org.jboss.netty.buffer
Interface ChannelBuffer

All Superinterfaces:
Comparable<ChannelBuffer>
All Known Subinterfaces:
WrappedChannelBuffer
All Known Implementing Classes:
AbstractChannelBuffer, BigEndianHeapChannelBuffer, ByteBufferBackedChannelBuffer, CompositeChannelBuffer, DuplicatedChannelBuffer, DynamicChannelBuffer, HeapChannelBuffer, LittleEndianHeapChannelBuffer, ReadOnlyChannelBuffer, SlicedChannelBuffer, TruncatedChannelBuffer

public interface ChannelBuffer
extends Comparable<ChannelBuffer>

A random and sequential accessible sequence of zero or more bytes (octets). This interface provides an abstract view for one or more primitive byte arrays (byte[]) and NIO buffers.

Creation of a buffer

It is recommended to create a new buffer using the helper methods in ChannelBuffers rather than calling an individual implementation's constructor.

Random Access Indexing

Just like an ordinary primitive byte array, ChannelBuffer uses zero-based indexing. It means the index of the first byte is always 0 and the index of the last byte is always capacity - 1. For example, to iterate all bytes of a buffer, you can do the following, regardless of its internal implementation:
 ChannelBuffer buffer = ...;
 for (int i = 0; i < buffer.capacity(); i ++) {
     byte b = buffer.getByte(i);
     System.out.println((char) b);
 }
 

Sequential Access Indexing

ChannelBuffer provides two pointer variables to support sequential read and write operations - readerIndex for a read operation and writerIndex for a write operation respectively. The following diagram shows how a buffer is segmented into three areas by the two pointers:
      +-------------------+------------------+------------------+
      | discardable bytes |  readable bytes  |  writable bytes  |
      |                   |     (CONTENT)    |                  |
      +-------------------+------------------+------------------+
      |                   |                  |                  |
      0      <=      readerIndex   <=   writerIndex    <=    capacity
 

Readable bytes (the actual content)

This segment is where the actual data is stored. Any operation whose name starts with read or skip will get or skip the data at the current readerIndex and increase it by the number of read bytes. If the argument of the read operation is also a ChannelBuffer and no destination index is specified, the specified buffer's readerIndex is increased together.

If there's not enough content left, IndexOutOfBoundsException is raised. The default value of newly allocated, wrapped or copied buffer's readerIndex is 0.

 // Iterates the readable bytes of a buffer.
 ChannelBuffer buffer = ...;
 while (buffer.readable()) {
     System.out.println(buffer.readByte());
 }
 

Writable bytes

This segment is a undefined space which needs to be filled. Any operation whose name ends with write will write the data at the current writerIndex and increase it by the number of written bytes. If the argument of the write operation is also a ChannelBuffer, and no source index is specified, the specified buffer's readerIndex is increased together.

If there's not enough writable bytes left, IndexOutOfBoundsException is raised. The default value of newly allocated buffer's writerIndex is 0. The default value of wrapped or copied buffer's writerIndex is the capacity of the buffer.

 // Fills the writable bytes of a buffer with random integers.
 ChannelBuffer buffer = ...;
 while (buffer.writableBytes() >= 4) {
     buffer.writeInt(random.nextInt());
 }
 

Discardable bytes

This segment contains the bytes which were read already by a read operation. Initially, the size of this segment is 0, but its size increases up to the writerIndex as read operations are executed. The read bytes can be discarded by calling discardReadBytes() to reclaim unused area as depicted by the following diagram:
  BEFORE discardReadBytes()

      +-------------------+------------------+------------------+
      | discardable bytes |  readable bytes  |  writable bytes  |
      +-------------------+------------------+------------------+
      |                   |                  |                  |
      0      <=      readerIndex   <=   writerIndex    <=    capacity


  AFTER discardReadBytes()

      +------------------+--------------------------------------+
      |  readable bytes  |    writable bytes (got more space)   |
      +------------------+--------------------------------------+
      |                  |                                      |
 readerIndex (0) <= writerIndex (decreased)        <=        capacity
 
Please note that there is no guarantee about the content of writable bytes after calling discardReadBytes(). The writable bytes will not be moved in most cases and could even be filled with completely different data depending on the underlying buffer implementation.

Clearing the buffer indexes

You can set both readerIndex and writerIndex to 0 by calling clear(). It does not clear the buffer content (e.g. filling with 0) but just clears the two pointers. Please also note that the semantic of this operation is different from Buffer.clear().
  BEFORE clear()

      +-------------------+------------------+------------------+
      | discardable bytes |  readable bytes  |  writable bytes  |
      +-------------------+------------------+------------------+
      |                   |                  |                  |
      0      <=      readerIndex   <=   writerIndex    <=    capacity


  AFTER clear()

      +---------------------------------------------------------+
      |             writable bytes (got more space)             |
      +---------------------------------------------------------+
      |                                                         |
      0 = readerIndex = writerIndex            <=            capacity
 

Search operations

Various indexOf(int, int, byte) methods help you locate an index of a value which meets a certain criteria. Complicated dynamic sequential search can be done with ChannelBufferIndexFinder as well as simple static single byte search.

If you are decoding variable length data such as NUL-terminated string, you will find bytesBefore(byte) also useful.

Mark and reset

There are two marker indexes in every buffer. One is for storing readerIndex and the other is for storing writerIndex. You can always reposition one of the two indexes by calling a reset method. It works in a similar fashion to the mark and reset methods in InputStream except that there's no readlimit.

Derived buffers

You can create a view of an existing buffer by calling either duplicate(), slice() or slice(int, int). A derived buffer will have an independent readerIndex, writerIndex and marker indexes, while it shares other internal data representation, just like a NIO buffer does.

In case a completely fresh copy of an existing buffer is required, please call copy() method instead.

Conversion to existing JDK types

Byte array

If a ChannelBuffer is backed by a byte array (i.e. byte[]), you can access it directly via the array() method. To determine if a buffer is backed by a byte array, hasArray() should be used.

NIO Buffers

Various toByteBuffer() and toByteBuffers() methods convert a ChannelBuffer into one or more NIO buffers. These methods avoid buffer allocation and memory copy whenever possible, but there's no guarantee that memory copy will not be involved.

Strings

Various toString(String) methods convert a ChannelBuffer into a String. Please note that toString() is not a conversion method.

I/O Streams

Please refer to ChannelBufferInputStream and ChannelBufferOutputStream.

Version:
$Rev: 2268 $, $Date: 2010-05-06 16:33:26 +0900 (Thu, 06 May 2010) $
Author:
The Netty Project, Trustin Lee

