Interface XmlPullParser

All Known Implementing Classes:
MXParser

public interface XmlPullParser
XML Pull Parser is an interface that defines parsing functionlity provided in XMLPULL V1 API (visit this website to learn more about API and its implementations).

There are following different kinds of parser depending on which features are set:

  • non-validating parser as defined in XML 1.0 spec when FEATURE_PROCESS_DOCDECL is set to true
  • validating parser as defined in XML 1.0 spec when FEATURE_VALIDATION is true (and that implies that FEATURE_PROCESS_DOCDECL is true)
  • when FEATURE_PROCESS_DOCDECL is false (this is default and if different value is required necessary must be changed before parsing is started) then parser behaves like XML 1.0 compliant non-validating parser under condition that no DOCDECL is present in XML documents (internal entites can still be defined with defineEntityReplacementText()). This mode of operation is intened for operation in constrained environments such as J2ME.

There are two key methods: next() and nextToken(). While next() provides access to high level parsing events, nextToken() allows access to lower level tokens.

The current event state of the parser can be determined by calling the getEventType() method. Initially, the parser is in the START_DOCUMENT state.

The method next() advances the parser to the next event. The int value returned from next determines the current parser state and is identical to the value returned from following calls to getEventType ().

Th following event types are seen by next()

START_TAG
An XML start tag was read.
TEXT
Text content was read; the text content can be retreived using the getText() method. (when in validating mode next() will not report ignorable whitespaces, use nextToken() instead)
END_TAG
An end tag was read
END_DOCUMENT
No more events are available

after first next() or nextToken() (or any other next*() method) is called user application can obtain XML version, standalone and encoding from XML declaration in following ways:

  • version: getProperty("http://xmlpull.org/v1/doc/properties.html#xmldecl-version") returns String ("1.0") or null if XMLDecl was not read or if property is not supported
  • standalone: getProperty("http://xmlpull.org/v1/doc/features.html#xmldecl-standalone") returns Boolean: null if there was no standalone declaration or if property is not supported otherwise returns Boolean(true) if standalon="yes" and Boolean(false) when standalone="no"
  • encoding: obtained from getInputEncoding() null if stream had unknown encoding (not set in setInputStream) and it was not declared in XMLDecl

A minimal example for using this API may look as follows:

 import java.io.IOException;
 import java.io.StringReader;

 import org.xmlpull.v1.XmlPullParser;
 import org.xmlpull.v1.XmlPullParserException.html;
 import org.xmlpull.v1.XmlPullParserFactory;

 public class SimpleXmlPullApp
 {

     public static void main (String args[])
         throws XmlPullParserException, IOException
     {
         XmlPullParserFactory factory = XmlPullParserFactory.newInstance();
         factory.setNamespaceAware(true);
         XmlPullParser xpp = factory.newPullParser();

         xpp.setInput( new StringReader ( "<foo>Hello World!</foo>" ) );
         int eventType = xpp.getEventType();
         while (eventType != XmlPullParser.END_DOCUMENT) {
          if(eventType == XmlPullParser.START_DOCUMENT) {
              System.out.println("Start document");
          } else if(eventType == XmlPullParser.END_DOCUMENT) {
              System.out.println("End document");
          } else if(eventType == XmlPullParser.START_TAG) {
              System.out.println("Start tag "+xpp.getName());
          } else if(eventType == XmlPullParser.END_TAG) {
              System.out.println("End tag "+xpp.getName());
          } else if(eventType == XmlPullParser.TEXT) {
              System.out.println("Text "+xpp.getText());
          }
          eventType = xpp.next();
         }
     }
 }
 

The above example will generate the following output:

 Start document
 Start tag foo
 Text Hello World!
 End tag foo
 

For more details on API usage, please refer to the quick Introduction available at http://www.xmlpull.org

