descriptor). -
Interceptors declared using interceptor bindings are called before any around-invoke, around-timeout, or lifecycle event callback methods declared on the target class or any superclass of the target class.
23.2. Interceptor resolution in Java EE
For a custom implementation of the Interceptor
interface defined in The Interceptor
interface, the container also calls intercepts()
to determine if the interceptor intercepts an EJB timeout method invocation.
24. Events in Java EE
24.1. Observer methods in EJB session beans
An observer method may also be a non-abstract method of an EJB session bean class. It must be either a business method exposed by a local business interface of the EJB or a static method of the bean class.
24.1.1. Declaring an observer method in an EJB
If a non-static method of a session bean class has a parameter annotated @Observes
or @ObservesAsync
, and the method is not a business method exposed by a local business interface of the EJB, the container automatically detects the problem and treats it as a definition error.
24.1.2. Observer method invocation context in Java EE
When Running in Java EE, the container must extend the rules defined in Observer method invocation context and must also ensure that all kinds of observers are called in the same client security context as the invocation of Event.fire()
or Event.fireAsync()
or BeanManager.fireEvent()
.
The transaction and security contexts for a business method exposed by a local business interface of an EJB session bean also depend upon the transaction attribute and @RunAs
descriptor, if any.
25. Portable extensions in Java EE
25.1. The Bean
interface in Java EE
When Running in Java EE, the container must extend the rules defined in The Bean
interface for managed bean to EJB session bean.
25.1.1. The Interceptor
interface in Java EE
When Running in Java EE, the container must extend the rules defined in The Interceptor
interface and must also ensure that
PRE_PASSIVATE
, POST_ACTIVATE
and AROUND_TIMEOUT
InterceptorType values are linked to EJB lifecycle callback or timeout method.
25.2. InjectionTarget
interface in Java EE
When running in Java EE, the container must extend the rules defined for InjectionTarget
in The Producer
and InjectionTarget
interfaces and must also ensure that:
-
when
inject()
is called, The container performs Java EE component environment injection, according to the semantics required by the Java EE platform specification, sets the value of all injected fields, and calls all initializer methods, as defined in Injection of fields and initializer methods in Java EE. -
@PostConstruct
callback is called according to the semantics required by the Java EE platform specification. -
@PreDestroy
callback is called according to the semantics required by the Java EE platform specification.
25.3. The BeanManager
object in Java EE
25.3.1. Obtaining a reference to the CDI container in Java EE
A Java EE container is required to provide a CDI provider that will allow access to the current container for any Java EE application or Java EE module which contains enabled beans.
Java EE Components may obtain an instance of BeanManager
from JNDI by looking up the name java:comp/BeanManager
.
25.3.2. Wrapping a Unified EL ExpressionFactory
The method BeanManager.wrapExpressionFactory()
returns a wrapper javax.el.ExpressionFactory
that delegates MethodExpression
and ValueExpression
creation to the given ExpressionFactory
. When a Unified EL expression is evaluated using a MethodExpression
or ValueExpression
returned by the wrapper ExpressionFactory
, the rules defined in Dependent pseudo-scope and Unified EL are enforced by the container.
public ExpressionFactory wrapExpressionFactory(ExpressionFactory expressionFactory);
25.4. Alternative metadata sources and EJB
When running in Java EE, the container must extend the rules defined in Alternative metadata sources and ensure that:
-
when an
AnnotatedType
represents an EJB session bean class,Annotated.getTypeClosure()
must returns the EJB session bean types as defined in Bean types of a session bean.
25.5. Addition to Container lifecycle events in Java EE
25.5.1. ProcessAnnotatedType
event in Java EE
When running in Java EE, the container must extend the rules defined in ProcessAnnotatedType
event to Java EE component and EJB session bean classes.
25.5.2. ProcessInjectionPoint
event and EJB
When running in Java EE, the container must also fire an event for every injection point of every Java EE component class supporting injection that may be instantiated by the container at runtime, including every managed bean declared using @ManagedBean
, EJB session or message-driven bean.
25.5.3. ProcessInjectionTarget
event and EJB
When running in Java EE, the container must also fire an event for every Java EE component class supporting injection that may be instantiated by the container at runtime, including every managed bean declared using @ManagedBean
, EJB session or message-driven bean.