Method Summary
 byte[] array()
          Returns the backing byte array of this buffer.
 int arrayOffset()
          Returns the offset of the first byte within the backing byte array of this buffer.
 int bytesBefore(byte value)
          Locates the first occurrence of the specified value in this buffer.
 int bytesBefore(ChannelBufferIndexFinder indexFinder)
          Locates the first place where the specified indexFinder returns true.
 int bytesBefore(int length, byte value)
          Locates the first occurrence of the specified value in this buffer.
 int bytesBefore(int length, ChannelBufferIndexFinder indexFinder)
          Locates the first place where the specified indexFinder returns true.
 int bytesBefore(int index, int length, byte value)
          Locates the first occurrence of the specified value in this buffer.
 int bytesBefore(int index, int length, ChannelBufferIndexFinder indexFinder)
          Locates the first place where the specified indexFinder returns true.
 int capacity()
          Returns the number of bytes (octets) this buffer can contain.
 void clear()
          Sets the readerIndex and writerIndex of this buffer to 0.
 int compareTo(ChannelBuffer buffer)
          Compares the content of the specified buffer to the content of this buffer.
 ChannelBuffer copy()
          Returns a copy of this buffer's readable bytes.
 ChannelBuffer copy(int index, int length)
          Returns a copy of this buffer's sub-region.
 void discardReadBytes()
          Discards the bytes between the 0th index and readerIndex.
 ChannelBuffer duplicate()
          Returns a buffer which shares the whole region of this buffer.
 void ensureWritableBytes(int writableBytes)
          Makes sure the number of the writable bytes is equal to or greater than the specified value.
 boolean equals(Object obj)
          Determines if the content of the specified buffer is identical to the content of this array.
 ChannelBufferFactory factory()
          Returns the factory which creates a ChannelBuffer whose type and default ByteOrder are same with this buffer.
 byte getByte(int index)
          Gets a byte at the specified absolute index in this buffer.
 void getBytes(int index, byte[] dst)
          Transfers this buffer's data to the specified destination starting at the specified absolute index.
 void getBytes(int index, byte[] dst, int dstIndex, int length)
          Transfers this buffer's data to the specified destination starting at the specified absolute index.
 void getBytes(int index, ByteBuffer dst)
          Transfers this buffer's data to the specified destination starting at the specified absolute index until the destination's position reaches its limit.
 void getBytes(int index, ChannelBuffer dst)
          Transfers this buffer's data to the specified destination starting at the specified absolute index until the destination becomes non-writable.
 void getBytes(int index, ChannelBuffer dst, int length)
          Transfers this buffer's data to the specified destination starting at the specified absolute index.
 void getBytes(int index, ChannelBuffer dst, int dstIndex, int length)
          Transfers this buffer's data to the specified destination starting at the specified absolute index.
 int getBytes(int index, GatheringByteChannel out, int length)
          Transfers this buffer's data to the specified channel starting at the specified absolute index.
 void getBytes(int index, OutputStream out, int length)
          Transfers this buffer's data to the specified stream starting at the specified absolute index.
 char getChar(int index)
          Gets a 2-byte UTF-16 character at the specified absolute index in this buffer.
 double getDouble(int index)
          Gets a 64-bit floating point number at the specified absolute index in this buffer.
 float getFloat(int index)
          Gets a 32-bit floating point number at the specified absolute index in this buffer.
 int getInt(int index)
          Gets a 32-bit integer at the specified absolute index in this buffer.
 long getLong(int index)
          Gets a 64-bit long integer at the specified absolute index in this buffer.
 int getMedium(int index)
          Gets a 24-bit medium integer at the specified absolute index in this buffer.
 short getShort(int index)
          Gets a 16-bit short integer at the specified absolute index in this buffer.
 short getUnsignedByte(int index)
          Gets an unsigned byte at the specified absolute index in this buffer.
 long getUnsignedInt(int index)
          Gets an unsigned 32-bit integer at the specified absolute index in this buffer.
 int getUnsignedMedium(int index)
          Gets an unsigned 24-bit medium integer at the specified absolute index in this buffer.
 int getUnsignedShort(int index)
          Gets an unsigned 16-bit short integer at the specified absolute index in this buffer.
 boolean hasArray()
          Returns true if and only if this buffer has a backing byte array.
 int hashCode()
          Returns a hash code which was calculated from the content of this buffer.
 int indexOf(int fromIndex, int toIndex, byte value)
          Locates the first occurrence of the specified value in this buffer.
 int indexOf(int fromIndex, int toIndex, ChannelBufferIndexFinder indexFinder)
          Locates the first place where the specified indexFinder returns true.
 boolean isDirect()
          Returns true if and only if this buffer is backed by an NIO direct buffer.
 void markReaderIndex()
          Marks the current readerIndex in this buffer.
 void markWriterIndex()
          Marks the current writerIndex in this buffer.
 ByteOrder order()
          Returns the endianness of this buffer.
 boolean readable()
          Returns true if and only if (this.writerIndex - this.readerIndex) is greater than 0.
 int readableBytes()
          Returns the number of readable bytes which is equal to (this.writerIndex - this.readerIndex).
 byte readByte()
          Gets a byte at the current readerIndex and increases the readerIndex by 1 in this buffer.
 void readBytes(byte[] dst)
          Transfers this buffer's data to the specified destination starting at the current readerIndex and increases the readerIndex by the number of the transferred bytes (= dst.length).
 void readBytes(byte[] dst, int dstIndex, int length)
          Transfers this buffer's data to the specified destination starting at the current readerIndex and increases the readerIndex by the number of the transferred bytes (= length).
 void readBytes(ByteBuffer dst)
          Transfers this buffer's data to the specified destination starting at the current readerIndex until the destination's position reaches its limit, and increases the readerIndex by the number of the transferred bytes.
 void readBytes(ChannelBuffer dst)
          Transfers this buffer's data to the specified destination starting at the current readerIndex until the destination becomes non-writable, and increases the readerIndex by the number of the transferred bytes.
 ChannelBuffer readBytes(ChannelBufferIndexFinder indexFinder)
          Deprecated. Use bytesBefore(ChannelBufferIndexFinder) and readBytes(int) instead.
 void readBytes(ChannelBuffer dst, int length)
          Transfers this buffer's data to the specified destination starting at the current readerIndex and increases the readerIndex by the number of the transferred bytes (= length).
 void readBytes(ChannelBuffer dst, int dstIndex, int length)
          Transfers this buffer's data to the specified destination starting at the current readerIndex and increases the readerIndex by the number of the transferred bytes (= length).
 int readBytes(GatheringByteChannel out, int length)
          Transfers this buffer's data to the specified stream starting at the current readerIndex.
 ChannelBuffer readBytes(int length)
          Transfers this buffer's data to a newly created buffer starting at the current readerIndex and increases the readerIndex by the number of the transferred bytes (= length).
 void readBytes(OutputStream out, int length)
          Transfers this buffer's data to the specified stream starting at the current readerIndex.
 char readChar()
          Gets a 2-byte UTF-16 character at the current readerIndex and increases the readerIndex by 2 in this buffer.
 double readDouble()
          Gets a 64-bit floating point number at the current readerIndex and increases the readerIndex by 8 in this buffer.
 int readerIndex()
          Returns the readerIndex of this buffer.
 void readerIndex(int readerIndex)
          Sets the readerIndex of this buffer.
 float readFloat()
          Gets a 32-bit floating point number at the current readerIndex and increases the readerIndex by 4 in this buffer.
 int readInt()
          Gets a 32-bit integer at the current readerIndex and increases the readerIndex by 4 in this buffer.
 long readLong()
          Gets a 64-bit integer at the current readerIndex and increases the readerIndex by 8 in this buffer.
 int readMedium()
          Gets a 24-bit medium integer at the current readerIndex and increases the readerIndex by 3 in this buffer.
 short readShort()
          Gets a 16-bit short integer at the current readerIndex and increases the readerIndex by 2 in this buffer.
 ChannelBuffer readSlice(ChannelBufferIndexFinder indexFinder)
          Deprecated. Use bytesBefore(ChannelBufferIndexFinder) and readSlice(int) instead.