Author:
Stefan Haustein, Aleksander Slominski
See Also:
  • Field Summary

    Fields
    Modifier and Type
    Field
    Description
    static final int
    A CDATA sections was just read; this token is available only from calls to nextToken().
    static final int
    An XML comment was just read.
    static final int
    An XML document type declaration was just read.
    static final int
    Logical end of the xml document.
    static final int
    Returned from getEventType(), next(), or nextToken() when an end tag was read.
    static final int
    An entity reference was just read; this token is available from nextToken() only.
    static final String
    This feature determines whether the document declaration is processed.
    static final String
    This feature determines whether the parser processes namespaces.
    static final String
    This feature determines whether namespace attributes are exposed via the attribute access methods.
    static final String
    If this feature is activated, all validation errors as defined in the XML 1.0 sepcification are reported.
    static final int
    Ignorable whitespace was just read.
    static final String
    This constant represents the default namespace (empty string "")
    static final int
    An XML processing instruction declaration was just read.
    static final int
    Signalize that parser is at the very beginning of the document and nothing was read yet.
    static final int
    Returned from getEventType(), next(), nextToken() when a start tag was read.
    static final int
    Character data was read and will is available by calling getText().
    static final String[]
    This array can be used to convert the event type integer constants such as START_TAG or TEXT to to a string.
  • Method Summary

    Modifier and Type
    Method
    Description
    void
    defineEntityReplacementText(String entityName, String replacementText)
    Set new value for entity replacement text as defined in XML 1.0 Section 4.5 Construction of Internal Entity Replacement Text.
    int
    Returns the number of attributes of the current start tag, or -1 if the current event type is not START_TAG
    getAttributeName(int index)
    Returns the local name of the specified attribute if namespaces are enabled or just attribute name if namespaces are disabled.
    Returns the namespace URI of the attribute with the given index (starts from 0).
    getAttributePrefix(int index)
    Returns the prefix of the specified attribute Returns null if the element has no prefix.
    getAttributeType(int index)
    Returns the type of the specified attribute If parser is non-validating it MUST return CDATA.
    getAttributeValue(int index)
    Returns the given attributes value.
    getAttributeValue(String namespace, String name)
    Returns the attributes value identified by namespace URI and namespace localName.
    int
    Returns the current column number, starting from 0.
    int
    Returns the current depth of the element.
    int
    Returns the type of the current event (START_TAG, END_TAG, TEXT, etc.)
    boolean
    Returns the current value of the given feature.
    Returns the input encoding if known, null otherwise.
    int
    Returns the current line number, starting from 1.
    For START_TAG or END_TAG events, the (local) name of the current element is returned when namespaces are enabled.
    Returns the namespace URI of the current element.
    Returns the URI corresponding to the given prefix, depending on current state of the parser.
    int
    getNamespaceCount(int depth)
    Returns the numbers of elements in the namespace stack for the given depth.
    Returns the namespace prefixe for the given position in the namespace stack.
    getNamespaceUri(int pos)
    Returns the namespace URI for the given position in the namespace stack If the position is out of range, an exception is thrown.
    Returns a short text describing the current parser state, including the position, a description of the current event and the data source if known.
    Returns the prefix of the current element.
    Look up the value of a property.
    Returns the text content of the current event as String.
    char[]
    getTextCharacters(int[] holderForStartAndLength)
    Returns the buffer that contains the text of the current event, as well as the start offset and length relevant for the current event.
    boolean
    isAttributeDefault(int index)
    Returns if the specified attribute was not in input was declared in XML.
    boolean
    Returns true if the current event is START_TAG and the tag is degenerated (e.g.
    boolean
    Checks whether the current TEXT event contains only whitespace characters.
    int
    Get next parsing event - element content wil be coalesced and only one TEXT event must be returned for whole element content (comments and processing instructions will be ignored and emtity references must be expanded or exception mus be thrown if entity reerence can not be exapnded).
    int
    Call next() and return event if it is START_TAG or END_TAG otherwise throw an exception.
    If current event is START_TAG then if next element is TEXT then element content is returned or if next event is END_TAG then empty string is returned, otherwise exception is thrown.
    int
    This method works similarly to next() but will expose additional event types (COMMENT, CDSECT, DOCDECL, ENTITY_REF, PROCESSING_INSTRUCTION, or IGNORABLE_WHITESPACE) if they are available in input.
    void
    require(int type, String namespace, String name)
    Test if the current event is of the given type and if the namespace and name do match.
    void
    setFeature(String name, boolean state)
    Use this call to change the general behaviour of the parser, such as namespace processing or doctype declaration handling.
    void
    setInput(InputStream inputStream, String inputEncoding)
    Sets the input stream the parser is going to process.
    void
    Set the input source for parser to the given reader and resets the parser.
    void
    setProperty(String name, Object value)
    Set the value of a property.
  • Field Details

    • NO_NAMESPACE

      static final String NO_NAMESPACE
      This constant represents the default namespace (empty string "")
      See Also:
    • START_DOCUMENT

      static final int START_DOCUMENT
      Signalize that parser is at the very beginning of the document and nothing was read yet. This event type can only be observed by calling getEvent() before the first call to next(), nextToken, or nextTag()).
      See Also:
    • END_DOCUMENT

      static final int END_DOCUMENT
      Logical end of the xml document. Returned from getEventType, next() and nextToken() when the end of the input document has been reached.