The container must extend the rules defined in ProcessInjectionTarget
event for managed bean to EJB session bean and other Java EE component class supporting injection.
For example, this observer decorates the InjectionTarget
for all servlets.
<T extends Servlet> void decorateServlet(@Observes ProcessInjectionTarget<T> pit) {
pit.setInjectionTarget( decorate( pit.getInjectionTarget() ) );
}
25.5.4. ProcessBeanAttributes
event and EJB
When running in Java EE, the container must extend the rules defined in ProcessBeanAttributes
event to EJB session bean.
25.5.5. ProcessBean
event and EJB
In addition to definition given in ProcessBean
event the following apply:
-
For a session bean with bean class
X
, the container must raise an event of typeProcessSessionBean<X>
.
Resources are considered to be producer fields.
When running in Java EE, the interface javax.enterprise.inject.spi.ProcessBean
is also a supertype of javax.enterprise.inject.spi.ProcessSession
:
public interface ProcessSessionBean<X>
extends ProcessManagedBean<Object> {
public String getEjbName();
public SessionBeanType getSessionBeanType();
}
-
getEjbName()
returns the EJB name of the session bean. -
getSessionBeanType()
returns ajavax.enterprise.inject.spi.SessionBeanType
representing the kind of session bean.
public enum SessionBeanType { STATELESS, STATEFUL, SINGLETON }
26. Packaging and deployment in Java EE
26.1. Bean archive with EJB Session Beans
When running in Java EE, the container must extend the rules defined in Bean archives with:
-
An implicit bean archive may also contain EJB session beans, and
-
EJB session bean should be considered as bean class with bean defining annotation when determining if and archive is an implicit bean archive.
When determining which archives are bean archives, the container must also consider:
-
EJB jars or application client jars
-
The
WEB-INF/classes
directory of a war
The container is not required to support application client jar bean archives.
A Java EE container is required by the Java EE specification to support Java EE modules.
In a war, the beans.xml
file must be named:
-
WEB-INF/beans.xml
orWEB-INF/classes/META-INF/beans.xml
.
If a war has a file named beans.xml
in both the WEB-INF
directory and in the WEB-INF/classes/META-INF
directory, then non-portable behavior results.
Portable applications must have a beans.xml
file in only one of the WEB-INF
or the WEB-INF/classes/META-INF
directories.
The following additional rules apply regarding container search for beans:
-
In an application deployed as an ear, the container searches every bean archive bundled with or referenced by the ear, including bean archives bundled with or referenced by wars, EJB jars and rars contained in the ear. The bean archives might be library jars, EJB jars or war
WEB-INF/classes
directories. -
In an application deployed as a war, the container searches every bean archive bundled with or referenced by the war. The bean archives might be library jars or the
WEB-INF/classes
directory. -
In an application deployed as an EJB jar, the container searches the EJB jar, if it is a bean archive, and every bean archive referenced by the EJB jar.
-
In an application deployed as a rar, the container searches every bean archive bundled with or referenced by the rar.
-
An embeddable EJB container searches each bean archive in the JVM classpath that is listed in the value of the embeddable container initialization property
javax.ejb.embeddable.modules
, or every bean archive in the JVM classpath if the property is not specified. The bean archives might be directories, library jars or EJB jars.
26.2. Type and Bean discovery for EJB
In Java EE, the container automatically discovers EJB session beans and other Java EE component class supporting injection, in bean archives like it does for managed bean as defined in Type and Bean discovery.
26.2.1. Bean discovery in Java EE
When running in Java EE, the container must extend the rules defined in Bean discovery and must also discover each EJB session beans.
26.2.2. Trimmed bean archive in Java EE
When running in Java EE, the container must extend the rules defined in Trimmed bean archive and must ensure that EJB session beans are not removed from the set of discovered types.
26.3. Integration with Unified EL
The container must provide a Unified EL ELResolver
to the servlet engine and JSF implementation that resolves bean names using the rules of name resolution defined in Name resolution and resolving ambiguities according to Ambiguous names.
-
If a name used in an EL expression does not resolve to any bean, the
ELResolver
must return a null value. -
Otherwise, if a name used in an EL expression resolves to exactly one bean, the
ELResolver
must return a contextual instance of the bean, as defined in Contextual instance of a bean.