 ChannelBuffer readSlice(int length)
          Returns a new slice of this buffer's sub-region starting at the current readerIndex and increases the readerIndex by the size of the new slice (= length).
 short readUnsignedByte()
          Gets an unsigned byte at the current readerIndex and increases the readerIndex by 1 in this buffer.
 long readUnsignedInt()
          Gets an unsigned 32-bit integer at the current readerIndex and increases the readerIndex by 4 in this buffer.
 int readUnsignedMedium()
          Gets an unsigned 24-bit medium integer at the current readerIndex and increases the readerIndex by 3 in this buffer.
 int readUnsignedShort()
          Gets an unsigned 16-bit short integer at the current readerIndex and increases the readerIndex by 2 in this buffer.
 void resetReaderIndex()
          Repositions the current readerIndex to the marked readerIndex in this buffer.
 void resetWriterIndex()
          Repositions the current writerIndex to the marked writerIndex in this buffer.
 void setByte(int index, int value)
          Sets the specified byte at the specified absolute index in this buffer.
 void setBytes(int index, byte[] src)
          Transfers the specified source array's data to this buffer starting at the specified absolute index.
 void setBytes(int index, byte[] src, int srcIndex, int length)
          Transfers the specified source array's data to this buffer starting at the specified absolute index.
 void setBytes(int index, ByteBuffer src)
          Transfers the specified source buffer's data to this buffer starting at the specified absolute index until the source buffer's position reaches its limit.
 void setBytes(int index, ChannelBuffer src)
          Transfers the specified source buffer's data to this buffer starting at the specified absolute index until the source buffer becomes unreadable.
 void setBytes(int index, ChannelBuffer src, int length)
          Transfers the specified source buffer's data to this buffer starting at the specified absolute index.
 void setBytes(int index, ChannelBuffer src, int srcIndex, int length)
          Transfers the specified source buffer's data to this buffer starting at the specified absolute index.
 int setBytes(int index, InputStream in, int length)
          Transfers the content of the specified source stream to this buffer starting at the specified absolute index.
 int setBytes(int index, ScatteringByteChannel in, int length)
          Transfers the content of the specified source channel to this buffer starting at the specified absolute index.
 void setChar(int index, int value)
          Sets the specified 2-byte UTF-16 character at the specified absolute index in this buffer.
 void setDouble(int index, double value)
          Sets the specified 64-bit floating-point number at the specified absolute index in this buffer.
 void setFloat(int index, float value)
          Sets the specified 32-bit floating-point number at the specified absolute index in this buffer.
 void setIndex(int readerIndex, int writerIndex)
          Sets the readerIndex and writerIndex of this buffer in one shot.
 void setInt(int index, int value)
          Sets the specified 32-bit integer at the specified absolute index in this buffer.
 void setLong(int index, long value)
          Sets the specified 64-bit long integer at the specified absolute index in this buffer.
 void setMedium(int index, int value)
          Sets the specified 24-bit medium integer at the specified absolute index in this buffer.
 void setShort(int index, int value)
          Sets the specified 16-bit short integer at the specified absolute index in this buffer.
 void setZero(int index, int length)
          Fills this buffer with NUL (0x00) starting at the specified absolute index.
 int skipBytes(ChannelBufferIndexFinder indexFinder)
          Deprecated. Use bytesBefore(ChannelBufferIndexFinder) and skipBytes(int) instead.
 void skipBytes(int length)
          Increases the current readerIndex by the specified length in this buffer.
 ChannelBuffer slice()
          Returns a slice of this buffer's readable bytes.
 ChannelBuffer slice(int index, int length)
          Returns a slice of this buffer's sub-region.
 ByteBuffer toByteBuffer()
          Converts this buffer's readable bytes into a NIO buffer.
 ByteBuffer toByteBuffer(int index, int length)
          Converts this buffer's sub-region into a NIO buffer.
 ByteBuffer[] toByteBuffers()
          Converts this buffer's readable bytes into an array of NIO buffers.
 ByteBuffer[] toByteBuffers(int index, int length)
          Converts this buffer's sub-region into an array of NIO buffers.
 String toString()
          Returns the string representation of this buffer.
 String toString(Charset charset)
          Decodes this buffer's readable bytes into a string with the specified character set name.
 String toString(int index, int length, Charset charset)
          Decodes this buffer's sub-region into a string with the specified character set.
 String toString(int index, int length, String charsetName)
          Deprecated. Use bytesBefore(int, int, ChannelBufferIndexFinder) and toString(int, int, Charset) instead.
 String toString(int index, int length, String charsetName, ChannelBufferIndexFinder terminatorFinder)
          Deprecated. Use bytesBefore(int, int, ChannelBufferIndexFinder) and toString(int, int, Charset) instead.
 String toString(String charsetName)
          Deprecated. Use toString(Charset) instead.
 String toString(String charsetName, ChannelBufferIndexFinder terminatorFinder)
          Deprecated. Use bytesBefore(ChannelBufferIndexFinder) and toString(int, int, Charset) instead.
 boolean writable()
          Returns true if and only if (this.capacity - this.writerIndex) is greater than 0.
 int writableBytes()
          Returns the number of writable bytes which is equal to (this.capacity - this.writerIndex).
 void writeByte(int value)
          Sets the specified byte at the current writerIndex and increases the writerIndex by 1 in this buffer.
 void writeBytes(byte[] src)
          Transfers the specified source array's data to this buffer starting at the current writerIndex and increases the writerIndex by the number of the transferred bytes (= src.length).
 void writeBytes(byte[] src, int srcIndex, int length)
          Transfers the specified source array's data to this buffer starting at the current writerIndex and increases the writerIndex by the number of the transferred bytes (= length).
 void writeBytes(ByteBuffer src)
          Transfers the specified source buffer's data to this buffer starting at the current writerIndex until the source buffer's position reaches its limit, and increases the writerIndex by the number of the transferred bytes.
 void writeBytes(ChannelBuffer src)
          Transfers the specified source buffer's data to this buffer starting at the current writerIndex until the source buffer becomes unreadable, and increases the writerIndex by the number of the transferred bytes.
 void writeBytes(ChannelBuffer src, int length)
          Transfers the specified source buffer's data to this buffer starting at the current writerIndex and increases the writerIndex by the number of the transferred bytes (= length).
 void writeBytes(ChannelBuffer src, int srcIndex, int length)
          Transfers the specified source buffer's data to this buffer starting at the current writerIndex and increases the writerIndex by the number of the transferred bytes (= length).
 int writeBytes(InputStream in, int length)
          Transfers the content of the specified stream to this buffer starting at the current writerIndex and increases the writerIndex by the number of the transferred bytes.
 int writeBytes(ScatteringByteChannel in, int length)
          Transfers the content of the specified channel to this buffer starting at the current writerIndex and increases the writerIndex by the number of the transferred bytes.
 void writeChar(int value)
          Sets the specified 2-byte UTF-16 character at the current writerIndex and increases the writerIndex by 2 in this buffer.
 void writeDouble(double value)
          Sets the specified 64-bit floating point number at the current writerIndex and increases the writerIndex by 8 in this buffer.
 void writeFloat(float value)
          Sets the specified 32-bit floating point number at the current writerIndex and increases the writerIndex by 4 in this buffer.
 void writeInt(int value)
          Sets the specified 32-bit integer at the current writerIndex and increases the writerIndex by 4 in this buffer.
 void writeLong(long value)
          Sets the specified 64-bit long integer at the current writerIndex and increases the writerIndex by 8 in this buffer.
 void writeMedium(int value)
          Sets the specified 24-bit medium integer at the current writerIndex and increases the writerIndex by 3 in this buffer.
 int writerIndex()
          Returns the writerIndex of this buffer.
 void writerIndex(int writerIndex)
          Sets the writerIndex of this buffer.
 void writeShort(int value)
          Sets the specified 16-bit short integer at the current writerIndex and increases the writerIndex by 2 in this buffer.
 void writeZero(int length)
          Fills this buffer with NUL (0x00) starting at the current writerIndex and increases the writerIndex by the specified length.
 