      NOTE: calling again next() or nextToken() will result in exception being thrown.

      See Also:
    • START_TAG

      static final int START_TAG
      Returned from getEventType(), next(), nextToken() when a start tag was read. The name of start tag is available from getName(), its namespace and prefix are available from getNamespace() and getPrefix() if namespaces are enabled. See getAttribute* methods to retrieve element attributes. See getNamespace* methods to retrieve newly declared namespaces.
      See Also:
    • END_TAG

      static final int END_TAG
      Returned from getEventType(), next(), or nextToken() when an end tag was read. The name of start tag is available from getName(), its namespace and prefix are available from getNamespace() and getPrefix().
      See Also:
    • TEXT

      static final int TEXT
      Character data was read and will is available by calling getText().

      Please note: next() will accumulate multiple events into one TEXT event, skipping IGNORABLE_WHITESPACE, PROCESSING_INSTRUCTION and COMMENT events, In contrast, nextToken() will stop reading text when any other event is observed. Also, when the state was reached by calling next(), the text value will be normalized, whereas getText() will return unnormalized content in the case of nextToken(). This allows an exact roundtrip without chnanging line ends when examining low level events, whereas for high level applications the text is normalized apropriately.

      See Also:
    • CDSECT

      static final int CDSECT
      A CDATA sections was just read; this token is available only from calls to nextToken(). A call to next() will accumulate various text events into a single event of type TEXT. The text contained in the CDATA section is available by callling getText().
      See Also:
    • ENTITY_REF

      static final int ENTITY_REF
      An entity reference was just read; this token is available from nextToken() only. The entity name is available by calling getName(). If available, the replacement text can be obtained by calling getTextt(); otherwise, the user is responsibile for resolving the entity reference. This event type is never returned from next(); next() will accumulate the replacement text and other text events to a single TEXT event.
      See Also:
    • IGNORABLE_WHITESPACE

      static final int IGNORABLE_WHITESPACE
      Ignorable whitespace was just read. This token is available only from nextToken()). For non-validating parsers, this event is only reported by nextToken() when outside the root element. Validating parsers may be able to detect ignorable whitespace at other locations. The ignorable whitespace string is available by calling getText()

      NOTE: this is different from calling the isWhitespace() method, since text content may be whitespace but not ignorable.

      Ignorable whitespace is skipped by next() automatically; this event type is never returned from next().

      See Also:
    • PROCESSING_INSTRUCTION

      static final int PROCESSING_INSTRUCTION
      An XML processing instruction declaration was just read. This event type is available only via nextToken(). getText() will return text that is inside the processing instruction. Calls to next() will skip processing instructions automatically.
      See Also:
    • COMMENT

      static final int COMMENT
      An XML comment was just read. This event type is this token is available via nextToken() only; calls to next() will skip comments automatically. The content of the comment can be accessed using the getText() method.
      See Also:
    • DOCDECL

      static final int DOCDECL
      An XML document type declaration was just read. This token is available from nextToken() only. The unparsed text inside the doctype is available via the getText() method.
      See Also:
    • TYPES

      static final String[] TYPES
      This array can be used to convert the event type integer constants such as START_TAG or TEXT to to a string. For example, the value of TYPES[START_TAG] is the string "START_TAG".

      This array is intended for diagnostic output only. Relying on the contents of the array may be dangerous since malicous applications may alter the array, although it is final, due to limitations of the Java language.

    • FEATURE_PROCESS_NAMESPACES

      static final String FEATURE_PROCESS_NAMESPACES
      This feature determines whether the parser processes namespaces. As for all features, the default value is false.

      NOTE: The value can not be changed during parsing an must be set before parsing.

      See Also:
    • FEATURE_REPORT_NAMESPACE_ATTRIBUTES

      static final String FEATURE_REPORT_NAMESPACE_ATTRIBUTES
      This feature determines whether namespace attributes are exposed via the attribute access methods. Like all features, the default value is false. This feature cannot be changed during parsing.
      See Also:
    • FEATURE_PROCESS_DOCDECL

      static final String FEATURE_PROCESS_DOCDECL
      This feature determines whether the document declaration is processed. If set to false, the DOCDECL event type is reported by nextToken() and ignored by next().