Method Detail

factory

ChannelBufferFactory factory()
Returns the factory which creates a ChannelBuffer whose type and default ByteOrder are same with this buffer.


capacity

int capacity()
Returns the number of bytes (octets) this buffer can contain.


order

ByteOrder order()
Returns the endianness of this buffer.


isDirect

boolean isDirect()
Returns true if and only if this buffer is backed by an NIO direct buffer.


readerIndex

int readerIndex()
Returns the readerIndex of this buffer.


readerIndex

void readerIndex(int readerIndex)
Sets the readerIndex of this buffer.

Throws:
IndexOutOfBoundsException - if the specified readerIndex is less than 0 or greater than this.writerIndex

writerIndex

int writerIndex()
Returns the writerIndex of this buffer.


writerIndex

void writerIndex(int writerIndex)
Sets the writerIndex of this buffer.

Throws:
IndexOutOfBoundsException - if the specified writerIndex is less than this.readerIndex or greater than this.capacity

setIndex

void setIndex(int readerIndex,
              int writerIndex)
Sets the readerIndex and writerIndex of this buffer in one shot. This method is useful when you have to worry about the invocation order of readerIndex(int) and writerIndex(int) methods. For example, the following code will fail:
 // Create a buffer whose readerIndex, writerIndex and capacity are
 // 0, 0 and 8 respectively.
 ChannelBuffer buf = ChannelBuffers.buffer(8);

 // IndexOutOfBoundsException is thrown because the specified
 // readerIndex (2) cannot be greater than the current writerIndex (0).
 buf.readerIndex(2);
 buf.writerIndex(4);
 
The following code will also fail:
 // Create a buffer whose readerIndex, writerIndex and capacity are
 // 0, 8 and 8 respectively.
 ChannelBuffer buf = ChannelBuffers.wrappedBuffer(new byte[8]);

 // readerIndex becomes 8.
 buf.readLong();

 // IndexOutOfBoundsException is thrown because the specified
 // writerIndex (4) cannot be less than the current readerIndex (8).
 buf.writerIndex(4);
 buf.readerIndex(2);
 
By contrast, setIndex(int, int) guarantees that it never throws an IndexOutOfBoundsException as long as the specified indexes meet basic constraints, regardless what the current index values of the buffer are:
 // No matter what the current state of the buffer is, the following
 // call always succeeds as long as the capacity of the buffer is not
 // less than 4.
 buf.setIndex(2, 4);
 

Throws:
IndexOutOfBoundsException - if the specified readerIndex is less than 0, if the specified writerIndex is less than the specified readerIndex or if the specified writerIndex is greater than this.capacity

readableBytes

int readableBytes()
Returns the number of readable bytes which is equal to (this.writerIndex - this.readerIndex).


writableBytes

int writableBytes()
Returns the number of writable bytes which is equal to (this.capacity - this.writerIndex).


readable

boolean readable()
Returns true if and only if (this.writerIndex - this.readerIndex) is greater than 0.


writable

boolean writable()
Returns true if and only if (this.capacity - this.writerIndex) is greater than 0.


clear

void clear()
Sets the readerIndex and writerIndex of this buffer to 0. This method is identical to setIndex(0, 0).

Please note that the behavior of this method is different from that of NIO buffer, which sets the limit to the capacity of the buffer.


markReaderIndex

void markReaderIndex()
Marks the current readerIndex in this buffer. You can reposition the current readerIndex to the marked readerIndex by calling resetReaderIndex(). The initial value of the marked readerIndex is 0.


resetReaderIndex

void resetReaderIndex()
Repositions the current readerIndex to the marked readerIndex in this buffer.

Throws:
IndexOutOfBoundsException - if the current writerIndex is less than the marked readerIndex

markWriterIndex

void markWriterIndex()
Marks the current writerIndex in this buffer. You can reposition the current writerIndex to the marked writerIndex by calling resetWriterIndex(). The initial value of the marked writerIndex is 0.


resetWriterIndex

void resetWriterIndex()
Repositions the current writerIndex to the marked writerIndex in this buffer.

Throws:
IndexOutOfBoundsException - if the current readerIndex is greater than the marked writerIndex

discardReadBytes

void discardReadBytes()
Discards the bytes between the 0th index and readerIndex. It moves the bytes between readerIndex and writerIndex to the 0th index, and sets readerIndex and writerIndex to 0 and oldWriterIndex - oldReaderIndex respectively.

Please refer to the class documentation for more detailed explanation.


ensureWritableBytes

void ensureWritableBytes(int writableBytes)
Makes sure the number of the writable bytes is equal to or greater than the specified value. If there is enough writable bytes in this buffer, this method returns with no side effect. Otherwise:

Parameters:
writableBytes - the expected minimum number of writable bytes
Throws:
IndexOutOfBoundsException - if the writable bytes of this buffer is less than the specified value and if this buffer is not a dynamic buffer

getByte

byte getByte(int index)
Gets a byte at the specified absolute index in this buffer. This method does not modify readerIndex or writerIndex of this buffer.

Throws:
IndexOutOfBoundsException - if the specified index is less than 0 or index + 1 is greater than this.capacity

getUnsignedByte

short getUnsignedByte(int index)
Gets an unsigned byte at the specified absolute index in this buffer. This method does not modify readerIndex or writerIndex of this buffer.

Throws:
IndexOutOfBoundsException - if the specified index is less than 0 or index + 1 is greater than this.capacity

getShort

short getShort(int index)
Gets a 16-bit short integer at the specified absolute index in this buffer. This method does not modify readerIndex or writerIndex of this buffer.

Throws:
IndexOutOfBoundsException - if the specified index is less than 0 or index + 2 is greater than this.capacity

getUnsignedShort

int getUnsignedShort(int index)
Gets an unsigned 16-bit short integer at the specified absolute index in this buffer. This method does not modify readerIndex or writerIndex of this buffer.

Throws:
IndexOutOfBoundsException - if the specified index is less than 0 or index + 2 is greater than this.capacity

getMedium

int getMedium(int index)
Gets a 24-bit medium integer at the specified absolute index in this buffer. This method does not modify readerIndex or writerIndex of this buffer.

Throws:
IndexOutOfBoundsException - if the specified index is less than 0 or index + 3 is greater than this.capacity

getUnsignedMedium

int getUnsignedMedium(int index)
Gets an unsigned 24-bit medium integer at the specified absolute index in this buffer. This method does not modify readerIndex or writerIndex of this buffer.

Throws:
IndexOutOfBoundsException - if the specified index is less than 0 or index + 3 is greater than this.capacity

getInt

int getInt(int index)
Gets a 32-bit integer at the specified absolute index in this buffer. This method does not modify readerIndex or writerIndex of this buffer.

Throws:
IndexOutOfBoundsException - if the specified index is less than 0 or index + 4 is greater than this.capacity

getUnsignedInt

long getUnsignedInt(int index)
Gets an unsigned 32-bit integer at the specified absolute index in this buffer. This method does not modify readerIndex or writerIndex of this buffer.

Throws:
IndexOutOfBoundsException - if the specified index is less than 0 or index + 4 is greater than this.capacity

getLong

long getLong(int index)
Gets a 64-bit long integer at the specified absolute index in this buffer. This method does not modify readerIndex or writerIndex of this buffer.

Throws:
IndexOutOfBoundsException - if the specified index is less than 0 or index + 8 is greater than this.capacity

getChar

char getChar(int index)
Gets a 2-byte UTF-16 character at the specified absolute index in this buffer. This method does not modify readerIndex or writerIndex of this buffer.

Throws:
IndexOutOfBoundsException - if the specified index is less than 0 or index + 2 is greater than this.capacity

getFloat

float getFloat(int index)
Gets a 32-bit floating point number at the specified absolute index in this buffer. This method does not modify readerIndex or writerIndex of this buffer.

Throws:
IndexOutOfBoundsException - if the specified index is less than 0 or index + 4 is greater than this.capacity

getDouble

double getDouble(int index)
Gets a 64-bit floating point number at the specified absolute index in this buffer. This method does not modify readerIndex or writerIndex of this buffer.

Throws:
IndexOutOfBoundsException - if the specified index is less than 0 or index + 8 is greater than this.capacity

getBytes

void getBytes(int index,
              ChannelBuffer dst)
Transfers this buffer's data to the specified destination starting at the specified absolute index until the destination becomes non-writable. This method is basically same with getBytes(int, ChannelBuffer, int, int), except that this method increases the writerIndex of the destination by the number of the transferred bytes while getBytes(int, ChannelBuffer, int, int) does not. This method does not modify readerIndex or writerIndex of the source buffer (i.e. this).

Throws:
IndexOutOfBoundsException - if the specified index is less than 0 or if index + dst.writableBytes is greater than this.capacity

getBytes

void getBytes(int index,
              ChannelBuffer dst,
              int length)
Transfers this buffer's data to the specified destination starting at the specified absolute index. This method is basically same with getBytes(int, ChannelBuffer, int, int), except that this method increases the writerIndex of the destination by the number of the transferred bytes while getBytes(int, ChannelBuffer, int, int) does not. This method does not modify readerIndex or writerIndex of the source buffer (i.e. this).

Parameters:
length - the number of bytes to transfer
Throws:
IndexOutOfBoundsException - if the specified index is less than 0, if index + length is greater than this.capacity, or if length is greater than dst.writableBytes

getBytes

void getBytes(int index,
              ChannelBuffer dst,
              int dstIndex,
              int length)
Transfers this buffer's data to the specified destination starting at the specified absolute index. This method does not modify readerIndex or writerIndex of both the source (i.e. this) and the destination.

Parameters:
dstIndex - the first index of the destination
length - the number of bytes to transfer
Throws:
IndexOutOfBoundsException - if the specified index is less than 0, if the specified dstIndex is less than 0, if index + length is greater than this.capacity, or if dstIndex + length is greater than dst.capacity

getBytes

void getBytes(int index,
              byte[] dst)
Transfers this buffer's data to the specified destination starting at the specified absolute index. This method does not modify readerIndex or writerIndex of this buffer

Throws:
IndexOutOfBoundsException - if the specified index is less than 0 or if index + dst.length is greater than this.capacity

getBytes

void getBytes(int index,
              byte[] dst,
              int dstIndex,
              int length)
Transfers this buffer's data to the specified destination starting at the specified absolute index. This method does not modify readerIndex or writerIndex of this buffer.

Parameters:
dstIndex - the first index of the destination
length - the number of bytes to transfer
Throws:
IndexOutOfBoundsException - if the specified index is less than 0, if the specified dstIndex is less than 0, if index + length is greater than this.capacity, or if dstIndex + length is greater than dst.length

getBytes

void getBytes(int index,
              ByteBuffer dst)
Transfers this buffer's data to the specified destination starting at the specified absolute index until the destination's position reaches its limit. This method does not modify readerIndex or writerIndex of this buffer while the destination's position will be increased.

Throws:
IndexOutOfBoundsException - if the specified index is less than 0 or if index + dst.remaining() is greater than this.capacity

getBytes

void getBytes(int index,
              OutputStream out,
              int length)
              throws IOException
Transfers this buffer's data to the specified stream starting at the specified absolute index. This method does not modify readerIndex or writerIndex of this buffer.

Parameters:
length - the number of bytes to transfer
Throws:
IndexOutOfBoundsException - if the specified index is less than 0 or if index + length is greater than this.capacity
IOException - if the specified stream threw an exception during I/O

getBytes

int getBytes(int index,
             GatheringByteChannel out,
             int length)
             throws IOException
Transfers this buffer's data to the specified channel starting at the specified absolute index. This method does not modify readerIndex or writerIndex of this buffer.

Parameters:
length - the maximum number of bytes to transfer
Returns:
the actual number of bytes written out to the specified channel
Throws:
IndexOutOfBoundsException - if the specified index is less than 0 or if index + length is greater than this.capacity
IOException - if the specified channel threw an exception during I/O

setByte

void setByte(int index,
             int value)
Sets the specified byte at the specified absolute index in this buffer. The 24 high-order bits of the specified value are ignored. This method does not modify readerIndex or writerIndex of this buffer.

Throws:
IndexOutOfBoundsException - if the specified index is less than 0 or index + 1 is greater than this.capacity

setShort

void setShort(int index,
              int value)
Sets the specified 16-bit short integer at the specified absolute index in this buffer. The 16 high-order bits of the specified value are ignored. This method does not modify readerIndex or writerIndex of this buffer.

Throws:
IndexOutOfBoundsException - if the specified index is less than 0 or index + 2 is greater than this.capacity

setMedium

void setMedium(int index,
               int value)
Sets the specified 24-bit medium integer at the specified absolute index in this buffer. Please note that the most significant byte is ignored in the specified value. This method does not modify readerIndex or writerIndex of this buffer.

Throws:
IndexOutOfBoundsException - if the specified index is less than 0 or index + 3 is greater than this.capacity

setInt

void setInt(int index,
            int value)
Sets the specified 32-bit integer at the specified absolute index in this buffer. This method does not modify readerIndex or writerIndex of this buffer.

Throws:
IndexOutOfBoundsException - if the specified index is less than 0 or index + 4 is greater than this.capacity

setLong

void setLong(int index,
             long value)
Sets the specified 64-bit long integer at the specified absolute index in this buffer. This method does not modify readerIndex or writerIndex of this buffer.

Throws:
IndexOutOfBoundsException - if the specified index is less than 0 or index + 8 is greater than this.capacity

setChar

void setChar(int index,
             int value)
Sets the specified 2-byte UTF-16 character at the specified absolute index in this buffer. The 16 high-order bits of the specified value are ignored. This method does not modify readerIndex or writerIndex of this buffer.

Throws:
IndexOutOfBoundsException - if the specified index is less than 0 or index + 2 is greater than this.capacity

setFloat

void setFloat(int index,
              float value)
Sets the specified 32-bit floating-point number at the specified absolute index in this buffer. This method does not modify readerIndex or writerIndex of this buffer.

Throws:
IndexOutOfBoundsException - if the specified index is less than 0 or index + 4 is greater than this.capacity

setDouble

void setDouble(int index,
               double value)
Sets the specified 64-bit floating-point number at the specified absolute index in this buffer. This method does not modify readerIndex or writerIndex of this buffer.

Throws:
IndexOutOfBoundsException - if the specified index is less than 0 or index + 8 is greater than this.capacity

setBytes

void setBytes(int index,
              ChannelBuffer src)
Transfers the specified source buffer's data to this buffer starting at the specified absolute index until the source buffer becomes unreadable. This method is basically same with setBytes(int, ChannelBuffer, int, int), except that this method increases the readerIndex of the source buffer by the number of the transferred bytes while setBytes(int, ChannelBuffer, int, int) does not. This method does not modify readerIndex or writerIndex of the source buffer (i.e. this).

Throws:
IndexOutOfBoundsException - if the specified index is less than 0 or if index + src.readableBytes is greater than this.capacity

setBytes

void setBytes(int index,
              ChannelBuffer src,
              int length)
Transfers the specified source buffer's data to this buffer starting at the specified absolute index. This method is basically same with setBytes(int, ChannelBuffer, int, int), except that this method increases the readerIndex of the source buffer by the number of the transferred bytes while setBytes(int, ChannelBuffer, int, int) does not. This method does not modify readerIndex or writerIndex of the source buffer (i.e. this).

Parameters:
length - the number of bytes to transfer
Throws:
IndexOutOfBoundsException - if the specified index is less than 0, if index + length is greater than this.capacity, or if length is greater than src.readableBytes

setBytes

void setBytes(int index,
              ChannelBuffer src,
              int srcIndex,
              int length)
Transfers the specified source buffer's data to this buffer starting at the specified absolute index. This method does not modify readerIndex or writerIndex of both the source (i.e. this) and the destination.

Parameters:
srcIndex - the first index of the source
length - the number of bytes to transfer
Throws:
IndexOutOfBoundsException - if the specified index is less than 0, if the specified srcIndex is less than 0, if index + length is greater than this.capacity, or if srcIndex + length is greater than src.capacity

setBytes

void setBytes(int index,
              byte[] src)
Transfers the specified source array's data to this buffer starting at the specified absolute index. This method does not modify readerIndex or writerIndex of this buffer.

Throws:
IndexOutOfBoundsException - if the specified index is less than 0 or if index + src.length is greater than this.capacity

setBytes

void setBytes(int index,
              byte[] src,
              int srcIndex,
              int length)
Transfers the specified source array's data to this buffer starting at the specified absolute index. This method does not modify readerIndex or writerIndex of this buffer.