      If this featue is activated, then the document declaration must be processed by the parser.

      Please note: If the document type declaration was ignored, entity references may cause exceptions later in the parsing process. The default value of this feature is false. It cannot be changed during parsing.

      See Also:
    • FEATURE_VALIDATION

      static final String FEATURE_VALIDATION
      If this feature is activated, all validation errors as defined in the XML 1.0 sepcification are reported. This implies that FEATURE_PROCESS_DOCDECL is true and both, the internal and external document type declaration will be processed.

      Please Note: This feature can not be changed during parsing. The default value is false.

      See Also:
  • Method Details

    • setFeature

      void setFeature(String name, boolean state) throws XmlPullParserException
      Use this call to change the general behaviour of the parser, such as namespace processing or doctype declaration handling. This method must be called before the first call to next or nextToken. Otherwise, an exception is thrown.

      Example: call setFeature(FEATURE_PROCESS_NAMESPACES, true) in order to switch on namespace processing. The initial settings correspond to the properties requested from the XML Pull Parser factory. If none were requested, all feautures are deactivated by default.

      Throws:
      XmlPullParserException - If the feature is not supported or can not be set
      IllegalArgumentException - If string with the feature name is null
    • getFeature

      boolean getFeature(String name)
      Returns the current value of the given feature.

      Please note: unknown features are always returned as false.

      Parameters:
      name - The name of feature to be retrieved.
      Returns:
      The value of the feature.
      Throws:
      IllegalArgumentException - if string the feature name is null
    • setProperty

      void setProperty(String name, Object value) throws XmlPullParserException
      Set the value of a property.

      The property name is any fully-qualified URI.

      Throws:
      XmlPullParserException - If the property is not supported or can not be set
      IllegalArgumentException - If string with the property name is null
    • getProperty

      Object getProperty(String name)
      Look up the value of a property.

      The property name is any fully-qualified URI.

      NOTE: unknown properties are always returned as null.

      Parameters:
      name - The name of property to be retrieved.
      Returns:
      The value of named property.
    • setInput

      void setInput(Reader in)
      Set the input source for parser to the given reader and resets the parser. The event type is set to the initial value START_DOCUMENT. Setting the reader to null will just stop parsing and reset parser state, allowing the parser to free internal resources such as parsing buffers.
    • setInput

      void setInput(InputStream inputStream, String inputEncoding)
      Sets the input stream the parser is going to process. This call resets the parser state and sets the event type to the initial value START_DOCUMENT.

      NOTE: If an input encoding string is passed, it MUST be used. Otherwise, if inputEncoding is null, the parser SHOULD try to determine input encoding following XML 1.0 specification (see below). If encoding detection is supported then following feature http://xmlpull.org/v1/doc/features.html#detect-encoding MUST be true amd otherwise it must be false

      Parameters:
      inputStream - contains a raw byte input stream of possibly unknown encoding (when inputEncoding is null).
      inputEncoding - if not null it MUST be used as encoding for inputStream
    • getInputEncoding

      String getInputEncoding()
      Returns the input encoding if known, null otherwise. If setInput(InputStream, inputEncoding) was called with an inputEncoding value other than null, this value must be returned from this method. Otherwise, if inputEncoding is null and the parser suppports the encoding detection feature (http://xmlpull.org/v1/doc/features.html#detect-encoding), it must return the detected encoding. If setInput(Reader) was called, null is returned. After first call to next if XML declaration was present this method will return encoding declared.
    • defineEntityReplacementText

      void defineEntityReplacementText(String entityName, String replacementText) throws XmlPullParserException
      Set new value for entity replacement text as defined in XML 1.0 Section 4.5 Construction of Internal Entity Replacement Text. If FEATURE_PROCESS_DOCDECL or FEATURE_VALIDATION are set, calling this function will result in an exception -- when processing of DOCDECL is enabled, there is no need to the entity replacement text manually.

      The motivation for this function is to allow very small implementations of XMLPULL that will work in J2ME environments. Though these implementations may not be able to process the document type declaration, they still can work with known DTDs by using this function.

      Please notes: The given value is used literally as replacement text and it corresponds to declaring entity in DTD that has all special characters escaped: left angle bracket is replaced with &lt;, ampersnad with &amp; and so on.