Throws:
IndexOutOfBoundsException - if the specified index is less than 0, if the specified srcIndex is less than 0, if index + length is greater than this.capacity, or if srcIndex + length is greater than src.length

setBytes

void setBytes(int index,
              ByteBuffer src)
Transfers the specified source buffer's data to this buffer starting at the specified absolute index until the source buffer's position reaches its limit. This method does not modify readerIndex or writerIndex of this buffer.

Throws:
IndexOutOfBoundsException - if the specified index is less than 0 or if index + src.remaining() is greater than this.capacity

setBytes

int setBytes(int index,
             InputStream in,
             int length)
             throws IOException
Transfers the content of the specified source stream to this buffer starting at the specified absolute index. This method does not modify readerIndex or writerIndex of this buffer.

Parameters:
length - the number of bytes to transfer
Returns:
the actual number of bytes read in from the specified channel. -1 if the specified channel is closed.
Throws:
IndexOutOfBoundsException - if the specified index is less than 0 or if index + length is greater than this.capacity
IOException - if the specified stream threw an exception during I/O

setBytes

int setBytes(int index,
             ScatteringByteChannel in,
             int length)
             throws IOException
Transfers the content of the specified source channel to this buffer starting at the specified absolute index. This method does not modify readerIndex or writerIndex of this buffer.

Parameters:
length - the maximum number of bytes to transfer
Returns:
the actual number of bytes read in from the specified channel. -1 if the specified channel is closed.
Throws:
IndexOutOfBoundsException - if the specified index is less than 0 or if index + length is greater than this.capacity
IOException - if the specified channel threw an exception during I/O

setZero

void setZero(int index,
             int length)
Fills this buffer with NUL (0x00) starting at the specified absolute index. This method does not modify readerIndex or writerIndex of this buffer.

Parameters:
length - the number of NULs to write to the buffer
Throws:
IndexOutOfBoundsException - if the specified index is less than 0 or if index + length is greater than this.capacity

readByte

byte readByte()
Gets a byte at the current readerIndex and increases the readerIndex by 1 in this buffer.

Throws:
IndexOutOfBoundsException - if this.readableBytes is less than 1

readUnsignedByte

short readUnsignedByte()
Gets an unsigned byte at the current readerIndex and increases the readerIndex by 1 in this buffer.

Throws:
IndexOutOfBoundsException - if this.readableBytes is less than 1

readShort

short readShort()
Gets a 16-bit short integer at the current readerIndex and increases the readerIndex by 2 in this buffer.

Throws:
IndexOutOfBoundsException - if this.readableBytes is less than 2

readUnsignedShort

int readUnsignedShort()
Gets an unsigned 16-bit short integer at the current readerIndex and increases the readerIndex by 2 in this buffer.

Throws:
IndexOutOfBoundsException - if this.readableBytes is less than 2

readMedium

int readMedium()
Gets a 24-bit medium integer at the current readerIndex and increases the readerIndex by 3 in this buffer.

Throws:
IndexOutOfBoundsException - if this.readableBytes is less than 3

readUnsignedMedium

int readUnsignedMedium()
Gets an unsigned 24-bit medium integer at the current readerIndex and increases the readerIndex by 3 in this buffer.

Throws:
IndexOutOfBoundsException - if this.readableBytes is less than 3

readInt

int readInt()
Gets a 32-bit integer at the current readerIndex and increases the readerIndex by 4 in this buffer.

Throws:
IndexOutOfBoundsException - if this.readableBytes is less than 4

readUnsignedInt

long readUnsignedInt()
Gets an unsigned 32-bit integer at the current readerIndex and increases the readerIndex by 4 in this buffer.

Throws:
IndexOutOfBoundsException - if this.readableBytes is less than 4

readLong

long readLong()
Gets a 64-bit integer at the current readerIndex and increases the readerIndex by 8 in this buffer.

Throws:
IndexOutOfBoundsException - if this.readableBytes is less than 8

readChar

char readChar()
Gets a 2-byte UTF-16 character at the current readerIndex and increases the readerIndex by 2 in this buffer.

Throws:
IndexOutOfBoundsException - if this.readableBytes is less than 2

readFloat

float readFloat()
Gets a 32-bit floating point number at the current readerIndex and increases the readerIndex by 4 in this buffer.

Throws:
IndexOutOfBoundsException - if this.readableBytes is less than 4

readDouble

double readDouble()
Gets a 64-bit floating point number at the current readerIndex and increases the readerIndex by 8 in this buffer.

Throws:
IndexOutOfBoundsException - if this.readableBytes is less than 8

readBytes

ChannelBuffer readBytes(int length)
Transfers this buffer's data to a newly created buffer starting at the current readerIndex and increases the readerIndex by the number of the transferred bytes (= length). The returned buffer's readerIndex and writerIndex are 0 and length respectively.

Parameters:
length - the number of bytes to transfer
Returns:
the newly created buffer which contains the transferred bytes
Throws:
IndexOutOfBoundsException - if length is greater than this.readableBytes

readBytes

@Deprecated
ChannelBuffer readBytes(ChannelBufferIndexFinder indexFinder)
Deprecated. Use bytesBefore(ChannelBufferIndexFinder) and readBytes(int) instead.


readSlice

ChannelBuffer readSlice(int length)
Returns a new slice of this buffer's sub-region starting at the current readerIndex and increases the readerIndex by the size of the new slice (= length).

Parameters:
length - the size of the new slice
Returns:
the newly created slice
Throws:
IndexOutOfBoundsException - if length is greater than this.readableBytes

readSlice

@Deprecated
ChannelBuffer readSlice(ChannelBufferIndexFinder indexFinder)
Deprecated. Use bytesBefore(ChannelBufferIndexFinder) and readSlice(int) instead.


readBytes

void readBytes(ChannelBuffer dst)
Transfers this buffer's data to the specified destination starting at the current readerIndex until the destination becomes non-writable, and increases the readerIndex by the number of the transferred bytes. This method is basically same with readBytes(ChannelBuffer, int, int), except that this method increases the writerIndex of the destination by the number of the transferred bytes while readBytes(ChannelBuffer, int, int) does not.

Throws:
IndexOutOfBoundsException - if dst.writableBytes is greater than this.readableBytes

readBytes

void readBytes(ChannelBuffer dst,
               int length)
Transfers this buffer's data to the specified destination starting at the current readerIndex and increases the readerIndex by the number of the transferred bytes (= length). This method is basically same with readBytes(ChannelBuffer, int, int), except that this method increases the writerIndex of the destination by the number of the transferred bytes (= length) while readBytes(ChannelBuffer, int, int) does not.

Throws:
IndexOutOfBoundsException - if length is greater than this.readableBytes or if length is greater than dst.writableBytes

readBytes

void readBytes(ChannelBuffer dst,
               int dstIndex,
               int length)
Transfers this buffer's data to the specified destination starting at the current readerIndex and increases the readerIndex by the number of the transferred bytes (= length).

Parameters:
dstIndex - the first index of the destination
length - the number of bytes to transfer
Throws:
IndexOutOfBoundsException - if the specified dstIndex is less than 0, if length is greater than this.readableBytes, or if dstIndex + length is greater than dst.capacity

readBytes

void readBytes(byte[] dst)
Transfers this buffer's data to the specified destination starting at the current readerIndex and increases the readerIndex by the number of the transferred bytes (= dst.length).

Throws:
IndexOutOfBoundsException - if dst.length is greater than this.readableBytes

readBytes

void readBytes(byte[] dst,
               int dstIndex,
               int length)
Transfers this buffer's data to the specified destination starting at the current readerIndex and increases the readerIndex by the number of the transferred bytes (= length).

Parameters:
dstIndex - the first index of the destination
length - the number of bytes to transfer
Throws:
IndexOutOfBoundsException - if the specified dstIndex is less than 0, if length is greater than this.readableBytes, or if dstIndex + length is greater than dst.length

readBytes

void readBytes(ByteBuffer dst)
Transfers this buffer's data to the specified destination starting at the current readerIndex until the destination's position reaches its limit, and increases the readerIndex by the number of the transferred bytes.

Throws:
IndexOutOfBoundsException - if dst.remaining() is greater than this.readableBytes

readBytes

void readBytes(OutputStream out,
               int length)
               throws IOException
Transfers this buffer's data to the specified stream starting at the current readerIndex.

Parameters:
length - the number of bytes to transfer
Throws:
IndexOutOfBoundsException - if length is greater than this.readableBytes
IOException - if the specified stream threw an exception during I/O

readBytes

int readBytes(GatheringByteChannel out,
              int length)
              throws IOException
Transfers this buffer's data to the specified stream starting at the current readerIndex.

Parameters:
length - the maximum number of bytes to transfer
Returns:
the actual number of bytes written out to the specified channel
Throws:
IndexOutOfBoundsException - if length is greater than this.readableBytes
IOException - if the specified channel threw an exception during I/O

skipBytes

void skipBytes(int length)
Increases the current readerIndex by the specified length in this buffer.

Throws:
IndexOutOfBoundsException - if length is greater than this.readableBytes

skipBytes

@Deprecated
int skipBytes(ChannelBufferIndexFinder indexFinder)
Deprecated. Use bytesBefore(ChannelBufferIndexFinder) and skipBytes(int) instead.


writeByte

void writeByte(int value)
Sets the specified byte at the current writerIndex and increases the writerIndex by 1 in this buffer. The 24 high-order bits of the specified value are ignored.

Throws:
IndexOutOfBoundsException - if this.writableBytes is less than 1

writeShort

void writeShort(int value)
Sets the specified 16-bit short integer at the current writerIndex and increases the writerIndex by 2 in this buffer. The 16 high-order bits of the specified value are ignored.

Throws:
IndexOutOfBoundsException - if this.writableBytes is less than 2

writeMedium

void writeMedium(int value)
Sets the specified 24-bit medium integer at the current writerIndex and increases the writerIndex by 3 in this buffer.

Throws:
IndexOutOfBoundsException - if this.writableBytes is less than 3

writeInt

void writeInt(int value)
Sets the specified 32-bit integer at the current writerIndex and increases the writerIndex by 4 in this buffer.

Throws:
IndexOutOfBoundsException - if this.writableBytes is less than 4

writeLong

void writeLong(long value)
Sets the specified 64-bit long integer at the current writerIndex and increases the writerIndex by 8 in this buffer.

Throws:
IndexOutOfBoundsException - if this.writableBytes is less than 8

writeChar

void writeChar(int value)
Sets the specified 2-byte UTF-16 character at the current writerIndex and increases the writerIndex by 2 in this buffer. The 16 high-order bits of the specified value are ignored.

Throws:
IndexOutOfBoundsException - if this.writableBytes is less than 2

writeFloat

void writeFloat(float value)
Sets the specified 32-bit floating point number at the current writerIndex and increases the writerIndex by 4 in this buffer.

Throws:
IndexOutOfBoundsException - if this.writableBytes is less than 4

writeDouble

void writeDouble(double value)
Sets the specified 64-bit floating point number at the current writerIndex and increases the writerIndex by 8 in this buffer.

Throws:
IndexOutOfBoundsException - if this.writableBytes is less than 8

writeBytes

void writeBytes(ChannelBuffer src)
Transfers the specified source buffer's data to this buffer starting at the current writerIndex until the source buffer becomes unreadable, and increases the writerIndex by the number of the transferred bytes. This method is basically same with writeBytes(ChannelBuffer, int, int), except that this method increases the readerIndex of the source buffer by the number of the transferred bytes while writeBytes(ChannelBuffer, int, int) does not.

Throws:
IndexOutOfBoundsException - if src.readableBytes is greater than this.writableBytes

writeBytes

void writeBytes(ChannelBuffer src,
                int length)
Transfers the specified source buffer's data to this buffer starting at the current writerIndex and increases the writerIndex by the number of the transferred bytes (= length). This method is basically same with writeBytes(ChannelBuffer, int, int), except that this method increases the readerIndex of the source buffer by the number of the transferred bytes (= length) while writeBytes(ChannelBuffer, int, int) does not.

Parameters:
length - the number of bytes to transfer
Throws:
IndexOutOfBoundsException - if length is greater than this.writableBytes or if length is greater then src.readableBytes

writeBytes

void writeBytes(ChannelBuffer src,
                int srcIndex,
                int length)
Transfers the specified source buffer's data to this buffer starting at the current writerIndex and increases the writerIndex by the number of the transferred bytes (= length).

Parameters:
srcIndex - the first index of the source
length - the number of bytes to transfer
Throws:
IndexOutOfBoundsException - if the specified srcIndex is less than 0, if srcIndex + length is greater than src.capacity, or if length is greater than this.writableBytes

writeBytes

void writeBytes(byte[] src)
Transfers the specified source array's data to this buffer starting at the current writerIndex and increases the writerIndex by the number of the transferred bytes (= src.length).

Throws:
IndexOutOfBoundsException - if src.length is greater than this.writableBytes

writeBytes

void writeBytes(byte[] src,
                int srcIndex,
                int length)
Transfers the specified source array's data to this buffer starting at the current writerIndex and increases the writerIndex by the number of the transferred bytes (= length).

Parameters:
srcIndex - the first index of the source
length - the number of bytes to transfer
Throws:
IndexOutOfBoundsException - if the specified srcIndex is less than 0, if srcIndex + length is greater than src.length, or if length is greater than this.writableBytes

writeBytes

void writeBytes(ByteBuffer src)
Transfers the specified source buffer's data to this buffer starting at the current writerIndex until the source buffer's position reaches its limit, and increases the writerIndex by the number of the transferred bytes.

Throws:
IndexOutOfBoundsException - if src.remaining() is greater than this.writableBytes

writeBytes

int writeBytes(InputStream in,
               int length)
               throws IOException
Transfers the content of the specified stream to this buffer starting at the current writerIndex and increases the writerIndex by the number of the transferred bytes.

Parameters:
length - the number of bytes to transfer
Returns:
the actual number of bytes read in from the specified stream
Throws:
IndexOutOfBoundsException - if length is greater than this.writableBytes
IOException - if the specified stream threw an exception during I/O

writeBytes

int writeBytes(ScatteringByteChannel in,
               int length)
               throws IOException
Transfers the content of the specified channel to this buffer starting at the current writerIndex and increases the writerIndex by the number of the transferred bytes.

Parameters:
length - the maximum number of bytes to transfer
Returns:
the actual number of bytes read in from the specified channel
Throws:
IndexOutOfBoundsException - if length is greater than this.writableBytes
IOException - if the specified channel threw an exception during I/O

writeZero

void writeZero(int length)
Fills this buffer with NUL (0x00) starting at the current writerIndex and increases the writerIndex by the specified length.

Parameters:
length - the number of NULs to write to the buffer
Throws:
IndexOutOfBoundsException - if length is greater than this.writableBytes

indexOf

int indexOf(int fromIndex,
            int toIndex,
            byte value)
Locates the first occurrence of the specified value in this buffer. The search takes place from the specified fromIndex (inclusive) to the specified toIndex (exclusive).

If fromIndex is greater than toIndex, the search is performed in a reversed order.

This method does not modify readerIndex or writerIndex of this buffer.

Returns:
the absolute index of the first occurrence if found. -1 otherwise.

indexOf

int indexOf(int fromIndex,
            int toIndex,
            ChannelBufferIndexFinder indexFinder)
Locates the first place where the specified indexFinder returns true. The search takes place from the specified fromIndex (inclusive) to the specified toIndex (exclusive).

If fromIndex is greater than toIndex, the search is performed in a reversed order.

This method does not modify readerIndex or writerIndex of this buffer.

Returns:
the absolute index where the specified indexFinder returned true. -1 if the indexFinder did not return true at all.

bytesBefore

int bytesBefore(byte value)
Locates the first occurrence of the specified value in this buffer. The search takes place from the current readerIndex (inclusive) to the current writerIndex (exclusive).