      Note: The given value is the literal replacement text and must not contain any other entity reference (if it contains any entity reference there will be no further replacement).

      Note: The list of pre-defined entity names will always contain standard XML entities such as amp (&amp;), lt (&lt;), gt (&gt;), quot (&quot;), and apos (&apos;). Those cannot be redefined by this method!

      Throws:
      XmlPullParserException
      See Also:
    • getNamespaceCount

      int getNamespaceCount(int depth) throws XmlPullParserException
      Returns the numbers of elements in the namespace stack for the given depth. If namespaces are not enabled, 0 is returned.

      NOTE: when parser is on END_TAG then it is allowed to call this function with getDepth()+1 argument to retrieve position of namespace prefixes and URIs that were declared on corresponding START_TAG.

      NOTE: to retrieve lsit of namespaces declared in current element:

             XmlPullParser pp = ...
             int nsStart = pp.getNamespaceCount(pp.getDepth()-1);
             int nsEnd = pp.getNamespaceCount(pp.getDepth());
             for (int i = nsStart; i invalid input: '<' nsEnd; i++) {
                String prefix = pp.getNamespacePrefix(i);
                String ns = pp.getNamespaceUri(i);
                 // ...
            }
       
      Throws:
      XmlPullParserException
      See Also:
    • getNamespacePrefix

      String getNamespacePrefix(int pos) throws XmlPullParserException
      Returns the namespace prefixe for the given position in the namespace stack. Default namespace declaration (xmlns='...') will have null as prefix. If the given index is out of range, an exception is thrown.

      Please note: when the parser is on an END_TAG, namespace prefixes that were declared in the corresponding START_TAG are still accessible although they are no longer in scope.

      Throws:
      XmlPullParserException
    • getNamespaceUri

      String getNamespaceUri(int pos) throws XmlPullParserException
      Returns the namespace URI for the given position in the namespace stack If the position is out of range, an exception is thrown.

      NOTE: when parser is on END_TAG then namespace prefixes that were declared in corresponding START_TAG are still accessible even though they are not in scope

      Throws:
      XmlPullParserException
    • getNamespace

      String getNamespace(String prefix)
      Returns the URI corresponding to the given prefix, depending on current state of the parser.

      If the prefix was not declared in the current scope, null is returned. The default namespace is included in the namespace table and is available via getNamespace (null).

      This method is a convenience method for

        for (int i = getNamespaceCount(getDepth ())-1; i >= 0; i--) {
         if (getNamespacePrefix(i).equals( prefix )) {
           return getNamespaceUri(i);
         }
        }
        return null;
       

      Please note: parser implementations may provide more efifcient lookup, e.g. using a Hashtable. The 'xml' prefix is bound to "http://www.w3.org/XML/1998/namespace", as defined in the Namespaces in XML specification. Analogous, the 'xmlns' prefix is resolved to http://www.w3.org/2000/xmlns/

      See Also:
    • getDepth

      int getDepth()
      Returns the current depth of the element. Outside the root element, the depth is 0. The depth is incremented by 1 when a start tag is reached. The depth is decremented AFTER the end tag event was observed.
       <!-- outside -->     0
       <root>                  1
         sometext                 1
           <foobar>         2
           </foobar>        2
       </root>              1
       <!-- outside -->     0
       
    • getPositionDescription

      String getPositionDescription()
      Returns a short text describing the current parser state, including the position, a description of the current event and the data source if known. This method is especially useful to provide meaningful error messages and for debugging purposes.
    • getLineNumber

      int getLineNumber()
      Returns the current line number, starting from 1. When the parser does not know the current line number or can not determine it, -1 is returned (e.g. for WBXML).
      Returns:
      current line number or -1 if unknown.
    • getColumnNumber

      int getColumnNumber()
      Returns the current column number, starting from 0. When the parser does not know the current column number or can not determine it, -1 is returned (e.g. for WBXML).
      Returns:
      current column number or -1 if unknown.
    • isWhitespace

      boolean isWhitespace() throws XmlPullParserException
      Checks whether the current TEXT event contains only whitespace characters. For IGNORABLE_WHITESPACE, this is always true. For TEXT and CDSECT, false is returned when the current event text contains at least one non-white space character. For any other event type an exception is thrown.

      Please note: non-validating parsers are not able to distinguish whitespace and ignorable whitespace, except from whitespace outside the root element. Ignorable whitespace is reported as separate event, which is exposed via nextToken only.