This method does not modify readerIndex or writerIndex of this buffer.

Returns:
the number of bytes between the current readerIndex and the first occurrence if found. -1 otherwise.

bytesBefore

int bytesBefore(ChannelBufferIndexFinder indexFinder)
Locates the first place where the specified indexFinder returns true. The search takes place from the current readerIndex (inclusive) to the current writerIndex.

This method does not modify readerIndex or writerIndex of this buffer.

Returns:
the number of bytes between the current readerIndex and the first place where the indexFinder returned true. -1 if the indexFinder did not return true at all.

bytesBefore

int bytesBefore(int length,
                byte value)
Locates the first occurrence of the specified value in this buffer. The search starts from the current readerIndex (inclusive) and lasts for the specified length.

This method does not modify readerIndex or writerIndex of this buffer.

Returns:
the number of bytes between the current readerIndex and the first occurrence if found. -1 otherwise.
Throws:
IndexOutOfBoundsException - if length is greater than this.readableBytes

bytesBefore

int bytesBefore(int length,
                ChannelBufferIndexFinder indexFinder)
Locates the first place where the specified indexFinder returns true. The search starts the current readerIndex (inclusive) and lasts for the specified length.

This method does not modify readerIndex or writerIndex of this buffer.

Returns:
the number of bytes between the current readerIndex and the first place where the indexFinder returned true. -1 if the indexFinder did not return true at all.
Throws:
IndexOutOfBoundsException - if length is greater than this.readableBytes

bytesBefore

int bytesBefore(int index,
                int length,
                byte value)
Locates the first occurrence of the specified value in this buffer. The search starts from the specified index (inclusive) and lasts for the specified length.

This method does not modify readerIndex or writerIndex of this buffer.

Returns:
the number of bytes between the specified index and the first occurrence if found. -1 otherwise.
Throws:
IndexOutOfBoundsException - if index + length is greater than this.capacity

bytesBefore

int bytesBefore(int index,
                int length,
                ChannelBufferIndexFinder indexFinder)
Locates the first place where the specified indexFinder returns true. The search starts the specified index (inclusive) and lasts for the specified length.

This method does not modify readerIndex or writerIndex of this buffer.

Returns:
the number of bytes between the specified index and the first place where the indexFinder returned true. -1 if the indexFinder did not return true at all.
Throws:
IndexOutOfBoundsException - if index + length is greater than this.capacity

copy

ChannelBuffer copy()
Returns a copy of this buffer's readable bytes. Modifying the content of the returned buffer or this buffer does not affect each other at all. This method is identical to buf.copy(buf.readerIndex(), buf.readableBytes()). This method does not modify readerIndex or writerIndex of this buffer.


copy

ChannelBuffer copy(int index,
                   int length)
Returns a copy of this buffer's sub-region. Modifying the content of the returned buffer or this buffer does not affect each other at all. This method does not modify readerIndex or writerIndex of this buffer.


slice

ChannelBuffer slice()
Returns a slice of this buffer's readable bytes. Modifying the content of the returned buffer or this buffer affects each other's content while they maintain separate indexes and marks. This method is identical to buf.slice(buf.readerIndex(), buf.readableBytes()). This method does not modify readerIndex or writerIndex of this buffer.


slice

ChannelBuffer slice(int index,
                    int length)
Returns a slice of this buffer's sub-region. Modifying the content of the returned buffer or this buffer affects each other's content while they maintain separate indexes and marks. This method does not modify readerIndex or writerIndex of this buffer.


duplicate

ChannelBuffer duplicate()
Returns a buffer which shares the whole region of this buffer. Modifying the content of the returned buffer or this buffer affects each other's content while they maintain separate indexes and marks. This method is identical to buf.slice(0, buf.capacity()). This method does not modify readerIndex or writerIndex of this buffer.


toByteBuffer

ByteBuffer toByteBuffer()
Converts this buffer's readable bytes into a NIO buffer. The returned buffer might or might not share the content with this buffer, while they have separate indexes and marks. This method is identical to buf.toByteBuffer(buf.readerIndex(), buf.readableBytes()). This method does not modify readerIndex or writerIndex of this buffer.


toByteBuffer

ByteBuffer toByteBuffer(int index,
                        int length)
Converts this buffer's sub-region into a NIO buffer. The returned buffer might or might not share the content with this buffer, while they have separate indexes and marks. This method does not modify readerIndex or writerIndex of this buffer.


toByteBuffers

ByteBuffer[] toByteBuffers()
Converts this buffer's readable bytes into an array of NIO buffers. The returned buffers might or might not share the content with this buffer, while they have separate indexes and marks. This method is identical to buf.toByteBuffers(buf.readerIndex(), buf.readableBytes()). This method does not modify readerIndex or writerIndex of this buffer.


toByteBuffers

ByteBuffer[] toByteBuffers(int index,
                           int length)
Converts this buffer's sub-region into an array of NIO buffers. The returned buffers might or might not share the content with this buffer, while they have separate indexes and marks. This method does not modify readerIndex or writerIndex of this buffer.


hasArray

boolean hasArray()
Returns true if and only if this buffer has a backing byte array. If this method returns true, you can safely call array() and arrayOffset().


array

byte[] array()
Returns the backing byte array of this buffer.

Throws:
UnsupportedOperationException - if there no accessible backing byte array

arrayOffset

int arrayOffset()
Returns the offset of the first byte within the backing byte array of this buffer.

Throws:
UnsupportedOperationException - if there no accessible backing byte array

toString

String toString(Charset charset)
Decodes this buffer's readable bytes into a string with the specified character set name. This method is identical to buf.toString(buf.readerIndex(), buf.readableBytes(), charsetName). This method does not modify readerIndex or writerIndex of this buffer.

Throws:
UnsupportedCharsetException - if the specified character set name is not supported by the current VM

toString

String toString(int index,
                int length,
                Charset charset)
Decodes this buffer's sub-region into a string with the specified character set. This method does not modify readerIndex or writerIndex of this buffer.


toString

@Deprecated
String toString(String charsetName)
Deprecated. Use toString(Charset) instead.


toString

@Deprecated
String toString(String charsetName,
                           ChannelBufferIndexFinder terminatorFinder)
Deprecated. Use bytesBefore(ChannelBufferIndexFinder) and toString(int, int, Charset) instead.


toString

@Deprecated
String toString(int index,
                           int length,
                           String charsetName)
Deprecated. Use bytesBefore(int, int, ChannelBufferIndexFinder) and toString(int, int, Charset) instead.


toString

@Deprecated
String toString(int index,
                           int length,
                           String charsetName,
                           ChannelBufferIndexFinder terminatorFinder)
Deprecated. Use bytesBefore(int, int, ChannelBufferIndexFinder) and toString(int, int, Charset) instead.


hashCode

int hashCode()
Returns a hash code which was calculated from the content of this buffer. If there's a byte array which is equal to this array, both arrays should return the same value.

Overrides:
hashCode in class Object

equals

boolean equals(Object obj)
Determines if the content of the specified buffer is identical to the content of this array. 'Identical' here means: Please note that it does not compare readerIndex() nor writerIndex(). This method also returns false for null and an object which is not an instance of ChannelBuffer type.

Overrides:
equals in class Object

compareTo

int compareTo(ChannelBuffer buffer)
Compares the content of the specified buffer to the content of this buffer. Comparison is performed in the same manner with the string comparison functions of various languages such as strcmp, memcmp and String.compareTo(String).

Specified by:
compareTo in interface Comparable<ChannelBuffer>

toString

String toString()
Returns the string representation of this buffer. This method does not necessarily return the whole content of the buffer but returns the values of the key properties such as readerIndex(), writerIndex() and capacity().

Overrides:
toString in class Object


Copyright © 2008-2011 JBoss, a division of Red Hat, Inc.. All Rights Reserved.