      Throws:
      XmlPullParserException
    • getText

      String getText()
      Returns the text content of the current event as String. The value returned depends on current event type, for example for TEXT event it is element content (this is typical case when next() is used).

      See description of nextToken() for detailed description of possible returned values for different types of events.

      NOTE: in case of ENTITY_REF, this method returns the entity replacement text (or null if not available). This is the only case where getText() and getTextCharacters() return different values.

      See Also:
    • getTextCharacters

      char[] getTextCharacters(int[] holderForStartAndLength)
      Returns the buffer that contains the text of the current event, as well as the start offset and length relevant for the current event. See getText(), next() and nextToken() for description of possible returned values.

      Please note: this buffer must not be modified and its content MAY change after a call to next() or nextToken(). This method will always return the same value as getText(), except for ENTITY_REF. In the case of ENTITY ref, getText() returns the replacement text and this method returns the actual input buffer containing the entity name. If getText() returns null, this method returns null as well and the values returned in the holder array MUST be -1 (both start and length).

      Parameters:
      holderForStartAndLength - Must hold an 2-element int array into which the start offset and length values will be written.
      Returns:
      char buffer that contains the text of the current event (null if the current event has no text associated).
      See Also:
    • getNamespace

      String getNamespace()
      Returns the namespace URI of the current element. The default namespace is represented as empty string. If namespaces are not enabled, an empty String ("") is always returned. The current event must be START_TAG or END_TAG; otherwise, null is returned.
    • getName

      String getName()
      For START_TAG or END_TAG events, the (local) name of the current element is returned when namespaces are enabled. When namespace processing is disabled, the raw name is returned. For ENTITY_REF events, the entity name is returned. If the current event is not START_TAG, END_TAG, or ENTITY_REF, null is returned.

      Please note: To reconstruct the raw element name when namespaces are enabled and the prefix is not null, you will need to add the prefix and a colon to localName..

    • getPrefix

      String getPrefix()
      Returns the prefix of the current element. If the element is in the default namespace (has no prefix), null is returned. If namespaces are not enabled, or the current event is not START_TAG or END_TAG, null is returned.
    • isEmptyElementTag

      boolean isEmptyElementTag() throws XmlPullParserException
      Returns true if the current event is START_TAG and the tag is degenerated (e.g. <foobar/>).

      NOTE: if the parser is not on START_TAG, an exception will be thrown.

      Throws:
      XmlPullParserException
    • getAttributeCount

      int getAttributeCount()
      Returns the number of attributes of the current start tag, or -1 if the current event type is not START_TAG
      See Also:
    • getAttributeNamespace

      String getAttributeNamespace(int index)
      Returns the namespace URI of the attribute with the given index (starts from 0). Returns an empty string ("") if namespaces are not enabled or the attribute has no namespace. Throws an IndexOutOfBoundsException if the index is out of range or the current event type is not START_TAG.

      NOTE: if FEATURE_REPORT_NAMESPACE_ATTRIBUTES is set then namespace attributes (xmlns:ns='...') must be reported with namespace http://www.w3.org/2000/xmlns/ (visit this URL for description!). The default namespace attribute (xmlns="...") will be reported with empty namespace.

      NOTE:The xml prefix is bound as defined in Namespaces in XML specification to "http://www.w3.org/XML/1998/namespace".

      Parameters:
      index - zero-based index of attribute
      Returns:
      attribute namespace, empty string ("") is returned if namesapces processing is not enabled or namespaces processing is enabled but attribute has no namespace (it has no prefix).
    • getAttributeName

      String getAttributeName(int index)
      Returns the local name of the specified attribute if namespaces are enabled or just attribute name if namespaces are disabled. Throws an IndexOutOfBoundsException if the index is out of range or current event type is not START_TAG.
      Parameters:
      index - zero-based index of attribute
      Returns:
      attribute name (null is never returned)
    • getAttributePrefix

      String getAttributePrefix(int index)
      Returns the prefix of the specified attribute Returns null if the element has no prefix. If namespaces are disabled it will always return null. Throws an IndexOutOfBoundsException if the index is out of range or current event type is not START_TAG.
      Parameters:
      index - zero-based index of attribute
      Returns:
      attribute prefix or null if namespaces processing is not enabled.
    • getAttributeType

      String getAttributeType(int index)
      Returns the type of the specified attribute If parser is non-validating it MUST return CDATA.
      Parameters:
      index - zero-based index of attribute
      Returns:
      attribute type (null is never returned)
    • isAttributeDefault

      boolean isAttributeDefault(int index)
      Returns if the specified attribute was not in input was declared in XML. If parser is non-validating it MUST always return false. This information is part of XML infoset:
      Parameters:
      index - zero-based index of attribute
      Returns:
      false if attribute was in input
    • getAttributeValue

      String getAttributeValue(int index)
      Returns the given attributes value. Throws an IndexOutOfBoundsException if the index is out of range or current event type is not START_TAG.

      NOTE: attribute value must be normalized (including entity replacement text if PROCESS_DOCDECL is false) as described in XML 1.0 section 3.3.3 Attribute-Value Normalization

      Parameters:
      index - zero-based index of attribute
      Returns:
      value of attribute (null is never returned)
      See Also:
    • getAttributeValue

      String getAttributeValue(String namespace, String name)
      Returns the attributes value identified by namespace URI and namespace localName. If namespaces are disabled namespace must be null. If current event type is not START_TAG then IndexOutOfBoundsException will be thrown.

      NOTE: attribute value must be normalized (including entity replacement text if PROCESS_DOCDECL is false) as described in XML 1.0 section 3.3.3 Attribute-Value Normalization

      Parameters:
      namespace - Namespace of the attribute if namespaces are enabled otherwise must be null
      name - If namespaces enabled local name of attribute otherwise just attribute name
      Returns:
      value of attribute or null if attribute with given name does not exist
      See Also:
    • getEventType

      int getEventType() throws XmlPullParserException
      Returns the type of the current event (START_TAG, END_TAG, TEXT, etc.)
      Throws:
      XmlPullParserException
      See Also:
    • next

      Get next parsing event - element content wil be coalesced and only one TEXT event must be returned for whole element content (comments and processing instructions will be ignored and emtity references must be expanded or exception mus be thrown if entity reerence can not be exapnded). If element content is empty (content is "") then no TEXT event will be reported.

      NOTE: empty element (such as <tag/>) will be reported with two separate events: START_TAG, END_TAG - it must be so to preserve parsing equivalency of empty element to <tag></tag>. (see isEmptyElementTag ())

      Throws:
      XmlPullParserException
      IOException
      See Also:
    • nextToken

      int nextToken() throws XmlPullParserException, IOException
      This method works similarly to next() but will expose additional event types (COMMENT, CDSECT, DOCDECL, ENTITY_REF, PROCESSING_INSTRUCTION, or IGNORABLE_WHITESPACE) if they are available in input.

      If special feature FEATURE_XML_ROUNDTRIP (identified by URI: http://xmlpull.org/v1/doc/features.html#xml-roundtrip) is enabled it is possible to do XML document round trip ie. reproduce exectly on output the XML input using getText(): returned content is always unnormalized (exactly as in input). Otherwise returned content is end-of-line normalized as described XML 1.0 End-of-Line Handling and. Also when this feature is enabled exact content of START_TAG, END_TAG, DOCDECL and PROCESSING_INSTRUCTION is available.

      Here is the list of tokens that can be returned from nextToken() and what getText() and getTextCharacters() returns:

      START_DOCUMENT
      null
      END_DOCUMENT
      null
      START_TAG
      null unless FEATURE_XML_ROUNDTRIP enabled and then returns XML tag, ex: <tag attr='val'>
      END_TAG
      null unless FEATURE_XML_ROUNDTRIP id enabled and then returns XML tag, ex: </tag>
      TEXT
      return element content.
      Note: that element content may be delivered in multiple consecutive TEXT events.
      IGNORABLE_WHITESPACE
      return characters that are determined to be ignorable white space. If the FEATURE_XML_ROUNDTRIP is enabled all whitespace content outside root element will always reported as IGNORABLE_WHITESPACE otherise rteporting is optional.
      Note: that element content may be delevered in multiple consecutive IGNORABLE_WHITESPACE events.
      CDSECT
      return text inside CDATA (ex. 'fo<o' from <!CDATA[fo<o]]>)
      PROCESSING_INSTRUCTION
      if FEATURE_XML_ROUNDTRIP is true return exact PI content ex: 'pi foo' from <?pi foo?> otherwise it may be exact PI content or concatenation of PI target, space and data so for example for <?target data?> string "target data" may be returned if FEATURE_XML_ROUNDTRIP is false.
      COMMENT
      return comment content ex. 'foo bar' from <!--foo bar-->
      ENTITY_REF
      getText() MUST return entity replacement text if PROCESS_DOCDECL is false otherwise getText() MAY return null, additionally getTextCharacters() MUST return entity name (for example 'entity_name' for &entity_name;).
      NOTE: this is the only place where value returned from getText() and getTextCharacters() are different
      NOTE: it is user responsibility to resolve entity reference if PROCESS_DOCDECL is false and there is no entity replacement text set in defineEntityReplacementText() method (getText() will be null)
      NOTE: character entities (ex. &#32;) and standard entities such as &amp; &lt; &gt; &quot; &apos; are reported as well and are not reported as TEXT tokens but as ENTITY_REF tokens! This requirement is added to allow to do roundtrip of XML documents!
      DOCDECL
      if FEATURE_XML_ROUNDTRIP is true or PROCESS_DOCDECL is false then return what is inside of DOCDECL for example it returns:
       " titlepage SYSTEM "http://www.foo.bar/dtds/typo.dtd"
       [<!ENTITY % active.links "INCLUDE">]"

      for input document that contained:

       <!DOCTYPE titlepage SYSTEM "http://www.foo.bar/dtds/typo.dtd"
       [<!ENTITY % active.links "INCLUDE">]>
      otherwise if FEATURE_XML_ROUNDTRIP is false and PROCESS_DOCDECL is true then what is returned is undefined (it may be even null)

      NOTE: there is no gurantee that there will only one TEXT or IGNORABLE_WHITESPACE event from nextToken() as parser may chose to deliver element content in multiple tokens (dividing element content into chunks)

      NOTE: whether returned text of token is end-of-line normalized is depending on FEATURE_XML_ROUNDTRIP.

      NOTE: XMLDecl (<?xml ...?>) is not reported but its content is available through optional properties (see class description above).

      Throws:
      XmlPullParserException
      IOException
      See Also:
    • require

      void require(int type, String namespace, String name) throws XmlPullParserException, IOException
      Test if the current event is of the given type and if the namespace and name do match. null will match any namespace and any name. If the test is not passed, an exception is thrown. The exception text indicates the parser position, the expected event and the current event that is not meeting the requirement.

      Essentially it does this

        if (type != getEventType()
        || (namespace != null &&  !namespace.equals( getNamespace () ) )
        || (name != null &&  !name.equals( getName() ) ) )
           throw new XmlPullParserException( "expected "+ TYPES[ type ]+getPositionDescription());
       
      Throws:
      XmlPullParserException
      IOException
    • nextText

      If current event is START_TAG then if next element is TEXT then element content is returned or if next event is END_TAG then empty string is returned, otherwise exception is thrown. After calling this function successfully parser will be positioned on END_TAG.

      The motivation for this function is to allow to parse consistently both empty elements and elements that has non empty content, for example for input:

      1. <tag>foo</tag>
      2. <tag></tag> (which is equivalent to <tag/> both input can be parsed with the same code:
           p.nextTag()
           p.requireEvent(p.START_TAG, "", "tag");
           String content = p.nextText();
           p.requireEvent(p.END_TAG, "", "tag");
         
        This function together with nextTag make it very easy to parse XML that has no mixed content.

        Essentially it does this

          if(getEventType() != START_TAG) {
             throw new XmlPullParserException(
               "parser must be on START_TAG to read next text", this, null);
          }
          int eventType = next();
          if(eventType == TEXT) {
             String result = getText();
             eventType = next();
             if(eventType != END_TAG) {
               throw new XmlPullParserException(
                  "event TEXT it must be immediately followed by END_TAG", this, null);
              }
              return result;
          } else if(eventType == END_TAG) {
             return "";
          } else {
             throw new XmlPullParserException(
               "parser must be on START_TAG or TEXT to read text", this, null);
          }
         
      Throws:
      XmlPullParserException
      IOException
    • nextTag

      int nextTag() throws XmlPullParserException, IOException
      Call next() and return event if it is START_TAG or END_TAG otherwise throw an exception. It will skip whitespace TEXT before actual tag if any.

      essentially it does this

         int eventType = next();
         if(eventType == TEXT &&  isWhitespace()) {   // skip whitespace
            eventType = next();
         }
         if (eventType != START_TAG &&  eventType != END_TAG) {
            throw new XmlPullParserException("expected start or end tag", this, null);
         }
         return eventType;
       
      Throws:
      XmlPullParserException
      IOException